New Electrical Equipment & Systems Products

Supervisory IC monitors UV or OV for power supplies.

Model LTC2909 features single select pin that chooses one of 3 polarity combinations for two 0.5 V adjustable inputs, which have threshold accuracy of Ã-

Compression Connectors/Couplings have raintight design.

Raintight Compression connectors and couplings as well as PVC jacketed MC connectors and couplings are completely assembled, UL-listed, steel (Ã-½-2 in.) and zinc (Ã-½-4 in.) fittings. Connectors feature knockout gasket that prevents water seepage into box, while connectors and couplings utilize plastic sealing rings that protect water from entering conduit. PVC-jacketed MC cable...

Power Supplies facilitate safe PCB design.

Featuring mini-IEC input connector and detachable line cord for AC power input, AC/DC Power Converters eliminate exposed high-voltage electrical connections from PCB. With full-load operating temperature of -40 to +70Ã-

Board-To-Board Connector targets portable electronics.

Designed with 0.4 mm pitch and 1.0 mm stacking height, Series 5805 employs twin-rib-shaped plug side contact that eliminates foreign obstacles from interfering with contacts. Fine lock mechanism with firm clicking response ensures secure termination. Connector allows users to check conductivity and short circuits under mated conditions. Since no metal is exposed on bottom of connector, Series...

Lanyards & Lanyard Assemblies - Attach and Secure Your Components

To learn more about the different types of lanyard options available or which to select for your specific application, download our product guide.

Half-Rack PDUs support 3-phase power.

Designed for rack-mount applications with 3-phase power in and single-phase power out, Monitored PDUs fit 22-47U racks and feature 12 C-19 outlets with color-coded load identification for all receptacles, display, and circuit breakers. Front panel has 2-digit, 7-segment LED digital display, which shows current in each circuit breaker, scroll button to scroll through values, and 6 LEDs, which...

Half Brick DC/DC Converter has 4:1 input voltage range.

Manufactured in 5-sided aluminum case measuring 2.28 x 2.40 x 0.50 in., 50 W VHB50W series is available with 9-36 or 18-72 Vdc inputs and offers efficiencies up to 84%. With output voltages from 3.3-24 V, series is comprised of 10 models with half brick pin-out, 1,500 Vdc isolation voltage, 0.20% line and load regulation, and -40 to +100Ã-

Steel and Wood Stud Boxes align at right angle to stud.

Designed for use with Ã-½ or 5/8 in. wallboard, 22.5 in.Ã-³ Steel and Wood Stud Boxes accept eleven No. 14, ten No. 12, and nine No. 10 wires. Bracket countersink allows for No. 8 wafer head or dry wall screws with minimal wallboard bow. Classified for 2 hr wall and ceiling fire resistance, products have Height Site alignment guide and box levelers. Wood Stud Box offers hands-free...

Card Edge Connectors enable SHB Express(TM) backplane designs.

Vertical PCI Express(TM) Card-Edge Connectors support backplane designs based on System Host Board Express(TM) PCIe Specification. Connectors at interface between SHB and backplane are defined as x8 and x16 PCIe connectors. Backplane slots that interface with PCI Express peripherals can be supported with x1, x4, x8, or x16 PCIe connector links. Each serial PCIe lane is comprised of differential...

Solid State Relay switches up to 80 A loads.

Hockey Puck style SG-34F is offered in models that can switch loads from 40-80 A at voltages up to 530 Vac. Offered with ac or dc inputs and zero-cross or random-phase turn on, models include built-in snubbers, optional LED indicators, and 1,200 Vpk blocking capability. Along with min off-state (dv/dt) capability rated at 500 V/Ã-µs, product features back-to-back SCR output circuitry and...

Grounding Device helps optimize HVAC/R systems.

Available in sizes to fit ac motors ranging from 1-1,500 hp with shaft dimensions from 0.311-6.020 in., AEGIS SGR(TM) Conductive MicroFiber(TM) Shaft Grounding Brush safely channels harmful shaft current away from motor bearings to ground, preventing electrical bearing damage, noise, and motor failures. Brush is unaffected by dirt, grease, or other contaminants. Conductive microfibers work with...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!