New Electrical Equipment & Systems Products

New Grades of Meldin-® Polyimide Materials

The Polymer Products Business of Saint-Gobain Performance Plastics has recently developed a grade of MeldinÃ-® materials for highly demanding applications in which metal and other materials will not perform adequately. Applications include thrust washers, sealing rings, bearings, and fork pads. The MeldinÃ-® 3100 series offers 4 tribological grades that satisfy application needs of high...

Electronic Transformers are UL 2108 compliant.

Engineered for low voltage lighting systems, Electronic Transformers provide thermal overload protection in environment where case temperature rises above 120Ã-

Fuseholder Circuit Breaker features 2 mounting options.

Series T9 single pole circuit breakers for overcurrent protection are designed for applications where inrush currents cause nuisance trips or aging of fuse element. Threaded neck version accommodates an IP 65 rated cover for protection against environmental conditions such as jetting water. Snap-in rear mount version supports panel thicknesses ranging from 0.5-3.0 mm. Both models UL standard 1077...

Pressure Switch features 330-

Series 800 Pressure Switch provides continuous pressure monitoring and allows programming of set points without unit pressurization. Set points, contact types, and switch function are adjustable using 2 buttons located below main 4-digit display. Switch incorporates an electronic pressure switch/pressure transducer combination with local indication and an analog output of 4 mA or 0-10 Vdc. Other...

Steel Wire Selection Guide for Various Applications

Download this eBook to learn about how steel wire products can be used for a variety of applications.

Light Level Switching Ballast accommodates F14T5 lamps.

Switching from full to half output via wall switch or lighting relay, BallastarÃ-® T5 (part no. B214PU115S50A) has ballast factor of 1.15 and can operate one or two F14T5 lamps. It provides max light output for 2-by-2 fixture applications and illuminates entire area evenly. Operating from 120-277 V, 50 or 60 Hz, ballast includes end-of-lamp-life shutdown circuitry with auto re-strike for safe...

Vertical Headers suit blindmate applications.

Based on 4.2 x 4.2 mm centerlines, PE Series consists of wire-to-wire, wire-to-board, and wire-to-panel connectors available in even position sizes from 2-24. Contacts are rated for 9 A max and 600 Vac. Using headers, designers can create systems where exact positioning of connectors is aided by funnel lead-in of housing to permit alignment and mating. Applications include power supplies, vending...

Desktop Power Supplies feature medical safety approvals.

With efficiency in excess of 85% and no load power consumption of less than 0.5 W, PMP150 Series meets Green Power requirements, including CEC Level IV. Units provide single output voltages of 12, 15, 19, 24, and 48 Vdc and are suitable for applications requiring up to 150 W of external power with IEC60601-1 Creepage and Leakage requirements. Housed in 8.17 x 3.00 x 1.57 in. enclosure, devices...

Fin Tube Covers feature simple one-piece design.

Fin Tube Covers are designed to install over most wall-to-wall, floor-mounted, and wall-mounted electric baseboard heating systems. Covers are pretreated and powder-coated inside and out for finishing that is damage, chip, scratch, fade, and tamper resistant. Units are available in 6 standard colors, or unlimited custom colors; in Grecian, Cloverleaf, or Octagonal grill styles; and in any length,...

Circular Plastic Connectors suit medical applications.

Featuring shock resistant housings, push-pull mating, and self-latching mechanism, CPC - Medical Connectors come in 5, 6, 7, and 10 contact positions with max current ratings of 7, 6, 5, and 3 A, respectively. Wire-to-panel units are sterilizable via autoclave, STERRAD 100 S1, CIDEX +, and EtO. With mating force of 2.5 lb and unmating force of 1 lb, connectors are suited for surgical instruments,...

Generator Protection System uses Synchrophasor technology.

Designed to protect and control medium to large-sized ac generators, Model G60 supports Synchrophasor technology, which allows power providers to monitor how instabilities are affecting points of generation. Measurements are updated every 16.67 ms, providing critical recording of power system disturbances. Accumulated Over/Under frequency protection monitors amount of time generator has been...

TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series

For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.