New Electrical Equipment & Systems Products

Banana Plug Connectors facilitate fast repairs.

QuickConnect(TM) Models CT3249 and CT3250 are standard and sheathed 4 mm DIY plugs, respectively. Both have wire conductor capability of up to 2.5 mmÃ-² and 3.9 mm for jacket diameter. When used with rated lead wire, sheathed version meets EEC 61010-031 to 600 V CAT II. Offered in 6 colors, both units contain spring-loaded clamp that securely grips both wire's conductor and outer jacket. They...

Fittings feature snap-in design.

Made of die-cast zinc, WHIPPER-SNAP(TM) Connectors feature hardened spring steel locking ring that eliminates need for locknut and installs in seconds. Double locking tabs hold connector tight in box, while additional tension tabs provide continuity and clear wire path. Push-through design eliminates snags and wire damage. WHIPPER-SNAP(TM) connectors are UL listed for grounding when installed in...

Power Supplies can be configured with output up to 8 kW.

Modular M.A.P.S. Power Supplies are available with computer-driven as well as manual switching networks that enable single supply to drive several sources. Model HTR is suited for process heating applications, while Model EVP is used for basic thermal evaporation applications. Model HTE is for high temperature evaporation, typically used with furnace style source, and Model LTE suits low...

Switching Power Supply suits datacom/telecom applications.

Providing input voltage range of 36-72 Vdc, modular AAD-130DC features choice of 4 available outputs with current ratings from 1.5-16 A. Convection-cooled version provides 80 W of output power, but optional 15 CFM cooling fan is also available, enabling device to provide 130 W of output power. Measuring 5.0 x 3.14 x 1.25 in., DC/DC unit complies with EMI filtering and surge withstand requirements...

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Thin Film Flat Chip Fuses offer current values to 5.0 A.

Featuring stability verified in accordance with UL 248-14 and IEC 60127-4, MFU 0603/0805/1206 provide secondary overcurrent protection for devices in 0.45 or 0.55 mm high packages. Terminations are pure tin on nickel plating. MFU 0603 and 0805 are rated for 0.5-4 A current range and have rated voltage of 32 V, while MFU 1206 has rated current value up to 5.0 A and voltage rating of 63 V. At rated...

Perimeter Raceway has modular design and scored base.

Designer Series 4000 steel raceway incorporates crossover feature that enables receptacles and data activations to be positioned in same channel or on downward facing surface. Featuring obstacle avoidance fittings and in-base integral channel divider, unit maintains integrity of data channel separation when cables cross over power channel. Adjust-to-fit raceway couplings allow up to 4 in. of...

Nylon Plugs and Connectors feature textured grip for safety.

Made of impact- and chemical-resistant nylon, Safety Grip 15 A Plugs and Connectors withstand punishing commercial settings. High-visibility yellow color promotes safety on job site, while slightly recessed cord-grip screws minimize screwdriver slippage. Heavy-duty plug blades and connector contacts resist heat and provide conductivity. Two-pole, 3-wire plugs and connectors are UL listed and meet...

AC-DC Power Supplies suit distributed power applications.

Housed in 4 x 7 x 1.5 in. package for 1U-high rack installation, Series NLP250 provides 12, 24, or 48 V outputs, as well as auxiliary, always-on 5 Vdc output. Employing switch-mode technology, units feature power density of 6.0 W per cu-in. Main output channel can deliver 175 W continuously under free air convection conditions, rising to 250 W with 200 lfm forced air cooling. All models have...

Circuit Breakers protect wiring, equipment, and subsystems.

Available in stud or plug-in designs, SAE Type II and Type III Circuit Breakers minimize risk of fire due to overload. They provide reusable choice to wiring protection, offering heavy-duty replacement for ATC, ATO, and mini fuses. Units are suited for trucking, construction, and agricultural vehicles, as well as RVs and marine systems.

FPGA-based Controllers provide SERCOS III interface.

Based on Spartan-3 FPGA platform of Xilinx, SERCON100 controllers for SERCOS III include hardware functions such as timing, synchronization, and processing of cyclic and non-cyclic data on basis of 2 integrated Ethernet MACs. Master and slave controllers, available for Spartan-3 FPGA with 400K system gates, are integrated in FT256 BGA housing. Also offered, SERCON100S Slave Controller is...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.