New Electrical Equipment & Systems Products

Control Switches offer silent operation.

QSA series 2- and 4-way switches are designed for products with low current demands of 1-50 mA. Both QSA2 and QSA4 switches feature actuation force of 3.5 N Ã-

Control Cables feature oil-resistant insulation.

CE-conforming, OLFLEXÃ-® 190 multi-conductor cables provide resistance to mineral oils, synthetic oils, and water-based coolant. Jacket passes stringent requirements of Oil Res I and II, plus UL Style 21098. Shielded OLFLEX 190 CY incorporates tinned copper braid for isolation from electrical interference. Cables feature working voltage of 600 V, temperature range of -40 to +90Ã-

Ethernet Switches help establish redundant ring.

Series EDS-405 includes relay output alarms and redundant dual 24 Vdc power inputs. Units provide plug-n-play Ethernet media redundancy solution that recovers Ethernet ring in less than 300 ms. Redundancy feature ensures that industrial automation and control applications will run non-stop. Series includes Model EDS-405 with five 10/100BaseT(X) ports; and Model EDS-405-MM with three...

Variable Frequency Drive Cable has UL and CSA TC approval.

OLFLEXÃ-® VFD Slim consists of reduced diameter, shielded motor supply cable for variable frequency drives. It has blended PVC jacket that is TC approved for UL and CSA standards for 600 V. Lapp Surge Guard semi-conductive insulation holds up to non-linear power distortions by smoothing out stranded copper; dispersing increases in voltage caused by wave reflections, harmonics, and spikes; and...

Expanding Access: How to Get At-Home Medical Tests to Market and Patients

This e-book discusses how to get at-home medical tests to market and patients.

Stepping Motor/Driver Packages have harmonic gearheads.

AlphaStep Series stepping motor and driver packages with built-in feedback devices are available with harmonic (HG) gearhead. Delivering zero-backlash performance, HG gearhead enables 1.65 in.Ã-² and 1.1 in.Ã-² motor models to produce max holding torque from 22-35 and 13-17 lb-in., respectively. AlphaStep Series uses microstep control and built-in feedback device that constantly monitors...

Inverter Power Supplies provide portability.

Thermal ArcÃ-® Next Generation Power Supplies are stackable units that range in weight from 19-63 lb. They include control panel covers to protect against elements, voltage reduction safety for STICK welding, and full digital controls. Units are suited for STICK, DC TIG, AC/DC TIG, and MIG applications.

Integrated Circuit acts as programmable logic controller.

PLC on a Chip(TM) is programmed by EZ LADDER PC-based software. Single-chip design can be embedded into OEM products to allow for ladder diagram and function block programming. It also provides control over I/O, counting, and serial communications. Development kits are available that include library of pre-designed, drop-on circuitry for I/O, power supply, and other supporting components.

Safety Interlock Switch features narrow metal housing.

Model TL4024, with guard door locking, provides locking force of 337 lb and uses 4 contacts to monitor safety, door position, and lock status. When used with stainless steel actuator, it delivers minimum of 1 million actuations. NEMA 6 anodized die-cast metal housing allows switch to withstand washdown environments, and rotatable head provides 8 actuator entry points. Narrow profile facilitates...

Modular UPS Devices suit high-density IT applications.

Offered in 2,200 and 3,200 VA power ranges, Pulsar EX RT models provide digital quality power protection. They incorporate true online, double-conversion UPS topology with built-in automatic bypass. Units include USB and serial ports for communications and power management. Powershare technology enables user to remotely reboot systems and turn off less critical equipment for load shedding. UPS...

Right Angle Gear Motors run at 1,800 rpm.

Hollow Shaft Gear Motors can be base, end, side flange, shaft, or pilot mounted. Shaft options include Ã-¾ in. hollow, along with double and single extension Ã-¾, 5/8, and Ã-½ in. diameter shafts with keys. Three AC motor options and 4 DC motor options span horsepower range from 1/8 to Ã-¼ hp with gear ratios from 5:1-60:1. Gear motors are all ball bearing and synthetic oil...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!