Current Feedback Op Amps suit video applications.
Supplied in SO-14 packages, PS13000 Series comprises quad-configuration devices with 4 identical amplifiers on single chip. Model PS13004 features small-signal bandwidth of 280 MHz and slew rate of 1,100 V/Ã-µs with ability to drive 65 mA outputs while requiring 3.3 mA of static supply current. Optimized for higher bandwidth of 450 MHz and 1,500 V/Ã-µs slew rate, Model PS13014 drives 65...
Read More »
Rack-Mount DC-DC Power Supply suits rugged vehicle applications.
Model TVR3001, 3,000 W DC-DC power conversion rack features 3 modules, each with two F501 full brick DC-DC converters, coupled with 2-phase boost converter, to provide standalone power solution. Modules plug into 19 in., 2U rack which can be used in 19 in. cabinet of various heights. Operating in temperatures from -25 to +60Ã-ºC, product offers step-up or step-down power conversion and has...
Read More »Programmable Metrology MCUs serve analog front end solutions.
Comprised of single-phase metrology devices supported with multiple communication interfaces, MSP430AFE2xx series enables system partitioning in metering applications to allow flexible, stand-alone measurement. Products are based on 16-bit RISC architecture with 12 MHz system frequency and achieve less than 0.1% error in energy accuracy over dynamic range of 2400:1. This is enabled by 3...
Read More »
Electric Vehicle Chargers suit residential/light commercial use.
Level 1 15 A/120 V chargers are portable units that can be used during road travel and plug into 15 or 20 A receptacle. Hard-wired to 20 A circuit, Level 2 20 A/240 V chargers provide full charge to vehicles in 3-6 hr. Both electric vehicle chargers are weatherproof-rated and have built-in ground fault protection. Units are designed for residential and light commercial applications and are...
Read More »
Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!
This white paper outlines the different types of screw head and drive designs.
Read More »Rohde & Schwarz to Provide Key Equipment for Five More ATSC Mobile DTV Transmission Systems for ION Media Networks
Columbia, MD, March 25 2011 - Rohde & Schwarz announced that it is supplying the ATSC Mobile DTV equipment for five more ION stations, for both existing Rohde & Schwarz transmitters as well as from other manufacturers. With this new push into MDTV coverage, there are now 10 Mobile DTV systems being deployed by ION Media Networks that are powered by the R&S AEM100 emission multiplexer and the R&S...
Read More »
Dimminutor-® Channel Disintegrator
The Dimminutor-® Turbo model provides effective, automatic screening and grinding of wastewater solids in straight through channels and wet wells. This powerful unit reduces plastics, wood, rags and other solids to fine bits, enhancing plant operation and improving the reliability of pumps and other downstream equipment. The Dimminutor employs a smooth, continuously rotating design with high...
Read More »austriamicrosystems Releases 0.18-µm High-Voltage CMOS Process for Volume Production
Industry-benchmark High-Voltage CMOS technology offers industry-first RF (Radio Frequency) integration and high density SoC (System on a Chip) capability Unterpremstaetten, Austria - austriamicrosystems (SIX: AMS) today announced the conditional release for volume production of its advanced 0.18Ã-µm High-Voltage CMOS process technology H18 which will be manufactured in IBM's 200mm Burlington...
Read More »
N-Channel MOSFET Gate Driver operates from -55 to +125-
Supplied in thermally enhanced 10-lead MSOP, MP-grade LTC4441 delivers 6 A peak output current and increases DC/DC controller output power and efficiency. This enables driving of high-power N-channel MOSFETs or multiple MOSFETs in parallel. Along with adjustable 5-8 V onboard linear regulator for gate drive voltage and IC power, features include 5-25 V input supply, adjustable leading edge...
Read More »
Medical and ITE Power Adapters offer 135 W continuous output.
Fanless TMP135 series of medical power adapters are approved to UL 60601-1, EN 60601-1 3rd edition medical standards, and ITE adapters to UL 60950-1, EN 60950-1 2nd edition ITE standards. Peak power for 10 sec is up to 270 W, leakage current is less than 200 Ã-µA, and efficiency is up to 91%. Operating at full load over temperature range of 0-40Ã-
Read More »
Fieldbus-Based Power Supply suits explosive hazardous locations.
Dynamic Arc Recognition and Termination System (DART) is power supply and control system for fieldbus installations in intrinsic safety environments. Feeding power of 8-50 W, product detects change in current resulting from electrical fault where explosive spark is possible and immediately switches off power. Power is shut off in microseconds, robbing spark of energy needed to ignite hazardous...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
