SMB Interconnect suits board-to-board applications.
Eliminator(TM) Series SMB right-angle interface allows direct connection to PCB without additional cables or connectors. Available in 50 and 75 Ω impedance, unit provides broadband performance with reflection from dc through 4 GHz. It is made from precision-machined brass with TFE insulators and gold-plated contacts. Connector features insulation resistance of 1,000 mΩ min, dielectric withstand...
Read More »
Connectors suit high voltage applications.
Designed for cables with jacket OD from 0.73-Ã-½ in., LC and LT Connectors can also be adapted to smaller diameter cables. Units are rated to 5,000 V standard, and up to 10,000 V with specific cable preparations. Operational range is DC to 1 GHz. Specified to MIL-PRF-39012 or MIL-C-3650 standards, both connectors maintain 50 ohm impedance, but are not interchangeable.
Read More »Switches are rated for throughput up to 4 Gbps.
TotalStorageÃ-® SAN16M-2 and SAN32M-2 offer integrated support for Full-Fabric and FC-AL tape attachment. Offered in half-rack width configuration, SAN16M-2 addresses entry-level and midrange SAN applications by providing 8, 12, or 16 nonblocking ports. TotalStorage SAN32M-2, offered in 1U rack-mount chassis, addresses midrange to enterprise SAN applications with 16, 24, or 32 nonblocking...
Read More »
Miniature Pushbuttons are available in 3,136 variations.
Series 48 pushbutton switches, sealed to IP67, are available with options such as electro-mechanical or solid-state (Hall effect) switching and momentary or maintained action. Products are offered with square or round bezels, 7 button colors, and PC or solder tab terminals. Switches can be non-lighted or illuminated with 6 LED color choices, and mounting options include bushing or snap-in styles.
Read More »
Key Considerations When Choosing a Power Cord
This white paper provides an overview of key considerations when choosing a power cord.
Read More »
Connector protects cable from repetitive movement.
TUFF-FLEX Cord Grip Connector has tapered, molded rubber cone that matches cable arc-of-bend specifications to eliminate damage to cable insulation at connection stress points. Rubber cone-to-connector seal is moistureproof, and 100% rubber construction resists hard knocks, splitting, and cracking. Available in straight, 45Ã-
Read More »
Fibre Channel Switch suits small to midrange SANs.
Featuring 1U form factor, scalable TotalStorageÃ-® SAN16B-2 Express offers 4 Gbps port-to-port throughput with auto-sensing for connecting to existing 1, 2, and future 4 Gbps host servers, storage, and switches. Unit offers up to 16 non-blocking ports with full duplex throughput at 1, 2, or 4 Gbps link speeds. It includes eight 4 Gbps shortwave transceivers, automatic path routing,...
Read More »
Server provides 256-port fabric switch functionality.
TotalStorageÃ-® SAN256B Director offers 4 Gbps Fiber-Channel switch capability as well as 1, 2, and 4 Gbps auto-sensing. It includes minimum of 2 control processors, dual power supplies, and fans in 14U rack height. Base model include Inter Switch Link Trunking, Advanced Zoning, Web Tools, Fabric Watch, Performance Monitor, and Hot Code Activation. TotalStorageÃ-® SAN256B offers forward...
Read More »Fabric Switch offers FICON with CUP capability.
TotalStorage SAN32B-2 supports Fibre Channel connectivity for servers and storage. FICON with CUP activation allows in-band management of supported SAN b-type switch and director products by System Automation, for OS/390 or z/OS from IBM 9672 Parallel Enterprise G5 and G6 servers, and IBM zSeriesÃ-® 900 and 990 servers.
Read More »
Fibre Channel Switch is designed to increase port density.
TotalStorageÃ-® SAN16B-2 SAN b-type fabric switch (2005-B16) provides 4 Gbps port-to-port throughput with auto-sensing capability for connecting to 1, 2, and 4 gigabit host servers, storage, and switches. It scales to 8, 12, or 16 nonblocking ports with full-duplex throughput on demand and has 1U form factor. Along with automatic path routing and nondisruptive firmware upgrades, unit features...
Read More »
Pin and Sleeve Devices conform to IEC 309 standards.
Watertight plugs, receptacles, connectors, inlets, and mechanical interlock devices provide safe electrical connections in commercial and light industrial environments subject to temperature extremes, vibration, impact, dirt, moisture, corrosive elements, and wash downs. Housings are flame retardant, impact-resistant and non-corrosive Valox and nylon material. Rated to 20, 30, 60, and 100 A,...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
