New Electrical Equipment & Systems Products

DC Power Supplies provide 16 outputs.

With input power of 115 Vac, 2U rack mount Models R615DC416UL, R615DC616UL, R615DC416ULCB, and R615DC616ULCB feature adjustable 6-15 Vdc output range that is filtered and electronically regulated, making them suited for CCTV cameras and accessories. All units include short circuit/thermal overload protection, master power switch with built-in circuit breaker, individual power LEDs, and removable...

Rack-Mount Power Supplies have isolated 24 Vac outputs.

Featuring UL2044/CUL certification, 2U rack - EIA 19 in. models R248ULI, R248ULCBI, R2416ULI, and R2416ULCBI incorporate master power switch with built-in circuit breaker, individual power LEDs, and removable terminal blocks with locking screw flanges. First 2 models offer 8 fuse-protected outputs and total supply current of 12.5 A (300 VA), while latter 2 models offer 16 Class 2 rated PTC...

Isolated Power Supplies offer 8 or 16 outputs.

With 115 Vac input power, Series ALTV248UL AC Wall-Mount Power Supplies deliver 24 Vac output and either 12.5 or 25 A total supply current. All units are UL2044/CUL listed and include master power switch with built-in circuit breaker as well as electronically isolated outputs. Output protection is provided by fuse or Class 2 Rated PTC, depending on model.

Micropower DC/DC Controller has No RSENSE(TM) architecture.

Constant frequency, current mode, step-down controller model LTC3772 operates from 2.75-9.8 V input and delivers up to 5 A of output current to voltages as low as 0.8 V. Without requiring current sense resistor, product automatically switches into Burst ModeÃ-® operation at light loads. It consumes 40 Ã-µA quiescent current under no-load condition and features undervoltage lockout, 550...

Rack System Design & Buyer's Guide

There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.

RF Connectors have space-saving design.

Used to verify antenna and circuit performance, MINI RF series measures 2.7 x 2.7 x 1.6 mm, supports signal frequencies up to 6 GHz, and incorporates 3Ã-

Cable Harnesses suit automation and robotic equipment.

Custom Cable Harnesses are manufactured to specification with regard to flexibility and cycling, exposure to chemicals and harsh environments, signal and power requirements, and connector types. Featuring 100% electrical and mechanical testing, units are UL/CSA approved and can be fabricated from 4-30 ga wire with virtually any type of positive locking connector and quick-disconnect. Harnesses...

Differential Pair Arrays provide up to 1 terabit/connector.

Series DPAM/DPAF offers up to 168 usable signal pairs, which are on staggered layout with perimeter grounds to simplify signal routing on boards. Connector set has .394 in. mated height and features solder crimped to tails for processing. Final InchÃ-® data is available for 168 signal pairs. Other standard sizes include 48 and 104 signal pairs.

Switched Receptacle suits hazardous locations.

Factory-sealed, dead-front interlocked, Model MD2SR is listed by NEC for use in Class I and Class II hazardous locations. It includes positive polarization, defeatable door interlock, and dual-color operating handle that indicates when switch is energized. Waterproof, corrosion-resistant unit has copper-free aluminum enclosure with epoxy powder coating. Fused and non-fused designs offer...

Linear Power Supply features dual outputs.

PCB-mount 22-100, housed in 3 x 2 x 1 in. plastic case and potted with epoxy compound, features Ã-

Connectors are offered in mountable version.

Designed for use in troughs, wire ways, or panels, NIMBUSÃ-® mountable connectors feature dual-sided configuration and are available in up to 12 ports with wire range of 750MCM-6. Products, dual rated for copper or aluminum conductor, are UL-Listed through 500MCM and feature removable plugs for entry port closure.

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.