Electrical Equipment & Systems

Thermax SEAMLESS-T Composite Aerospace Wire Qualified to New AS22759 Specification Variations

INDIANAPOLIS, IN - Thermax announced today that it has been officially qualified to the new AS22759 /180-/192 wire variation standards issued by the Naval Air Systems Command (NAVAIR). In receiving this qualification, Thermax again raises the bar for outstanding performance, offering aerospace users a more mechanically durable wire via a tape-wrapped construction that features a smooth,...

Read More »
Wireless Mobile Data Terminal complies with EOBR regulations.

Wireless Mobile Data Terminal complies with EOBR regulations.

Model TREQ-M4x mobile data terminal features GPS receiver as well as quad-band GSM/GPRS modem for location-based applications such as mapping and navigation, and data communication for messaging and routing. Suited for vehicle system integrators, unit includes 480 x 272 pixel, 4.3 in. LCD with resistive touchscreen, as well as MarvellÂ-® PXA 300 CPU, J1708 and J1939 CANbus interface, magnetic...

Read More »
LED Dimmer Switch features touch-sensitive design.

LED Dimmer Switch features touch-sensitive design.

Featuring ETL Certification, Reign Touch 12 V LED Dimmer houses touch-sensitive aluminum pad that when tapped quickly, turns lights on/off, and when touched and held, increases lights' brightness. Unit also features discreet on-off toggle switch and smooth dimming from 100%-0% with no flickering, humming, or jumping. With opto-isolated and regenerated PWM injector, it is possible to draw...

Read More »
Multi-Cable Bushing System offers wide variable clamping range.

Multi-Cable Bushing System offers wide variable clamping range.

Resistant to oil, grease, UV rays, and ozone, SKINTOPÂ-® CUBE consists of frame and flexible clip sealing modules, which are available in 4 clamping ranges of 4-6, 6-9, 9-12, and 12-16 mm. After installation, cable is secured against vibration, strain relieved, and sealed in accordance with IP64. Matching, glass-fiber-reinforced polyamide frames, available for 16-pin or 24-pin connector...

Read More »
Low-Profile Battery Holders accommodate 18650 cells.

Low-Profile Battery Holders accommodate 18650 cells.

Available in single- and dual-cell configurations, SMT and THM Lithium-Ion holders for 18650 batteries feature heat-resistant Nylon housings and Gold-plated Phosphor Bronze contacts. Battery installation and/or removal does not require tools, and design accommodates lead (Pb)-free solder as well as traditional reflow processes. Suited for THM and SMT use, holder helps meet demands for...

Read More »
ADCs provide double data rate LVDS digital outputs.

ADCs provide double data rate LVDS digital outputs.

Housed in 6 x 6 mm and 9 x 9 mm QFN packages, 12-bit Model LTC2152-14 and 14-bit Model LTC2157-14 are single and dual channel simultaneous sampling ADCs, respectively. Operating from single 1.8 V supply, Model LTC2157-14 consumes 303 mW/channel at 250 MS/sec with SNR performance of 70 dB and SFDR of 90 dB at baseband with 1.5 Vp-p input range. Analog full power bandwidth of 1.25 GHz and ultralow...

Read More »
Micro DC-DC Converters reduce noise, board space occupation.

Micro DC-DC Converters reduce noise, board space occupation.

Measuring 2.5 x 2.0 x 1.1 mm (max), LXDC2HL series buck converters work with 2.3-5.5 V source, such as Li-ion battery, and use ferrite multilayer substrate that incorporates power inductor. Length of connection between controller IC and inductor is close to zero, and efficiency is 88% typ. Across 7 models, output voltages range from 1.2-3.3 V with max load currents from 600-300 mA. All have...

Read More »
AC-DC Power Supplies offer 94% typical efficiency.

AC-DC Power Supplies offer 94% typical efficiency.

Operating directly from 3-phase inputs, ADN-C Series has 320-540 Vdc input range, capable of accommodating standard line voltages worldwide. Models ADN20-24-3PM-C and ADN40-24-3PM-C are rated 480 W and 960 W and can deliver up to 20 A and 40 A, respectively. Both DIN rail mounted models produce single 24 Vdc output, which is user adjustable up to 28 Vdc. Housed in IP20-rated metal cases, supplies...

Read More »

KVM over IP Rack Trays optimize datacenter and server control.

ADDERView RDX 1000 is 16-port KVM rack tray allowing CATx based connectivity to almost any server/computer type, while ADDERView RDX 1000IP features additional KVM over IP user and ADDERView RDX 5000IP provides 4 KVM over IP users. Featuring TFT LCD and keyboard and touchpad control, all units can be expanded to control up to 256 computers with as many as 64 KVM over IP sessions running at once....

Read More »

Coherent Mixer integrates multiplexer/demultiplexer.

Coherent Mixer, a key component required at signal receiver in optical digital coherent scheme, is integrated with polarization multiplexer/demultiplexer, resulting in compact device that eliminates characteristics degradation at connected part. Designed for ultra-high bit rate 100 Gbps digital coherent transmission, device features loss uniformity of 1 dB or better, low skew of 1 psec or better,...

Read More »

All Topics