Miscellaneous Tips

High-Impact Nylon 6 for Industrial Hammer Tips Endures Rugged Metal-Pounding Use While Bypassing Lengthy Post-Molding Step
Miscellaneous Tips

High-Impact Nylon 6 for Industrial Hammer Tips Endures Rugged Metal-Pounding Use While Bypassing Lengthy Post-Molding Step

Custom Molder Austmould Uses Chemlon® 280 Nylon 6 from Teknor Apex Asia Pacific to Produce the Tips for Hammers that Must Absorb the Shock of Repeated Blows MOORABBIN, VICTORIA, AUSTRALIA - A toughened nylon 6 compound from Teknor Apex Asia Pacific Pte Ltd. has enabled custom molder Austmould Pty Ltd. to injection mold tips for industrial deadblow hammers that withstand rigorous impact...

Read More »
Miscellaneous Tips

RFID Tag-Embedded Pipettes streamline calibration assessment.

To support pipette management efforts, premium Rainin air displacement pipettes, including E4 XLS electronic model, feature embedded RFID tags that help labs establish calibration schedules through tracking. Combination ofÂ- pipettes, RFID reader, and LabX Direct Pipette-Scan software lets users immediately determine individual pipette's complete profile to determine if calibration is...

Read More »
Miscellaneous Tips

Rainin E4 XLS Proves Key to Mastering Multiple Pipette Applications

The Rainin E4 XLS continues to save time, money and operator hand-health by extending users application ranges, enabling faster, more precise genomic, proteomic and cell culture experimentation. After nearly a year on the market, the flexible, accurate Rainin E4 XLS family of electronic pipettes from METTLER TOLEDO continues to prove its worth by helping users master a wide range of life science...

Read More »
Metal Tapper Tips facilitate high-speed dispensing.
Miscellaneous Tips

Metal Tapper Tips facilitate high-speed dispensing.

Available in 18–30 gauge sizes, MT Series features smooth internal conical fluid path, which minimizes clogging and back pressure for maximum flow rates.Â- Thin wall design at tip optimizes dispensing accuracy while simultaneously lessening fluid tailing and stringing. Color-coded for identification, tips range in size from 0.009 in. ID/0.012 in. OD to 0.041 in. ID/0.049 in. OD. Metal...

Read More »
PTFE-Lined Tips are available in shorter length.
Miscellaneous Tips

PTFE-Lined Tips are available in shorter length.

At 0.5 in. long, Teflon® Lined Series Tip is suited for use with low-viscosity fluids and fluids incompatible with metal. Tip length allows for accelerated dispensing, and other benefits include protection against Cyanoacrylate cloggingÂ- as well as prevention of damage to substrates. Construction includes double helix Polypropylene color hub and rigid Teflon®...

Read More »
Pipette Tips provide access to deep and narrow labware.
Miscellaneous Tips

Pipette Tips provide access to deep and narrow labware.

Made using 100% premium-grade virgin polypropylene, Span-8 P50 Conductive Pipette Tips offer access to Microfuge tubes, 1.4 L storage tubes, and deep-well plates. Units feature fine point that facilitates transfer of small sample volumes characteristic of assay miniaturization. Liquid-level sensing technology in Biomek workstations allows pipetting from top of liquid rather than bottom of tube or...

Read More »
Pipette Tips optimize large volume transfers.
Miscellaneous Tips

Pipette Tips optimize large volume transfers.

Available for Biomek NXP and FXP Laboratory Automation Workstations, clear, non-conductive Biomek P1000 Span-8 Tip lets users visually inspect aspirated volumes and transfer full 1 mL of sample or reagent in single pipetting action without having to split volumes. P1000 Span-8 Wide Bore Pipette Tip, offering larger orifice, facilitates pipetting of viscous liquids or samples with large...

Read More »
Miscellaneous Tips

General Carbide Application Profiled in August 2010 Issue of Canadian Forest Industries Magazine

Greensburg, PA, - General Carbide Corporation, a manufacturer of tungsten carbide tooling for a variety of industrial applications, was the subject of an item in the August 2010 issue of Canadian Forest Industries magazine. Text of the article, titled Tough Tip: A team effort results in the development of a sustainable carbide saw chain tip for use in harsh environments," follows. When Indigo...

Read More »
Tregaskiss Upgrades TOUGH LOCK Contact Tip System with New Technology
Miscellaneous Tips

Tregaskiss Upgrades TOUGH LOCK Contact Tip System with New Technology

WINDSOR, Ontario - September 16, 2009 - Adding to its already high-performing TOUGH LOCK(TM) Contact Tip System, Tregaskiss has upgraded the design of its TOUGH LOCK Retaining Heads. At no additional cost to its customers, the TOUGH LOCK Retaining Heads now feature Tregaskiss' Dual Taper Technology - a second rear taper between the gooseneck and the contact tip. This design further improves...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics