New Electrical Equipment & Systems Products

Buck-Boost DC/DC Converter delivers up to 1 A.

Model LTC3441 synchronous, fixed frequency converter offers efficiencies up to 95%, optimizing battery run time for battery-powered applications. It operates from input voltage of 2.4-5.5 V and can provide up to 1 A at fixed output voltage between 2.4-5.25 V. Buck-Boost topology allows unit to operate above, below, and equal to output voltage with single inductor. Operating frequency is set...

Power Rocker Switches enhance design aesthetics.

Designed for snap-in installation, CG and CL series panel-mount switches can be supplied with 2-tone actuator or can be illuminated with white, red, amber, or green actuators. Actuators may also be marked. With contact ratings of 16 A @ 125 Vac or 10 A at 250 Vac, both series have UL and CSA approvals. With positive detent, CG series also has VDE approval. Electrical life is rated at 10,000 make...

Current-Sensing Transformers have lead-free construction.

Available with turn ratios of 30, 40, 50, 70, and 125, LPE-3325-CST series surface-mount, current-sensing transformers provide optimal performance at frequencies of 100 kHz and greater. It features secondary inductance range of 180-3,000 Ã-µH at 100 kHz and 0.1 V and maximum secondary resistance range of 1.00-7.70 ohms. All 5 configurations are rated for 6 A. Transformers measure 0.265 x...

Junction Boxes are pre-fabricated and ready for installation.

Pre-Fabricated 4 in. sq Boxes include Uni-Mount(TM) cover, ground screw, and 8 in. insulated copper ground lead. They are 1 1/2 or 2 1/8 in. deep with 1/2, 5/8, or 3/4 in. single or 2-device raised cover. Guide tabs and stud alignment holes insure consistent alignment and mounting height for easy installation. UL-listed boxes replace old mounting methods in 2-12 in. metal, 2Ã-½-12 in. wood,...

Guide to Switches for Your Application

Download this e-book to learn about the different types of switches available for pneumatic and hydraulic devices.

Battery Pack powers portable CMMs.

Custom Nickel Metal Hydride battery provides 12 V output and includes short circuit protection for CMM arm. With life expectancy of 800-1000 charge-discharge cycles, unit powers CMM arm for 6-8 hrs under normal conditions. Product has one green and one red light that indicate level of charge. Red LED illuminates and stays lit once battery falls below minimum charge level. Physical dimensions are...

Step Motors offer holding torques from 45-83 oz-in.

Super Torque Size 17 (1.66 in.Ã-²) hybrid step motor family is offered with 3 axial lengths. Shorter, 1.8Ã-

Brushless DC Servomotor achieves speeds to 10,000 rpm.

NEMA size 23 BLDCmotor(TM), available in 3 stack lengths, is compatible with all 3-phase brushless DC amplifiers. It achieves speeds to 10,000 rpm with continuous torque rated up to 53 oz-in. and power output up to 150 W. Winding options include rated voltages from 12-160 Vdc. Features include permanently lubricated ball bearings, totally enclosed motor housing, and dynamically balanced rotors.

Junction Box includes intrinsic safety barrier.

FieldBarrier(TM) field-mountable, 4-channel device interfaces with 16 intrinsically safe field instruments. Each channel supplies 40 mA of current to field devices while spurs can be as long as 394 ft. FieldBarrier provides true distributed architecture for hazardous area applications. It features short circuit and overload protection, galvanic isolation, and extreme environment operation in...

Terminal Strip and Boot meet OEM specifications.

Able to replace Ford OEM 2nd generation DIS terminal connection system, DT1000/CB66E Assembly incorporates one terminal strip and boot. After installation to vehicle, coil pack interface assembly mirrors appearance and function of original parts. Terminal strip is supplied on reels and can be terminated using proprietary applicators, and CB66BE boot can be applied using the bender/booter.

Thread Connectors are available in 26- and 28-pin.

Able to be used to route power and signals to factory automation equipment, M27 cordsets and receptacles are rated for 150 V and 8.0 A and handle up to 18 AWG wires. Cordsets, available with PVC or PUR cable jackets, are offered in male or female versions in standard or custom lengths with pigtail or extension cords. Encapsulated mating receptacles have pre-soldered leads, and connectors provide...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.