Grease Gun is battery powered.
Cordless model 585 can develop 10,000 psi for unclogging problem fittings. It incorporates 14.4 V motor with thermal protector and optimized airflow for extended motor life. Ergonomic design, balanced feel, and optional carrying strap facilitate lubrication process and reduce physical strain on operator. Unit comes with flexible, 3 ft long hose, which aids in lubricating stubborn parts.
Read More »Chop Saw Blade cuts thick metal stock.
With zirconia grain design, double-reinforced, angle iron chop saw blade cuts all ferrous metal applications such as iron/steel bar, metal decking and cable, pipe line, wall studs, high-tensile steel, stainless steel sheets, and stainless steel bars. Blade is 14 x 3/32 x 1 in. and can run at speeds up to 4,400 rpm.
Read More »
Air Hammer Accessory Kit offers frequently used accessories.
Heavy Duty Air Hammer Set PHG3050CH4 contains PH3050 Air Hammer, which cuts through various materials by delivering 1,750-2,500 blows per min, flat chisel, double blade panel cutter, tapered punch, and muffler cutter accessories. Universal retainer chuck is also included, allowing operators to safely interchange and engage accessories with air hammer. Plastic carrying case offers multiple storage...
Read More »
Magnet Wire Stripper processes variety of material types.
Heavy-Duty Model E300 processes varnish, enamel, polyester, glass, and resin from round wire between 1-20 AWG, square wire up to Ã-¼ in., or rectangular wire up to Ã-¼ x 2 in. Counter-rotating stripping wheels offer smooth stripping motion for operator. Dust take off port is included for connection to dust removal system.
Read More »
Fastener Technical Resource Guide
This fastener technical resource guide will show you how to specify nuts, points, heads, washers and more.
Read More »
Stainless Steel Drive Sockets suit cleanroom applications.
Suited for sterile production environments, 3/8 in. drive Deep Sockets feature 17-4PH stainless steel construction and are designed for repeated autoclaving. For applications that require longer reach and greater internal clearance, 6-point sockets measure 2Ã-½ in. long and are available in inch sizes from Ã-¼-11/16 in. Metric sizes range from 6-19 mm. Hardened to HRC 44, sockets are...
Read More »
Mining Jumbo employs twin boom design.
Axera 7 mining jumbo suits applications where heading size ranges from 4 x 4 to 6 x 6 m. Equipped with HLX5-series hydraulic rock drill with 20-22 kW percussion power rating, product drills cross-cuts and bolt holes as well as blast holes from 1 11/16 to 2-½ in. It works with drifter rods up to 16 ft long and comes with two 55 kW electro-hydraulic power packs and articulated carrier with...
Read More »
Hydraulic Rotary Hammer Drill uses up to 1 in. dia bits.
Designed for percussion drilling of anchor and thru-holes in concrete, rock, and masonry, Hydraulic Rotary Hammer Drill delivers 3,400 blows/min and uses SDS-Plus shank carbide tipped bits. Product can be switched to rotary mode for drilling steel and wood. Features include safety clutch, adjustable side handle with depth gauge, and sealed gears with permanent lubrication. Weighing 15 lb, product...
Read More »
Stainless Steel Cabinets hold tools and equipment.
Made from 12-gauge all-welded stainless steel, wardrobe-style cabinets have 3-point locking mechanism in door to securely store equipment and valuables. All units are equipped with three 14-gauge shelves and one hanger rod. Also available: 4-drawer models with two 3 in. high drawers and two 4 in. high drawers, and 7-drawer models with four 3 in. high drawers and three 4 in. high drawers. All...
Read More »
Metal Cutting Saw provides clean and burr-free cutting.
Model 4131 7Ã-¼ in. saw features 13 A motor that cuts through sheet metal, steel studs, pipes, and rebar. No-load speed of 3,500 rpm and large cutting capacity enable single-pass cutting that is virtually spark-free. Heavy duty blade cover provides chip collection and insulates against high temperatures. Saw, with overall length of 11 in. and weighing 10.6 lb, is equipped with heat-resistant...
Read More »
Wing and Flag Tools feature ergonomic handle.
Suited for insertion and removal of insert tooling in oily environments, Wing and Flag style tools are offered in range of Star and Star plus sizes from T5-T20. Handle features hard thermoplastic core for split resistance, and soft rubber outer coating for comfort and secure grip. Tools are ProtaniumÃ-® steel with Proguard(TM) finish for corrosion protection.
Read More »
Solder Redefined
Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.
Read More »
