Liquid Level Switch handles contaminated tank fluids.
Stainless steel, Swing Arm Model L90SA comes with one or two 100 Va, single or double throw switches for single or dual point operation. Clearance between moving arm and mounting stem provides self-cleaning action with each movement. Rated to 300Ã-
Read More »
Vibration Monitor is CSA certified.
Enclosed in water-tight, industrial-type housing, Model 550-CSA Vibration Switch monitors rotating machinery operating at 120-60,000 rpm for excessive vibration caused by unbalance, worn bearings, mechanical looseness, and broken parts. Product features 2 adjustable vibration limits with time delays, limit LED indicators, system test button, and automatic limit resets.
Read More »
Pressure Sensor suits pulp and paper/forestry industry.
Multi-function SGTÃ-® Electronic Pressure Instrument combines functions of dual switch, gage, and transmitter into loop-powered device. It provides 2 relays, local indication, and 4-20 mA output. Suited for Class 1, Div 2 hazardous locations, unit includes self-diagnostics, on-line testing, and password protection for reliable monitoring and control. It offers ranges from 10-2,000 psig/psia...
Read More »
Synchronous Boost Converter has 5 A switch current.
Low-profile LTC3425 incorporates 4-phase switching topology, operates at frequencies up to 8 MHz, and delivers output voltages of up to 5.25 V from input voltage range of 0.5-4.5 V. It provides up to 3 A continuous output current from 32-lead, 5 x 5 mm QFN package with less than 2 mm profile. Internal switches deliver efficiencies as high as 95%. Automatic or manual Burst ModeÃ-® operation...
Read More »
Guide To Swageless Fittings
Electroline specializes in innovative, easy-to-install swageless fittings. The following guide will highlight everything you need to know about swageless fittings.
Read More »
Terminal Blocks have current ratings up to 85 A.
With spacing from 14.22-15.88 mm, EAGLE Series B, C, D, FP, FS, G, and GT line is composed of industrial terminal-blocks in pcb and panel-mount versions, with current ratings from 25-85 A and voltages from 300-600 V. B Series is composed of 150Ã-
Read More »
Hall-Effect Switches feature latched digital output.
Models A3213 and A3214 micropower, omnipolar digital switches have nominal current consumption of 300 Ã-µA and 5 Ã-µA respectively, and operate from battery voltages of 2.4-5.5 V. Model A3212 for 2.5-3.5 V operation is offered in ultra-slim micro lead-frame package measuring 0.75 mm high x 2 mm long and 3 mm wide. All switches are suited to detection of open/closed positions in...
Read More »
Cable-Blowing Machine installs micro-fiber cable.
Portable Breeze micro-fiber cable blowing machine features compliant double-driven rollers for secure grip of cable. Tornado, with hydraulic power pack, moves fiber-optic cable of 0.23-1.25 in. dia at speeds to 300 fpm into pre-installed innerduct or direct-buried duct. Model C2 Cable Lasher provides cable or bundle capacity from 1 5/8-1 7/8 in. and overlash capability. Duct Rodders are...
Read More »
Modulators/Power Supplies provide up to 500 kV cathode voltage.
PowerMod(TM) Solid-State Radar Upgrades replace switch and voltage regulator tubes and crowbars up to vacuum electron devices with high voltage modulators and power supplies. Featuring >.01% pulse-to-pulse stability, they have produced 300-500,000 hr MTBF. Qualified for shipboard and ground applications, upgrades can provide multi-megawatts average power, pulse widths from 100 ns to milliseconds,...
Read More »
RF Connectors suit high frequency/low impedance applications.
Offered in SMA, SMB, MCX, MMCX, DIN 1.0/2.3, BNC, TNC, N, and F interface styles, RF connectors are available with standard 50 ohm and optional 75 ohm impedance. All styles are offered in PCB- and cable-mount versions and various design configurations: cable-crimp, cable-clamp, bulkhead, flange-mount, straight, and right-angle. With performance capabilities out to 18 GHz, products suit...
Read More »
Enabling Switch meets ANSI-RIA 15.06 safety standard.
Series ZSD robot/machine enabling switch features OFF-ON-OFF operating positions. Equipment power is only enabled when switch actuator is held in center position. Power is removed if operator releases or fully squeezes actuator, as may occur in emergency situations. Optional top-mounted pushbutton may be used for running/jogging equipment when powered.
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
