Pluggable Relay System is suited for automation controls.
Used for signal conversion, isolation, and amplification, 6.2 mm thick flareMOVE series is offered in SPDT and DPDT, Form C contact configurations rated for 250 Vac nominal, with contact current ratings at 8, 10, and 16 A max. Design, which facilitates installation/replacement, has screw clamp base, dc polarity protection, LED indication, and reverse voltage protection diode on coil. Series is...
Read More »Connectors offer plug-and-play Ethernet connectivity.
Rated for IP65 usage in any industrial application requiring Ethernet connectivity and signaling or power, Multipole revosFLEX Connectors are UL and CSA approved for Cat 5 cabling and 100 Mbit/s. Signal/power connections are rated for 480 V/10 A circuits. Units offer connections in field for fieldbus communications, signal connections for watchdog circuits, or power connections for field devices...
Read More »POL Power Modules feature 1.5% output voltage regulation.
Non-isolated, plug-in T2 Series supports step-down dc/dc conversion from 4.5-14 V input with adjustable output voltages down to 0.7 V at output currents up to 50 A, making them suited for IBA applications. TurboTrans(TM) technology enables power supply designer to dynamically tune modules using single external resistor to meet specific transient load requirement, and SmartSync function allows...
Read More »
Flat Panel Controller converts RGB and DVI input.
Without requiring a PCI or AGP slot, RoHS-compliant CRTtoLCD-5 assembly converts analog RGB or DVI input signals into digital TTL or LVDS signals for TFTs. Integrated Genesis gm5621 chip provides resolutions up to SXGA. Able to process input resolutions up to UXGA and scale image to appropriate size for panel, assembly is available with FLEX32 interface for control of 18-bit TTL flat panels or...
Read More »
Retem System: Breakthrough Technology in Soil Stabilization & Erosion Control
This white paper provides an overview of Retem Systems breakthrough technology.
Read More »
Touch Sensor ICs add touch control to almost any product.
Designed for charge-transfer capacitive touch-sensing switch applications, QT110 series creates touch-sense fields through dielectric surfaces such as plastic or glass up to 4 in. thick. QTouch sensor ICs can also turn small objects into sensors and work through gloved hands. Along with lifetime auto-calibration and drift compensation, series features current consumption down to 10 Ã-µA and...
Read More »Electronic Ballasts replace magnetic T12 ballasts.
Available for 1- and 2-lamp applications, Basic-12(TM) Ballasts comply with federal ballast efficiency requirements for installation into new fixtures as well as with 2010 requirements for replacement ballasts. Rapid Start units are wired identically to magnetic ballasts they replace, and mounting dimensions are identical as well.
Read More »DC Gearmotor develops 72 lb-in. torque at 250 rpm.
Accepting any 24 Vdc source including battery power, Model MMP-S28-150C-24V GP81-014 requires 13.4 A at 24 Vdc to generate full load output torque. It produces 8.5 Nm continuous torque at 250 rpm and 90.0 Nm peak. Rated IP54 for operation in harsh environments, gearmotor measures 3.2 in. dia x 8.5 in. long and has keyed output shaft of 19 mm dia x 40 mm long. Mounting is accomplished with 4 face...
Read More »Rotary Switches offer continuous rating of 30 A at 600 V.
Configurable with up to 8 positions and up to 20 poles, Detent-Action Series 24 features fully enclosed decks and self-cleaning, silver-plated, double-wiping contacts for low-resistance contacting of .01 Ω max. Molded phenolic insulating disks provide minimum insulation resistance of 100 MΩ. Make-before-break contacts allow sequential connections on same switching deck. Other features include...
Read More »Buck Converter Chip Set targets Vcore designs.
Utilizing PowerTrenchÃ-® MOSFET technology, high-side control MOSFET Model FDS6298 and low-side synchronous MOSFET Model FDS6299S optimize space in notebooks using Intel Mobile Voltage Positioning specifications. Chip set features low Qgd of 3 nC at VGS=4.5 V for fast switching, as well as Qgd/Qgs ratio of less than 1 to limit potential for cross-conduction losses. As matched pair, units are...
Read More »Lead Acid Batteries have float life of 15-20 years.
EHM sealed Gel SLA Batteries employ heavy-duty lead calcium alloy grids and gas recombination system that converts generated gas to water. Along with safety sealing, products feature automatic gas pressure venting and separators that contain acid flow for stable mounting in any position. Batteries, which measure 151 x 50 x 94 mm and are rated at 6 volts @ 12 A hr, are suited for emergency...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
