New Test & Measurement Products

Finishing Process tests 12,000 power devices per hour.

Model M232 test/handling system for power devices completes device finishing processes for D-Paks and TOs. It has 32-position turret that accommodates up to 8 test stations for parallel testing. Each device undergoes electrical test, is laser-marked and inspected for mold and mark quality, and finally has 3D-lead inspection. Rejects are loaded into tubes. Part loading is via tube loader or direct...

Elemental Analyzer has single furnace for faster runs.

EA3000 performs combustion and reaction in a single furnace configuration, making runs faster and easier. It has automatic, pressurized oxygen injection to ensure complete combustion and tighter tolerances, and software for instrument control and data analysis.

Linear Height Gage is battery powered and portable.

Series 518 Linear Height Lite makes high accuracy, vertical measurements with selectable resolution settings of 0.00005, 0.0001 or 0.005 in. Readings are presented on large LCD that indicates measurement parameters in use. Absolute type linear encoder allows origin point and other settings to be retained even when power is switched off so there is no need to reset with each use. Two versions are...

Cal-Gas Standards Generator calibrates gas analyzers.

Model 491MB Gas Standards Generator is designed to calibrate gas analyzers such as gas chromatographs, mass spectrometers, and ion mobility spectrometers. 491MB uses Trace Source(TM) Permeation Tubes to generate low concentrations (1000 ppm to ppb) gas standards for VOCs, Acid Gases, Amines, Sulfurs, and Hydrocarbons (400+ compounds). Standards are traceable to NIST.

How to Choose the Right Vacuum Chamber

To learn more about avoiding the pitfalls in choosing a vacuum chamber manufacturer and KTC's expertise in this area, download this white paper now.

Flowmeter is accurate to -

Vortex Flowmeters feature turndown ratios of up to 80:1. Their dual signal processing technology independently measures each vortex on either side of bluff body and eliminates noise. Vortex Flowmeters are available in both inline and insertion versions. Inline versions are available with ANSI and DIN flanges.

Electric Samplers are designed for use in remote sites.

710EL samplers, suitable for most liquids, take large number of individual sample grabs of 1 cc or 3 cc that together accurately represent quality of fluid. Sampling rate is up to 50 per minute. Units comprise probe and cell sampler which both use electric motor directly coupled to sampler. Two probe lengths are offered, for use in 8 in. to 52 in. pipelines which can be mounted in any orientation...

Indicator can be adjusted from 100 to 1999 counts.

DIS471B-24 process indicator, available with dc voltage and current inputs to monitor process signals, features auxiliary 24 Vdc (35 mA maximum) power supply for powering external equipment. Digit display has 0.56 in.-high red LED indicators. Indicator mounts through front panel in 1/8 DIN cutout. When properly mounted, it meets NEMA-4 requirements for being liquid-tight. Unit includes selectable...

Calibrator for pressure, temperature and electrical.

Portable MC3 Series is available with pressure in three ranges up to 2,400 psi and optional barometric reference. Electrical section offers V, mA, Hz measurement, pulse counting, mA generation, switch testing and 24 Vdc loop supply. Temperature section has t/c, RTD, Ohm and mV measurement and generation, and V, mA, Hz and pulse generation. Calibrator is available in three configurations with...

Digital Weight Indicator is for new or existing systems.

Model 4215 indicator can connect to PC and graphical user interface. Front panel has 999,999 display, 6 smart pushbuttons, 2 buttons for displayed item and displayed units selection, tare, peak and hold reset, alternate display view, and print. All menu buttons have alternate functions for setup menus. Programmed operations include peak hold and tracking, math, function channels, and limits....

Vision Inspection System can download inspection files.

Vision inspection system consists of PresencePLUS2(TM) vision sensor, CLO1 Operator Interface Terminal, and Edict-97 software. Edict-97 software includes drivers for PresencePLUS2 sensors, and PresencePLUS2 Windows software interfaces directly to CLO1 HMI. Users set inspections to be run, and save inspection parameters on Windows PCs. Saved inspections (.inp files) are transferred from PC to CLO1...

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.