New Electrical Equipment & Systems Products

Active Mixer suits wireless and cable applications.

LT5522 active downconverting mixer has RF input with on-chip transformer that is 50 ohm matched over wide frequency range. RF input and Local Oscillator (LO) ports can be driven differentially or single-ended with minimum external impedance matching components. Mixer provides third-order intercept performance of 25 dBm @ 900 MHz and 21.5 dBm @ 1.9 GHz; draws 56 mA supply current at 5 V; and comes...

Rocker Switches are environmentally-sealed.

Rated at 15 A @ 125/250 Vac or 30 Vdc, WR series switches have sealed construction that conforms to IP67 of IEC529 standards. Outer housing is constructed of heat-resistant resin that meets UL 94V-O flammability ratings. Available in both SPST and SPDT, they feature black or ivory caps and can be specified with solder lug, screw lug, or wire lead terminals. Dielectric strength is 1,250V AV min...

Switches and Keyboards withstand harsh environments.

Using ultrasonic technology, ActiveMetal(TM) products sense touch through solid metal. Switches, keypads, and keyboards are vandal-proof, waterproof, and explosion-proof. They are resistant to cleaners and solvents and easily sanitized. Products produce minimal EMI and are suited for Class 1 - Division 1-2, NEMA 12, NEMA 4X, and IP65 enclosures. Front surface of touch area can be flat, contoured...

Elastomeric Connectors suit portable and handheld devices.

Gold STAX(TM) zero-insertion-force connectors are composed of alternating layers of conductive and non-conductive silicone rubber. Interconnection is made by deflecting elastomeric connector between mirror image pad patterns on mating substrates. Gold-coated particles embedded within low-durometer silicone create thousands of conductive paths, providing multiple points of contact to substrate...

A Comprehensive Guide to E-Mobility and E-Aviation

This white paper provides a comprehensive guide to E-Mobility and E-Aviation.

Multi-Phase DC/DC Controllers support 40-120 A.

Series TPS4009x synchronous, DC/DC buck controllers manage 2, 3, or 4 phases and can operate each phase at switching frequency up to 1 MHz, resulting in ripple frequency up to 4 MHz at input and output in 4-phase applications. Single-chip, PWM devices include current sense fault protection, programmable over current protection, and individual phase current detection. They offer more than 90%...

DIN Rail Adapter works with pin and socket connectors.

Combining benefits of using pin and socket connector with convenience of DIN rail mounting, adapter for MATE-N-LOK cap housings allows wire and harness installers to bring 2 ends of cable assembly or wire harness together at DIN rail mounted location. Since connectors are part of wiring harness, entire completed harness can be installed, minimizing difficult point-to-point wiring installation...

Latching Power Relay handles 100 A at 240 Vac.

Model AZ2510 SPST Relay features dielectric strength of 4,000 Vrms from contact to coil and 2,000 Vrms between open contacts. It requires 50 msec pulse to either Set or Reset. Single and dual coil versions are available. Coil connections are made via PCB terminals, and power connections are made via heavy, bus-type, rigid terminals with threaded holes. Relay includes manual position indicator,...

Plastic Belt is USDA compliant for direct food contact.

Model PWO500 modular plastic wire replacement belt features open hinge design that promotes abrasive release and cleanability. Belt provides product support as well as ample openings for drainage and airflow. Inverted funnel surface openings allow breading or debris to fall through instead of accumulating on belt. With Ã-½ in. pitch and concave bottom surface, belt can run over Ã-½ in....

Terminal Blocks use spring pressure connection technology.

TOPJOBÃ-®S DIN rail-mounted terminal blocks utilize CAGE CLAMPÃ-®S, which allow solid wire, tin-bonded wire, or ferruled stranded wire to be connected by inserting into clamping mechanism or connected via screwdriver. Series can terminate 28-4 AWG and is rated at 600 V and 87 A. Two, three, and four conductor feed-through or grounding terminal blocks feature flame-resistant polyamide 6.6...

Transformer monitors low-frequency currents.

Low-profile Model ACST-260 Current Sense Transformer monitors up to 30 A at frequencies up to 200 Hz. It provides turns ratio of 1:500, primary to sense, and is constructed with UL-recognized class B insulation system and meets dielectric strength of 3 KV.

Innovative Dampney Coating Systems Suit Even the Most Specialized Applications

Dampney's high performance coating systems provide protection against extreme weather, chemicals, and corrosive environments for atmospheric, immersion, and underground applications. Check out the video to learn more.