New Electrical Equipment & Systems Products

Connector contains integrated electronics.

ID-Module contains integrated electronics including E2PROM with data storage capacity of 128 Bytes. Module provides non-volatile memory for decentralized storage of process parameters and coding of machine parts within industrial connector. Communication with ID-Module can be achieved with digital 24 V I/O unit using IÃ-²C-bus protocol. Module is operated and programmed via standard PLC.

Level Switch provides machined, high pressure, bottle housing.

Model L500C Remote Chamber Level Switch mounts outside tank where inside mounting is impractical or impossible. Vertically installed unit features all brass or 316 SS body with 316L SS internal float assembly. It is rated for operating pressures to 750 psig at 70Ã-

Ethernet Solutions suit PLC/SCADA system integrators.

MOXA EtherDevice Server(TM) includes Reliable Redundant Ring Connection, Line-Swap Fast Recovery, and Auto E-mail Warning features. EDS-SNMP OPC Server software package collects SNMP data from Ethernet then converts data to OPC format. MOXA EtherDevice(TM) Switch EDS-308/305 Series supports IEEE 802.3/802.3u/802.3x, and provides relay output alarm by power failure or port break. MOXA Industrial...

Modular Jacks indicate transmit/receive and line status.

Right Angle RJ-45 Jack, with LED indicators, is fully shielded and has top and side grounding tabs for conductivity, panel grounding, and EMI/RFI protection. Snap-in board retention tabs provide additional stability after soldering. PCB-mount RJ45 is black Nylon 46, high-temp thermoplastic for wave and reflow soldering compatibility. Contact material is nickel-plated phosphor bronze with...

Hot Forging Process

Check out this white paper to learn about the benefits of hot forging.

Latching Power Relay suits HVAC applications.

Available in single and dual coil versions, AZ2500, 50 A, single pole single throw (SPST) relay handles up to 12,500 VA (50 A at 250 Vac). With dielectric strength of 4,000 Vrms from contact to coil, product requires 50 msec pulse to set or reset. Coil connections are made via PCB terminals with power connections made via heavy bus type rigid terminals. Applications include UPS systems, lighting...

DC/DC Converter provides 25-µs transient response.

PowerWatt 40 W converter features industry-standard pinout in 1/8 brick package. SMD and planar magnetics allow 60 W/cu in. power density. Unit provides 91% efficiency, and includes thermal and undervoltage protection, output synchronous rectification, 2:1 input voltage range, input-to-output isolation, soft start, external synchronization, and short circuit protection. It is suitable for...

GFCIs protect operators of power tools and hand lamps.

UL-listed Ground Fault Circuit Interrupters protect operators and equipment by interrupting electrical power when loads have potentially lethal ground current in excess of 4-6 milliamps. Manual reset of trip indicator prevents unmonitored equipment start-ups following fault or power outage. Fully portable, plug-in units are offered in 15 and 20 A, 120 and 240 V, 60 Hz ratings. They are suitable...

Flat Cables handle 50 million flex cycles.

LEONI-HPF High Performance Flex flat cables feature low-density jacketing and fluoropolymer insulation, enabling them to be used in densely packed, confined spaces. Customized hybrid designs allow for integration of wide range of components. Individual conductors and cable components can be mixed and matched. All materials used have very little outgassing, ageing, and wear, making cable suitable...

Gearmotors are suited for harsh industrial applications.

Dust-proof, 3-phase Danfoss Bauer Gearmotors are completely enclosed and comply with NEMA MG 1, IEC 34-1, and CSA C22.2 #100. Flange- or foot-mounted units are available with helical, shaft mounted, bevel, and worm gear motors that provide operation from 0.08-100 hp. Additionally, motors provide torque from 130 lb/in. to 140,000 lb/in. and speeds from 0.16-355 rpm.

Electrical Enclosures suit indoor or outdoor use.

Premier Series is available in 142 sizes, with heights from 10-60 in., widths from 8-60 in., and depths from 4-20 in. Enclosures are UL and cUL approved, and rated Type 4 and Type 12. Stainless steel units are rated Type 4X. Hidden, spring-loaded hinges allow for 180Ã-

5 and 13 Micron Resolve Columns with Greater Bed Stability

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.