New Electrical Equipment & Systems Products

Telecom Relay suits low power consumption designs.

With 16 pin DIP footprint, model AZ8222, 2-pole telecom relay has DC coils from 3-48 Vdc in 3 sensitivities: Standard (320 mW), Sensitive (200 mW), and Ultra-Sensitive (150 mW). Bifurcated cross-bar contacts and switching capacity of 60 W or 125 VA make product suited for use in low power consumption designs. Unit meets FCC Part 68 requirements for 1,000 Vrms dielectric strength and 1,500 V...

Switching Relay Modules suit real-time control applications.

Electromechanical relay modules allow control and design engineers to perform relay switching on high and low-voltage AC/DC signals. Products withstand 50 g shock and 5 g RMS vibration. Model cFP-RLY-421 includes 8 Form A, SPST relays, while cFP-RLY-423 delivers 4 Form C, SPDT relays. Each channel on modules uses relay with separate ground plane. Units can switch up to 250 Vac or 35 Vdc at 1.5 A...

Welder/Power Generator provides 10,000 W peak power.

Ranger(TM) 10,000 allows operators to simultaneously weld and use AC generator power. At 100% duty cycle, machine is rated 225 A for AC Stick welding, 210 A for DC Stick welding, and 200 A for CV wire welding. Full KVA 120/240 V outlet allows operators to run high-capacity motors, while four 120 V outlets provide auxiliary power. Unit is available with KohlerÃ-® or HondaÃ-® 2-cylinder,...

Stainless Steel Motors withstand washdown environments.

WashguardÃ-® SST(TM) range from 1/3 to 2 hp and 1,750 and 3,450 rpm. All external surfaces such as frames, endbells, mounting base, fan guard, hardware, conduit box, and cover are 300 series stainless steel. Oversized, double-sealed bearings are pre-lubricated with moisture-resistant high-temperature grease. Stainless steel T-drains are provided for drainage of condensation while preventing...

The Ultimate Guide to Packaging Automation Solutions

This ebook provides an in-depth guide to packaging automation solutions.

Snap-Action Switches use same form for entire current range.

Using same physical form, D3V miniature snap-action switches are available with contact ratings of 0.1, 6, 11, 16, and 21 A. Products incorporate self-cleaning wiping contacts and are available with internal or external levers. Suited for applications from home appliances and office equipment to HVAC systems and vending machines, switches are offered with choice of terminal options suited for...

General Purpose Relays are suited for global applications.

GP Relays offer various plug-in relays and sockets in Octal Base, Square Base, Flange Mounted, and Miniature Square Base. Pin and blade terminals provide current ratings from 5-25 A and pole ratings from 1-4. Optional mechanical actuators and indicating lights simplify checking of control circuit operation and troubleshooting. Relays are CE marked for use and acceptance in global applications.

Dimming Ballast suits range of CFL applications.

Mark 7(TM) Electronic Dimming Ballast supports 8 compact fluorescent lamp/ballast combinations including 13 W and 18 W applications. It includes programmed-start lamp ignition, total harmonic distortion below 10%, color-coded poke-in connectors, lamp end-of-life protection circuitry, and operation above 42 kHz. Unit dims lamps directly from compatible 0-10 V controls, including occupancy sensors,...

RF connectors are suited for vehicle applications.

Featuring all-metal construction, FAKRA RF connectors are available in 1-, 2- and 3-way versions. Single-piece, die-cast connectors have center of gravity that allows PCB mounting. Rated at 0-4 GHz, devices are color-coded in accordance with FAKRA standard. Available versions include Code A, black (DAB); Code B, natural (DAB with power); Code C, blue (GPS); and Code D, violet (cell phone)....

PWM Controller suited for DC/DC power converters.

Low-profile (1 mm) 6-pin ThinSOT(TM) PWM LTC3803 current mode DC/DC controller works with flyback power supplies with 1-25+ W of output power. With adjustable slope compensation and 40 Ã-µA start-up current, product offers integrated soft-start function and can be powered with inputs from 10-100 V through resistor. Unit operates at constant 200 kHz frequency, provides Ã-

Battery Charger supports multi-year back-up applications.

Model LTC4064, housed in 5 x 3 mm footprint 10-lead MSOP package, charges to float voltage of 4 V to slow battery aging and capacity degradation during periods of non-use. Unit autonomously performs charging, pre-conditioning, charge termination, re-charging, temperature monitoring, and fault detection. Thermal regulation allows maximum charge current without risk of overheating, while external...

SRG Global Coatings Enhance Surface Durability, Efficiency, Design Flexibility

SRG Global's automotive coatings enhance the structural integrity of the finished part while also improving vehicle efficiency. Check out our video to learn more.