Wire-Protection Grommets are custom cut.
Grommets are available in bulk packaging of factory pre-cut lengths, reducing waste and saving time of manual cut-off. Kits are suited for use on assembly lines to reduce scrap and increase throughput. They may also be shipped with products for customer end-use installation. All kit envelopes are printed to customer specifications.
Read More »Data Links provide signal integrity from 60-200 mm spacing.
Series HFHM2-DP is offered with socket and terminal strip interfaces on 0.5 mm pitch, and Series HFEM-SE, HFEM-DP and HFEM2-DP have 0.8 mm pitch for high speed board-to-board connections. Typical performance for the 0.5 mm pitch system is 6 Gb/sec/pair with 20 signal pairs per bank for 5 in. length. For 0.8 mm pitch system, typical performance is 4 Gb/sec/signal line for 5 in. length and 2.5...
Read More »RJ45 Connectors target Ethernet and PoE applications.
MaxJack single-port connector, with straight design and integrated magnetic filter components, is configured for IEEE 802.3-compliant applications. Return loss is specified at -3 dB over frequency range from 1-125 MHz, making it possible to extend port distances beyond 100 m limit. Fully shielded MaxJack connectors are available in ganged and stacked configurations, with Ethernet data rates of...
Read More »Three-Phase Solid State Relays have integral heat sink.
Offered in 2 housing styles, RJ Series Solitrons can switch 2 or 3 phases and feature LED indication of control input and optional over-temperature protection. They can be snapped onto DIN-rail or mounted to back chassis. Able to switch up to 32 A @ 600 Vac, products utilize direct copper bonding technology and have cage clamp terminals. They can replace electromechanical or mercury contactors in...
Read More »UNLOCKING THE HIDDEN POTENTIAL OF MANUFACTURING: How lubricants can help increase productivity and reduce total cost of ownership
This paper illustrates how manufacturing companies have successfully worked with Shell Lubricants to upgrade their lubrication and extract value by reducing TCO and improving equipment productivity.
Read More »Microprocessor Power Manager comes in 4 x 4 mm QFN package.
With 2.5-5.5 V input voltage range, LTC3445 xScale microprocessor power supply integrates monolithic synchronous current mode buck regulator that delivers up to 600 mA of output current. User selects constant 1.5 MHz or spread spectrum switching frequency. Onboard I2C interface controls 6-bit programmable dynamically adjustable output voltage range of 0.85-1.55 V and slew rate. Product also...
Read More »Power Generator is suited for use in forklifts.
Model E7 AFC Generator is built with two 900 W POWERSTACK MC250 alkaline fuel cell stacks, which give unit 1.8 kW nominal power rating with ability for max power output to reach 2.15 kW. Ability to overload generator by 20% provides power for peak loads during acceleration and hill climbing, and fuel cells keep voltage supply at constant level. Silent-running, emission-free generator replaces...
Read More »Electrical Enclosures feature thermal insulation panels.
Series 5412 ESTH thermally insulated electrical enclosures are available in sizes ranging from 12 x 12 x 6 in. to 72 x 30 x 24 in. NEMA 4/12 enclosures feature poured-in-place gaskets, quarter-turn locks, and incorporated drip shields. Held in place by steel brackets, Ã-¾ in. aluminum foil faced insulation panels are installed on all faces, including door. Rigid polyisocyanurate foam...
Read More »Lightning Protector has multi-strike capability.
Providing protection from lightning and static discharge where dc voltage is required, GX Series Bias-T Protectors have weatherized housing and are available with N, 7/16 DINTNC, and SMA standard connectors. Series covers 400-1,200 MHz (CGX protector) and 800-2,500 MHz (DGX protector) frequency ranges and has surge capabilities of 8/20 Ã-µs @ 20 kA and 10/350 Ã-µs @ 10 kA. Return loss is...
Read More »Half-Brick DC/DC Converters have 91% conversion efficiency.
Available in 0.4 or 0.5 in., low-profile packaging, RFB300/350 series deliver up to 350 W continuously without derating across baseplate temperature range of -40 to +100Ã-
Read More »Safety Switch suits SIL1, SIL2, and SIL3 installations.
IntelliPoint SXRNT Series RF Admittance Point Level Switch offers Auto-Calibration feature that detects presence or absence of material for maintenance-free operation. In-line unit measures liquids, solids, and slurry materials as well as interface between any insulating and conductive liquid. Included software monitors changes in composition, dielectric, or conductivity and maintains repeatable...
Read More »Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »