New Electrical Equipment & Systems Products

Enclosure accepts electrical and automation equipment.

Available in 54 sizes from 24 x 12 x 6 in. to 42 x 36 x 16 in., 5412 ESCS console top enclosure has slanted top with 60Ã-

Junction Box provides dual I/O on each port.

The 4-pin, picofast Junction Box allows users to consolidate wiring of 4-pin sensors or connect up to sixteen 3-pin sensors. Available with 4 or 8 ports, unit offers snap-lock and M8 threaded connection. Top-mount, home-run connector or side-exit, integral cable facilitates access in tight areas. Fully encapsulated IP67-rated unit, with nylon housing, has operating voltage of 10-48 Vdc.

Plugs and Connectors feature watertight construction.

Perma-TiteÃ-® 2 plugs and connectors, rated NEMA Type 4, 4x, 6p, and IP 66 and 67, are UL listed and CSA certified. Configurations are from 15-30 A, up to 600 V, single- and 3-phase, and devices withstand hose-down pressures up to 1,000 psi. Color-coded, cord-grip bushings accommodate various cable diameters. Elastomeric housing has ergonomically designed finger grips and resists impact,...

Lighting Control Transformers feature overload protection.

Suited for lighting control panels, transformers automatically reset after experiencing overload situation. Various UL and C-UL listed models are available, each with 40 VA continuous and 75 VA intermittent capacity ratings for 50/60 Hz service. Input voltages include 115, 220, 240, 277, 347, and 115/277 or 115/240/277 V, all with 24 V output. Each size/model includes UL Recognized Class 130 (B)...

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

DC/DC Converters support up to 930 A/-µs load transients.

Non-isolated, point-of-load, Series VRM10 meets core power requirements of high-end processors. Converters offer dynamic voltage programming and continuous current outputs up to 85 A. They use 4-phase buck conversion topology with interleaving to achieve switching frequency of 2.2 MHz, yielding conversion efficiencies up to 86% when delivering 85 A at 1.4 V. Complying with Intel's VRM10.0 and...

DC/DC Converters power non-isolated POL converters.

Quarter-brick Model QB1448 and half-brick Model HB2048 are 12 V, fully regulated, bus converters that operate under input range of 36-75 V. Model QB1448 provides 14 Adc at 90% efficiency and is suited for datacom and DPA applications. Model HB2048 provides 20 A at 91% efficiency and includes active current sharing capability, which provides stress balancing. It is suited for ATE, RF amplifiers,...

Isolators protect process equipment and power input devices.

AC/DC-powered 630T Series isolators and signal splitters feature internal excitation supply to drive up to two 2-wire transmitters or other input loop devices. Multi-channel isolators provide space-efficient solution to eliminate ground loops, filter signal noise, and block high voltage surges. Measuring 1 in. wide, single/dual-channel isolators receive 4-20 mA inputs and provide fully isolated...

Copper Cabling Systems meet network connectivity needs.

Exceeding TIA/EIA Cat 5e Standards, Belden IBDN System 1200 supports 1.2 Gb/s network applications and provides clear bandwidth up to 160 MHz. System 2400 exceeds TIA/EIA Cat 6 standards, supports 2.4 Gb/s, and delivers 250 MHz bandwidth. Providing 300 MHz, System 4800LX performs beyond Cat 6 and supports demanding, ultra-high speed and multi-Gigabit protocols. All include UTP cables, hardware,...

DC Power Supply has high density and multiple standard I/O.

Providing up to 1500 W in 1U-high package, Series N5700 features PC-standard I/O including LAN, USB, and GPIB. Series consists of 24 single-output programmable power supply models that provide stable output power and built-in voltage and current measurement from 6-600 V and 1.3-180 A. Power supply instruments can be configured in parallel or series operation. All models have universal ac input...

Structured Cabling System offers optimum data security.

Belden IBDN FiberExpress optical fiber systems support centralized and fiber-to-the-desk topologies as well as backbone and campus configurations. Used to support Gigabit and multi-Gigabit communications protocols and networked applications, end-to-end cabling solutions utilize modular and pre-terminated components. Components include multimode and singlemode cables, modular FiberExpress Manager,...

TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series

For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.