New Electrical Equipment & Systems Products

Step-Up DC/DC Converter has Schottky diode and soft start.

Housed in 6-lead ThinSOT(TM) package, LT3461/A combines 40 V, 300 mA (ISW), low VCESAT (260 mV) switch that delivers efficiencies to 84% with onboard Schottky diode and soft-start capability. Using constant frequency and current mode architecture, it operates from 2.5-16 V input voltage. Constant switching frequency of 1.3 or 3 MHz enables low noise operation and use of ceramic capacitors and...

Switch Modules withstand demanding/hostile environments.

VME-based, high-density, hermetically sealed SVM switches are available in solid-state and electromechanical designs and support VME32/64 operation. Intelligent switching features, achieved in hardware, include scan list operation, programmable delays, interrupt driven triggering, and internal confidence checking. Safety interrupt is programmable fail-safe feature. Products address power, DC,...

Modular Coaxial Connectors offer 2, 3, or 4 ports.

CoSMID 75 ohm, surface mountable connectors incorporate plastic housing that can be plated and molded into various configurations. They feature 1.0/2.3 coaxial interface to CECC 22230 with typical reflection factor of less than 0.1 up to 500 MHz. Units can be processed through normal reflow soldering processes at temperatures up to 473Ã-

Protector Caps cover exposed ends to prevent worker injury.

Used around construction sites, PC-110 BarGardÃ-® caps protect workers from serious injury from exposed rods, rebar, pipe-end, and stems. They meet CAL OSHA Standards and fit Rebars No. 3-8, 3/8 to 1 in. dia. Products are bright lime green in color for visibility and withstand varied weather and temperature conditions. They install by slipping on and locking into place.

Guide to Switches for Your Application

Download this e-book to learn about the different types of switches available for pneumatic and hydraulic devices.

Card Edge Connectors accommodate 0.062 in. daughtercards.

Right-angle, high-density, double-row Card Edge Connectors feature 1 mm centerline spacing with more than 50 signals per linear inch. Units have selective gold plating and hairpin bellow contacts. They offer signal contact current rating of 1 A and daughtercard engagement force of 1.5 N per contact. Devices are provided in contact configurations from 2/4 to 50/100 in single increments, and may be...

Integrated Circuit drives mobile phone headset and speaker.

Model TS4851 includes digital volume control and audio amplifier. It also offers controllable gain for left and right audio channels, and separate mono input for a microphone. Model TS4855 includes extra input channel for handsfree microphone and audio amplifier that delivers 1.1 W of continuous RMS output power into 8 Ohm speaker with 1% THD+N. Each part has 32-step digital volume control and 8...

BNC Connectors maximize space utilization.

Series 6700/01BNC within-series adapters permit parallel routing of cables, either horizontally or vertically. Series 6717/18/19 coaxial connectors with adapters allow mounting of 2 BNC connectors in same PCB space. Both types are rated at 500 V with 5,000 mW insulation resistance, 50 W impedance, and 0-4 GHz frequency. BNC within-series adapters meet common BNC/F connector-interface...

BNC Connectors are designed for minimum return loss.

High-performance broadcast/HDTV-quality connector models 6702/03/04/05 are designed to meet broadcast standards with reduced return loss for signal clarity. Made with gold-plated brass center contacts, they offer true 75 ohm impedance and are accurately matched to Belden cables. Connectors are precision machined from brass and offer black nickel plating and high-density PTFE insulator material...

Transformer monitors current in low frequency applications.

Model ACST-260 monitors current up to 30 amperes at frequencies to 200 Hz. Constructed with UL recognized, Class B insulation system, unit meets dielectric strength of 3 kV and features turns ratio of 1:500.

Rack-Mount Enclosure houses up to 14 disk drives.

TotalStorageÃ-® FAStT EXP100 Storage Expansion Unit supports up to 14 FAStT 250 GB SATA disk drive modules, offering up to 3.5 TB of capacity per enclosure. Coupled with FAStT900 Storage Server, it lets users configure RAID protected storage solutions up to 56 TB. This 3U, 19 in. enclosure offers redundant 2 Gbps Fibre Channel connections to FAStT Storage Servers and redundant, hot swappable...

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.