New Electrical Equipment & Systems Products

Connectors offer flexible solution for electrical devices.

Series 862 is rated 300 V/20 A or 600 V/5 A and can terminate wire sizes 20-12 AWG. Connectors feature snap-in mounting feet or self tapping screw, built-in test points, and integrated ground contact. Four connection points per pole allow wiring of different gauge conductors, power distribution, or daisy chaining. CAGE CLAMPÃ-® spring pressure technology allows solid wire or stranded wire...

Modular Stepper Motor offers holding torque of 4 oz-in.

Model 3609Z measures 36 mm in diameter, 12 mm thick, and weighs 1.7 oz. Windings are encapsulated with thermally conductive, ceramic-based polymer, which allows heat to be drawn away from windings. With step accuracy of Ã-

Miniature Rockers feature full-face LED illumination.

Available with red, green, or amber LEDs, CWSC Series snap-in mounted rockers have even LED color distribution for visible status indication. Products are offered in DPST circuit and are rated at 9 A @ 125 Vac or 6 A @ 250 Vac. Interior shield prevents contamination of rocker by carbon from any arcing, while single-break, snap acting contact mechanism provides smooth actuation and audible,...

Electrical Connector links solar modules to DC/AC converters.

SOLARLOK interconnection system allows for assembly using hand tools or high speed, semi-automatic applicators. Flexible, UL and TUV approved system accommodates serial and parallel solar module connections. Silver-plated, copper alloy contacts, rated at 25 A, offer contact resistance of 1 milliohm or less. Connector housings are offered with positive and negative polarity keying. Weatherproof...

The Ultimate Guide To Electro-Mechanical Assemblies & Box Builds

This ebook provides an in-depth guide to electro-mechanical assemblies and box builds.

Safety Switch utilizes multi-magnet technology.

ISIS Safety Switch achieves 6 mm switching in tamper-resistant, resin-filled ABS or stainless steel body with IP67 protection rating. Available in range of voltages, ISIS control units monitor open and short circuit faults while providing 2 NO safety contacts and one NC auxiliary contact. Control units can monitor up to 2 or 4 safety switches, depending on model, and can monitor E-Stop buttons,...

Microcontroller provides high-speed 8051 processing.

Offered with on-chip debug circuitry, C8051F120 microcontroller family features 100 MIPS (peak) 8051 CPU; 2-cycle, 16 x 16 Multiply-Accumulate unit; and 12-bit ADC and DACs. Suited for mixed-signal embedded control applications that require signal processing, series includes 128 Kbyte Flash memory, 8448 bytes RAM, and is packaged in 100- and 64-pin TQFP. On-chip peripherals include 2% internal...

Power Supply meets external power needs.

Model PW132 101 W switch mode power supply, featuring 100-240 Vac input power, provides regulated output with low ripple, and complies with EMI/RFI regulations. Typical electrical efficiencies are 85% and mean time before failure exceeds 100,000 hours. Applications include medical monitors/displays and respirators, point-of-sale terminals, wireless local area networks, and satellite receivers.

Uninterruptible Power Supplies expand to 500 kVA.

Digital Energy(TM) SG Series, built on digital processing design, features redundant architecture that eliminates single points of failure. Extremely low output voltage distortion results in very clean output waveform. Units include Space Vector Modulation, output isolation transformer, and automatic start-up procedure with user-friendly interface. Integrated input filter reduces input current...

UPS Systems support company's xSeries-® towers.

Uninterruptible power supplies provide power protection, extended run-time power backup, and smart power management. Units are offered with 3 VA points with up to 1,500 VA and 1,050 W load capacity. USB and serial communications are incorporated as standard, and UPS management software integrates with IBM Director for seamless systems management. Units come with 6-8 outlets, depending on model,...

Network Interface Cards work with BladeCenter eServers.

Nortel Networks Layer 2-7 GbE Switch Module Option for BladeCenter server chassis resides in network slot. It connects to server blades via 14 internal GE interfaces over BladeCenter mid-plane and provides 4 external GbE interfaces. BladeCenter Gigabit Ethernet Expansion Card provides processor blade with 2 additional Gb interfaces. Myrinet Cluster Ethernet Adapter functions with Linux and...

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.