New Electrical Equipment & Systems Products

Multiprotocol Transceiver supports 8 different protocols.

Capable of data rates up to 20 Mbps, Model SP3508 single-chip transceiver enables data communications between nodes in Wide Area Network applications. Through operating power supply of 3 V, TTL I/O lines are conditioned to LVTTL signal levels. Device incorporates intelligent charge pump, 8 transmitters, 8 receivers, and 1 Ã-µF charge pump capacitors. It operates in DTE or DCE mode and...

Field-Bus Connector has spring technology.

ProfiBus and CanBus series field bus connectors with cage clamp connection options contain latching spring clip that requires users to open clip, insert wire or stranded core, and close clip to make connections. Offered with cross sections from 0.14-0.5 mm, product types include those with switches and versions with simple nodes and connections for reliable use in field-bus systems. Versions are...

Isolated DC/DC Controller integrates opto drive.

Model LT3804 is a 100 W, secondary side, DC/DC regulator for dual output isolated power supplies. Housed in 28-lead TSSOP package, it converts 36-72 V supplies to output voltages of 5, 3.3, 2.5, 1.5, and lower at up to 50 W per output. Differential Kelvin voltage sensing is used for each output feedback. Model LT3804 operates with switching frequencies from 200-800 kHz. It contains error...

Li-Ion Battery Charger requires no external components.

Model LTC4058 charges single-cell 4.2 V Li-Ion batteries from 4.25-6.5V input sources in constant-current and constant-voltage modes. It operates autonomously, independent of firmware for battery monitoring, charge termination, and protection. Thermal regulator guarantees maximum charge current regardless of ambient temperature. By combining voltage reference with remote battery sensing, unit...

Direct Acting High Speed Servo Valve (DASV)

Download this paper to learn about how high performance servo valve's can be used in your most demanding hydraulic and pneumatic applications.

M16 Connectors are offered with molded plug body.

Multifast 12, 14, and 19-pin M16 thread connectors are available with PVC, PUR, or flexilife-10Ã-® cable jacket. Cords come with male or female, straight or right-angle connectors, in standard or custom lengths, and as pigtail or extension cords. Connectors provide protection that meets UL, CSA, NEMA 1, 3, 4, 6P and IEC IP68 standards. They are rated for 60 Vac/dc at 4 A and are suited for...

Multi-Purpose Enclosure provides Type 1 protection.

Offered with integral 10-gauge steel base, free-standing enclosure acts as housing solution for PLC/main control panels, power distribution cabinets, and HVAC applications in clean environments. It is available in 11 sizes from 48 x 25 x 12 in. to 84 x 36 x 24 in. Component mounting options include panel and 19 or 23 in. rack angle mounting. Offerings include removable back cover and reversible...

I/O Enclosure has multiple connector options.

Made of Lexan Polycarbonate, FieldBlock bus network drop connection and I/O enclosure incorporates corrosion-proof design suited for general-purpose and nonincendive process networking applications with flexible wiring systems. Users may select from multi-drop or switched drop connectors, I/O or relay modules, and special module configurations. Enclosure is fully sealed for use in heavy wash-down...

Variable Frequency Drive Cables protect motors and components.

Industrial Series - Series V Cables incorporate thermoset insulation to help prevent meltdown during corona discharge and voltage spikes, tightly-fitted shields to reduce probability of corona discharge, and large insulation walls to reduce capacitance. Open Wiring Rated, cables feature tinned copper conductors that range from 16 to 2 AWG for motors in Ã-½-100 hp range. Cables are sunlight...

Custom Level Switches have up to 6 reed switch outputs.

Series 312 switches can be constructed in lengths from 1-4 ft and have switch point tolerance of Ã-

Connector streamlines steam-in-place processes.

Designed for biopharmaceutical applications, Steam-Thru(TM) Connection (STC) serves dual function of valve and connection. Product enables biopharmaceutical companies to sterilize flow path and initiate connections between bioreactor and media bag without adding plumbing connections. Unit utilizes steam trap to rid connection of steam during sterilization process and reduces validation concerns...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.