New Electrical Equipment & Systems Products

Heater Control Banks operate multiple heating zones.

HBC-EZ series features pre-installed controller wiring harness for single-phase, 3-phase/2-pole, or 3-phase/3-pole applications. Relays offer zero cross-switching, max output of 6 A/pole at 40Ã-

Push Button Controller comes in 2 x 3 mm DFN package.

Equipped with processor interrupt logic and adjustable on/off timers, 8-pin LTC2950 delivers enable control for dc/dc converters. It is supplied in 2 versions, each of which operate over 2.7-26 V input, to accommodate positive or negative enable polarities. Suited for portable instruments and handheld products, controller has 6 Ã-µA supply current and withstands Ã-

RS-232 Transceivers support data rates to 1 Mbps.

Designed to operate over input supply range of 1.8-5.5 V, single and dual RS-232 transceiver models LTC2801/2/3/4 ICs integrate boost converter and provide Ã-

Storage Server Solution offers 4.2 Tb capacity.

TotalStorageÃ-® 2104 Expandable Storage Plus (Exp Plus) 320 is available with 300 Gb and 146 Gb, hot-swappable, Ultra320 SCSI disk drives that operate at 10,000 and 15,000 rpm respectively. Multi-server DS4 model is designed to be rack-mounted, while single-server TS4 is stand-alone tower. Both come with choice of redundant power source or cooling fan. They fit up to 14 drives per enclosure...

How to Select a Rubber Compounding & Mixing Supplier

To learn more about rubber compounding and mixing, and how experienced manufacturers like AirBoss can meet your needs, download this whitepaper now.

DC/DC Converter produces 3.3 V @ 1.4 A from 7-36 V input.

Supplied in 8-lead MSOP package, LT1936 current mode PWM step-down DC/DC converter has internal 1.9 A power switch, 3.6-36 V input range, and adjustable output down to 1.20 V. Soft-start eliminates input current surge during start-up, and 500 kHz operating frequency allows use of ceramic capacitors. Operating at efficiencies to 88%, converter integrates cycle-by-cycle current limit, which...

In-Circuit Emulator performs debugging and programming.

Modular ST7MDT25-DVP3 provides start-to-finish development support, including real-time emulation, debugging, and in-circuit programming, for automotive and industrial applications based on ST72561 microcontroller family. Design is based on common main emulation board that provides communication and interface capabilities coupled with target emulation board dedicated to single family of ST7...

Modular Redundant Switch helps supervise Ethernet network.

EtherDevice(TM) Switch EDS-726 accepts up to 2 Gigabit ports and 24 fast Ethernet ports from selection of three 1-port Gigabit modules and eight 4-port Fast Ethernet modules, both with copper or fiber optic connectors. Gigabit managed switch features 60Ã-

Split Platen Bushings facilitate worn part replacement.

Made of 660 bronze, Split Movable Platen Bushings enable replacement of machine's platen bushings without requiring removal of tie bonds. This helps prevent machine problems cause by worn platen bushings, such as sagging, lubrication problems, clamp ram packing leaking, and platens out of parallelism. Included weld rings come drilled, tapped, and assembled.

Low-Profile Inverter powers large CCFL-backlit LCDs.

Series DmF6 DC-AC Inverters measure 9 mm high and power CCFL-backlit LCDs in 19-24 in. diagonal size range. Inverters power 6 CCF lamps with combined power up to 60 W, providing starting voltage up to 2,400 V with flicker-free brightness control from 0-100%. Inverter also features transformers and connectors for direct connection to display on board measuring 9.52 x 2.83 in. Six mounting holes...

Power Supply Transformers have optimized core configurations.

Transformers utilize core materials and configurations optimized for specific applications. Featuring elliptical cores, multiple output transformers SRW2420EG and SRW2425EG measure 30 x 28 x 25 mm and 30 x 28 x 30 mm, produce 25 and 30 W output, and feature 25 and 35 kHz flyback operating frequency, respectively. Of the same type, low-profile SRW33EX measures 36 x 42 x 23 mm and features 65 V...

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.