Navigation Displays include high-speed networking.
Multifunction E-Series combines 100-Megabit networking and video integration with chartplotter, radar, and digital fishfinder technologies. Available as 8.4 in. Model E-80 and 12.1 in. Model E-120, each is equipped with ultra bright, sunlight viewable TFT LCD display for visibility in all lighting conditions, including tropical sun. Both also include 4 video inputs for connection to on-board...
Read More »
Sensors and Controllers are configurable for gas monitoring.
Z Gard(TM) S Sensor detects presence of CO or NO2 in air. Sensors are available with 2 output versions, 4-20 mA analog output or addressable RS485 digital signal. Z Gard C Controllers are microprocessor based and interface with up to 40 remote sensors via RS485 serial communication ports. Z Gard COmbo Gas Monitor is available in 2 versions, either employing metal oxide solid-state sensor or...
Read More »X-Ray Inspection Solution is adaptable and expandable.
Concept FX modular X-ray inspection system offers x-ray source options of 80, 90, and 130 kV tubes. Six 2-6 axes sample manipulation options include X/Y, tilt, rotate, tube-Z, and detector-Z motion control, while image processor options are VIP, VIP-Plus, and XAIP. Configurable as manual or semi-automatic inspection solution, applications include failure analysis, semiconductor inspection, and...
Read More »Vibration Meter suits condition based monitoring programs.
Model PVM 100 portable hand-held meter measures equipment vibration in terms of acceleration, velocity, or displacement. Standard accessories include 784A accelerometer, 6 ft cable, PT2 probe tip, B3 magnetic mount, and SF6 mounting stud. Cable connects accelerometer to input BNC connector. Attach the probe tip, magnet mount, or mounting stud to achieve range from 10 Hz to 5 kHz. Unit comes with...
Read More »
Axial Flow Check Valves for Pumps and Compressors
DFT® Inc. has provided a range of valve solutions for customers struggling with pump and compressor problems.
Read More »
Software provides dedicated WLAN test suite.
Providing testing capabilities specifically for WLAN systems, Lyocom Test Suite incorporates tools for generating and analyzing WLAN signals. It supports all 802.11a/g OFDM as well as 802.11b/g DSSS and 802.11b/g CCK modulations. Featuring multiple GUIs, software includes 4 LabVIEW tool sets to facilitate automated testing.
Read More »
System calibrates portable gas detectors.
Galaxy Test System enables automated recordkeeping and calibration. After setup, users place instrument in test stand and Galaxy automatically performs test. System is stand-alone, requiring no computer, controller, or network interface. Other features include wireless or wired network interface, instrument charging, memory card, test receipt printer, and in-line gas cylinder holder. Replaceable...
Read More »Gyro Electronic Compass suits autopilot applications.
Solid-state Model SSC200 is factory calibrated to deliver precise heading information 10 times/sec and vessel attitude readings, including pitch and roll once per sec. It provides better than 1Ã-
Read More »
Pressure Gauge incorporates microprocessor electronics.
Model 1205 panel-mounted pressure gauge combines solid-state pressure sensing with microprocessor electronics to provide digital readout. Unit offers 4-digit LCD display, digital zeroing feature, continuous or peak and hold display, and 200% overpressure protection. Standard unit comes with Ã-¼-18 NPT pressure port, and operates on 110 or 220 Vac or with external 12 Vdc power. Private label...
Read More »
Mobile, PC-Based PID Meter measures TVOCs and air quality.
DirectSense TVOC measures Total Volatile Organic Compounds (TVOCs) as well as other Indoor Air Quality parameters. Monitoring kit comes with 10.6 eV PID sensor for ppb or ppm concentration range measurement of TVOCs as well as sensors for relative humidity and temperature. Users can also mix or match up to 3 electrochemical gas sensors and add their own sensor tips. Desktop PC software is...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
