Electrical Equipment & Systems

Gas Turbine suits industrial applications in 6 MW range.

Gas Turbine suits industrial applications in 6 MW range.

Cold-end-drive, single-shaft Taurus(TM) 65 generator suits cogeneration, combined cycle, and other power generation applications. Generator set is rated at 6000 kWe for continuous duty at ISO conditions. It features 13-stage axial compressor with 15:1 pressure ratio that produces air inlet flow of 19.4 kg/sec, and utilizes 3-stage turbine with shrouded stage-3 turbine blade. SoLoNO(TM) combustion...

Read More »
Integrated PoE Solution has 4 independent ports.

Integrated PoE Solution has 4 independent ports.

Model TPS2384 manages discovery, classification, and delivery of dc power source equipment to powered device. It enables seamless sharing of power and data over same Ethernet cable and simplifies design of IEEE 802.3af-compliant power source equipment. Supporting operation at -40 to +125Â-ºC, power management IC offers 3 modes of operation: automatic, port-management, or manual. It detects...

Read More »
Switches are compatible with lead-free solder process.

Switches are compatible with lead-free solder process.

Lead-Free Switches such as trackball navigation switch, and KMR, KMS, TPC, TPA, and KSU tact switches contain no cadmium, mercury, or other toxic substances, such as hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers. With height of 6 mm, Elum(TM) illuminated pushbutton switches feature right angle actuator with integral LED, facilitating design of front panels for...

Read More »

Ultraminiature Connectors suit limited space applications.

Series SMCX connectors configure minimal board-to-board height of 4.35 mm (BI) to 2.50 mm (BII). Surface mount units deliver VSWR less than 1.2 and IR loss of -0.25 dB. They are suited for applications operating up to 6 GHz, such as UMTS/CDMA, 802.11 wireless/PCS devices, semiconductors, smartphones, and M2M applications, and can be delivered in tray/reel packaging.

Read More »
Conduit/Tubing is flame-retardant and IP-66/68 rated.

Conduit/Tubing is flame-retardant and IP-66/68 rated.

Available in sizes from Â-¼-2 in. diameter, FPAS Corrugated Nylon Conduit and Tubing offers flexible wire protection. Smooth interior ensures free movement of all wires completely through. Damage-resistant, corrugated exterior allows tubing to withstand abrasions and lubricating fluids while it fits around tight bends and corners without deformation or fatigue. Suited for all environments,...

Read More »
AC/DC Front-End Power Supply produces 13 W/in.-³.

AC/DC Front-End Power Supply produces 13 W/in.-³.

Suited for equipment with distributed power architecture, DPS2000 adheres to SSI guidelines. Rated at 2,000 W, 48 V unit features active current sharing, hot-swap capabilities, N+1 redundancy, and I2C interface. Power-factor corrected unit meets EMI Class B regulations, measures 12.80 x 2.74 x 4.86 in., and is upgradeable via flash memory. With full load efficiency of 87%, it delivers 1,000 W at...

Read More »
Connector enables data transfer between portables.

Connector enables data transfer between portables.

USB Mini B connector allows portable devices to communicate and share data without requiring PC connection. Suited for USB On-the-Go devices within USB 2.0 market, product features surface mount contacts, full shielding, and arched lead-in. It meets needs of consumer, portable, and wireless electronics markets.

Read More »
Trailer Harness prevents electrical system corrosion.

Trailer Harness prevents electrical system corrosion.

STA-DRYÂ-® Slim-7(TM) provides users with molded, 7-way connection suited for any heavy-duty trailer. Molded connectors between modules have ribs and o-rings that keep moisture and contaminants from penetrating electrical system. Integral design enables harness to be threaded through trailer configurations with tight areas, eliminating potential for unintentional disconnect.

Read More »

Cover Strip protects linear guides from contamination.

Made from stainless steel, BAC Cover Strip for MONORAIL BM provides alternative to plastic caps that cover counterbored mounting holes in profile rail of linear guideway assembly. Measuring .5 mm thick, strip is placed on top of rail and snapped into full-length groove along where holes are drilled. Since width of cover strip is narrower than width of guide rail, exposed surface on top of rail...

Read More »

All Topics