Test & Measurement

Megohmmeters

Portable Meter measures insulation resistance.

Handheld, battery operated IR800 checks insulation resistance of wiring, communication cables, motors, appliances, and electronic products and controls. It measures resistance up to 2000 Mohms at ac and dc voltages of 250, 500 and 1,000V. Zero offset adjustment provides automatic removal of lead resistance. Unit has rotary switch for selection of test type, large test button to initiate...

Read More »
Holding Assemblies are used in metal product manufacturing.
Magnets

Holding Assemblies are used in metal product manufacturing.

Permanent Magnetic Holding Assemblies are designed for positioning, stabilizing, holding, and feeding materials, parts, and scrap. Various standard configurations and sizes are available with insulated Ceramic, Alnico, and Rare Earth Magnets. Assemblies for watertight and high-temperature applications are also available.

Read More »
Hipot Tester utilizes 0 to 5KV output voltage range.
Testers

Hipot Tester utilizes 0 to 5KV output voltage range.

LH-150T AC Hipot Tester, featuring 500 VA output rating, is designed to provide table-top dielectric testing of electrical products. Five-position cut-off current selector switch allows user to set output current trip point to specified level. Tester is supplied with test leads and high voltage probe with remote control switch.

Read More »
Detector Array characterizes polymers and proteins.
Viscometers

Detector Array characterizes polymers and proteins.

Triple Detector Array (TDA) is available with low angle light scattering (LALS) detector, which operates at 7 deg without correction or extrapolation. TDA determines absolute molecular weight, molecular structure and molecular size (to less than .5 nm) of natural or synthetic polymers. It employs concentration detector, viscometer and light scattering detector acting in concert, with each...

Read More »
Flowmeters detect leaks in pipelines.
Flowmeters

Flowmeters detect leaks in pipelines.

Insertion Turbine Flowmeters feature typical accuracies of 1% and can approach ±0.25% depending on type of transmitter specified. Series has 10:1 flow turndown range and can be specified for use in velocities up to 50 fps. Various types are available including fixed, bi-directional, and adjustable for low and high pressures. Applications range from 4 to 72 in. pipe diameters.

Read More »
Measuring Equipment

Measuring Machine measures with +/-.006 in. accuracy.

TRUMPF QUALIFIER (TQ) light/laser-based measuring machine can measure punched, formed, and laser-cut sheet metal parts simultaneously. Measuring machine also makes developing programs using reverse engineering possible by detecting actual contours of parts and converting data into CAD files. Available in 2 versions, TQ 2500 has 4 by 8 ft measuring area, and TQ 1250 has 4 by 4 ft measuring area....

Read More »
Force and Weight Calibrator is pocket-sized.
Calibrators

Force and Weight Calibrator is pocket-sized.

Model 125 supplies mV/V level signals for testing, calibrating, and troubleshooting load cell/scale indicators in any environment. Concise output references for 0, 1, 2, or 3 mV/V are achieved by using metal film resistor network, discrete wire wound resistors, and 2-pole 4-position rotary switch. 350 ohm input and output impedance matches typical strain gage devices. 4 permanent binding posts...

Read More »
Position Monitor is suitable for hydro applications.
Position Indicators

Position Monitor is suitable for hydro applications.

Model 1250B, designed for gate and valve monitoring, can accept inputs from rotary synchro transmitter devices. It is configured to give proportional gate/valve position signals that can be interpreted as position in Percent-of-Closed status. Model 1250B performs nonlinear conversions, and can display data in user-defined units such as degrees, percent, inches, or feet on its 5-digit LED panel....

Read More »
Pressure Calibrator has dust- and splash-resistant case.
Calibrators

Pressure Calibrator has dust- and splash-resistant case.

Model 717 100G handheld, pressure calibrator measures pressure to 100 PSIG/690 kPa. It is suitable for gage, differential, absolute, vacuum, and compound applications from one inch of water to 10,000 psi. Model 717 100G measures pressure with 0.05% accuracy through its internal 100 PSIG sensor. It is equipped with 1/8 NPT pressure fitting, and is compatible with non-corrosive gases and liquids.

Read More »
Capacitance Meter comes complete with test leads.
Testers

Capacitance Meter comes complete with test leads.

Battery-powered, portable hand-held Model 810C can be used for measuring most capacitive components. It has zero adjustment knob, front-panel 3-1/2 digit LED display, test lead jacks and direct plug-in test sockets. Range is 20 mf to 200 pf with accuracy of ± 0.5% of reading, + 0.5 pf. It weighs 10 oz and measures 5.7 x 3.0 x 1.6 in. Meter comes complete with 9V alkaline battery and user...

Read More »

All Topics