Electrical Equipment & Systems

Digital Step Attenuators target broadband and CATV markets.
RF Attenuators

Digital Step Attenuators target broadband and CATV markets.

Supplied in 4 x 4 mm 20-TQFN and 5 x 5 mm 32-QFN packages, respectively,- 75 Ω Models F1975 and F1977 include Glitch-Free™ technology, which ensures low overshoot and ringing during MSB transitions. Devices feature frequency range of 5–3,000 MHz, max operating power up to 28 dBm, return loss of 18 dB, and max step error of 0.1 dB at 1 GHz. DSAs provide gain control in CMTS, fiber...

Read More »
Switches

Optical Circuit Switch provides up to 384 x 384 fiber ports.

Occupying 4 RU of rack height, Series 7000 is based on DirectLight™ optical switch technology, which achieves optimized all-band performance for optical loss, crosstalk, and back reflection. Software-defined,- non-blocking all-optical matrix switch can route over 3.7 Pb/s of optical traffic, with up to 9.6 Tb/s capacity per fiber. Platform offers set of configurable value-added functions,...

Read More »
Wire Management Products come in diverse configurations.
Labels

Wire Management Products come in diverse configurations.

Offered in various configurations, materials, and wire ranges,- ILSCON® terminals feature UL-Certified design. Wire markers, also available, come in several types: slide/snap-on, adhesive pre-printed white vinyl labels, as well as cassettes and kits. Cable ties and mounts have industry-standard design and come in different lengths, tensile strengths, and colors. Without requiring heat source,...

Read More »
Fuses

Medium Voltage Fuse integrates controllable actuator modules.

Applicable whether searching for- sensitive overload protection solution or arc-flash mitigation, 15 kV Medium Voltage Controllable Fuse (MVCF) fits into existing fuse cabinets and integrates controllable fuse actuator/interface modules, fiber optic cable connection, and low-voltage control cabinet. Design facilitates connection and installation within standard transformer fuse enclosures.

Read More »
DVIGear's DisplayNet(TM) Wins Best of Show Award at ISE 2016
Transmitters

DVIGear's DisplayNet(TM) Wins Best of Show Award at ISE 2016

Revolutionary AV Signal Distribution Platform Recognized by Industry Magazine MARIETTA, Ga. – DVIGear, a leading manufacturer of digital connectivity products, recently won an ISE 2016 Best of Show Award from NewBay Media's AV Technology Magazine for its AV-Over-10GbE signal distribution platform DisplayNet™. DisplayNet™: AV Connectivity - Redefined DisplayNet™ is an entirely new...

Read More »
Desktop Power Supplies meet ITE, medical application standards.
Power Supplies

Desktop Power Supplies meet ITE, medical application standards.

Accepting universal input of 90–264 Vac, PEAD310 and PEAMD310 (medical) Series provide fully regulated, single-output voltages of 12, 15, 19, 24, 36, and 48 Vdc. These Level VI efficient switching power supplies, which offer continuous 250–310 W output power, come in sealed, fanless case that measures 7.8 x 4 x 2 in. IEC60320/C14 inlet is standard, and optional C18 inlet supports...

Read More »
Controls and Controllers

Wireless Modem works with low-power wide-area networks.

FCC certified for use in 915 MHz band, Model RN2903 adds long-range- LoRaWAN™ network capability to embedded designs by integrating LoRaWAN protocol stack running on low-power PIC® microcontroller, along with LoRa radio and embedded antenna matching circuit. Driven by LoRa Alliance, LoRa technology is able to achieve range of up to 10 miles and 10-year battery life. Applications include...

Read More »
Boost Controllers simplify automotive power system design.
Controls and Controllers

Boost Controllers simplify automotive power system design.

Operating from 12 V battery supply, Models ISL78227 and ISL78229 boost output voltage to 24, 36, or 48 V for 200–800 W trunk audio amplifiers, start-stop systems, and headlamp LED strings. Two-phase synchronous boost controllers support input and output ranges of 5–55 V and deliver greater than 95% efficiency. Ability to interleave 2 controllers for 4-phase application effectively doubles...

Read More »
Regenerative Grid Simulator comes in 15
Power Supplies

Regenerative Grid Simulator comes in 15

Used for testing grid-tied inverters, vehicle to grid (V2G),- and other AC power products, Model 9410 comes in standard models that include 3 programmable channels. This allows any combination of DC as well as 1θ, 2θ, 3θ AC outputs. With modular design that permits power to be expanded in 12 kW increments, this 4-quadrant, regenerative, rack-mountable, 12 kW grid simulator simplifies IEEE...

Read More »
Power Supplies

Redundant Rack Systems suit mission critical applications.

Supplied in 19 in. chassis, Redundant and Dual Redundant Rack Systems- range from 250–5,000 W with output voltages of 24, 48, 60, 100, 110, and 150 Vdc and input voltages of 115/230 Vac at 50/60 Hz single phase. Systems are intended for mission critical applications where high reliability is essential, including CBTC, PTC, signals, controls, and substation emergency lighting. Typical...

Read More »

All Topics