New Electrical Equipment & Systems Products

Label Holder solves problems in wash down areas.

Model B30 Bottom Load Label Holder eliminates saturation and bleeding of labels caused by washdown solutions entering through open top of top-load label holders. One-piece, sealed-at-the-top design shields labels from water, cleaning fluids, and dirt. Soft, integral bead under clear front window provides added grip to hold labels in place. Bottom opening allows promotional signage to hang below...

Pressure Switch offers 4-20 mA output signal.

N-Series electronic indicating pressure switch provides pressure indication and switch functions. Users observe values on Ã-½ in. LED display and can toggle between process pressure, setpoint, and reset point. Unit utilizes K Series thin film pressure sensor and circuit board housed in NEMA 4X/IP 66 rated, epoxy-coated, aluminum enclosure. Setpoints with adjustable deadband are available for...

Seismic Cabinets protect vital networking equipment.

Cabinets protect LAN/WAN, voice/data equipment, and servers through zone 4 seismic activity. Able to safeguard 1,000 lb of installed equipment and 100 lb top cable weight, 7 ft cabinet models accommodate 19 in. equipment. Built to EIA 310-D standards, units are equipped with flush-mounted hinged front and rear doors featuring flush 3-point keylock handles, lockable/removable side panels, top...

Relays enhance machine monitoring.

MachineAlert(TM) function protection relays include phase monitors, current monitors, thermistor monitors, and motor rotation monitors. Microprocessor technology combined with solid-state circuitry provides repeatable operation. LCD keypad programming takes guesswork out of device set up. Motor control enhancing functions of relays protect equipment and monitor applications to help reduce...

Pressure Sensor Selection Guide

This white paper provides information and a guideline for pressure sensor selection.

Camera-Microscope Adapter provides instant digital photos.

Digi-Mic Adapter allows user to attach any Digital Camera with lens filter thread to conventional or stereo microscope. Adapter's Field Of View fills entire camera chip in horizontal direction. Model DMA-1 is made specifically for Nikon Cool-Pix cameras with 28 mm filter thread. Model DMA-2 has 37 mm male lens thread that fits Sony Digital Cameras. It can be attached to other digital cameras by...

Bus Station suits DeviceNet(TM) and PROFIBUS-®-DP networks.

AIM ST Module, busstopÃ-®, mounts directly on motor control enclosures to provide I/O, power, and network signals to inside and outside enclosure. Product offers up to 8 dry contactor inputs and outputs. From outside enclosure, signals are accessed via 5-Pin eurofastÃ-® or 4-Pin and 5-Pin minifastÃ-® connectors. Rear screw terminals provide clean way to get power and DeviceNet(TM)...

Miniature Safety Interlock Switch measures 75 x 25 x 29 mm.

Suited for limited space applications, Series T2007 provides conduit entry and 2 sets of contacts: 2 N/C or 1 N/C and 1 N/O. Head rotates 360Ã-

Fiberglass Enclosures suit corrosive environments.

Series HJ features overlapping shoebox cover with integral mounting foot for easy pole mounting. Flat and raised cover designs are available. Each has foam-in-place gasket with continuous seal to keep out dust, dirt, and liquids. Hot molded, fiberglass reinforced, polyester enclosures are UL Type 4X rated and can be modified to meet variety of specifications. Applications include petrochemical...

Power Relay provides 20 million operations.

Series FTR-MY occupies 100 mmÃ-² of PCB area. Dielectric between coil and contacts is 3,000 Vac and surge strength voltage is 5,080 V. Coils feature 110 mW sensitivity and 54 mW operating power. Bifurcated, gold overlaid, silver alloy contacts have contact rating of 250 Vac/30 Vdc at 5 A, and 5 A max switching current. Relay comes in 1 Form A and is available for 4.5 to 24 Vdc operation with...

Cam Switches save space on control panels.

Series 20 instrument and control switches can be mounted on 3 in. centers and can be built up to 12 decks and up to 12 positions. Switching action is controlled by shape of cams, allowing nearly infinite number of combinations using standard parts. All models feature double-break, silver-plated contacts enclosed in thermoset plastic housing. Standard and Lighted models offer continuous rating of...

More performance and functionality for Sinumerik 828D CNC

Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.