Electrical Equipment & Systems

LED Driver independently controls up to 4 white LEDs.

LED Driver independently controls up to 4 white LEDs.

Used for backlighting color displays in portable applications, SP6687 charge pump can generate regulated output current using 3 operating modes: linear regulator, 1.5x charge pump, or 2x charge pump. Architecture has 1 Â-µA shutdown current and built-in soft start. Providing matched current source of up to 120 mA total for all channels, driver is designed with integrated current sense...

Read More »
Integrated Circuits suit switched mode power supplies.

Integrated Circuits suit switched mode power supplies.

Series STR-A6100 is designed for power supplies with output power up to 20 W at universal input or 24 W at 230 Vac. Auto-standby function reduces input power consumption to less than 50 mW at 230 Vac by burst-mode operation, which is stabilized by auto-bias function. Series STR-W67xx includes quasi-resonant topology ICs in fully molded TO-220 package that contains controller chip and MOSFET....

Read More »
Power and Signal Port provide IP 65 protection.

Power and Signal Port provide IP 65 protection.

HanÂ-®-Port provides ability to connect external devices, such as laptops or PCs, for set-up, programming and error diagnosis of industrial installations directly at control cabinet without opening cabinet door. Zinc die cast frames are equipped with transparent covers, while locking system protects against accidental opening. Modular design allows combination of different inserts for power...

Read More »
Gas Tube Arresters are offered in surface mount package.

Gas Tube Arresters are offered in surface mount package.

Measuring 0.177 x 0.126 in., Series GT-SMD1812 provides dc breakdown voltage ratings of 150, 200, 300, 350, and 400 Vdc, each offered with 1,000 or 2,000 A impulse current rating. Hermetically sealed units have insulation resistance of 104 Mohm and inter-electrode capacitance of 1.0pF. Arresters are suited for PBX telephone circuits, voice and data lines, solid-state circuitry, or anywhere...

Read More »
Cable Connectors feature one-piece, twist-on design.

Cable Connectors feature one-piece, twist-on design.

TEK-NUT(TM) Cable Connectors terminate teck and jacketed metal clad cable to junction boxes, control centers, panelboards, and enclosures used for electrical distribution or motor control. They come with knockout sealing O-ring to provide environmental seal, along with locknut, anti-short bushing, and rainboot for wet locations. Featuring copper-free aluminum body, corrosion-resistant connectors...

Read More »

Power Supplies feature auto-ranging 90-264 Vac input.

DIN-rail-mounted Series CSF includes units that provide 5 Vdc at 8 A, 12-15 Vdc at 6 and 8 A, 24 Vdc at 3 and 5 A, and 48 Vdc at 2.5 A. They feature pluggable terminal block connections, plus short circuit, overload, and over-temperature protection. Models CSF3 and CSF5 are offered in parallel version, which allows them to be used in redundant applications without additional components, and...

Read More »
PCB Mount Connector suits RF and video applications.

PCB Mount Connector suits RF and video applications.

Panel-grounded, dual BNC connector, Model X-2(TM) is nickel-plated zinc with gold-plated contacts and gray insulation outer cover. With optional metal back cover, unit offers 100% full shielding. Featuring quick-connect characteristics, connector is provided with impedance of 50 or 75 ohms, and in vertical or right angle stacked configurations. It offers VSWR to 500 MHz and meets or exceeds...

Read More »
Entry/Exit Guarding Device guards robotic work cells.

Entry/Exit Guarding Device guards robotic work cells.

With operating range of 8 m and response time of 16 ms, PA4600-BB provides 2 beams spaced either 19.6 in. or 23.6 in. apart for torso detection at entry/exit openings to hazardous applications. System has input voltage of 24 Vdc, and 2 solid state PNP safety control output signals provide 625 mA each for compatibility with standard safety relays. PA4600-BB is type 4 ESPE device per UL61496, and...

Read More »
Logic Translator operates over 1.1-3.6 V range.

Logic Translator operates over 1.1-3.6 V range.

Model FXL2T245L10X, low-voltage 2-bit logic-level translator is offered in lead-free, 10-terminal, 1.6 x 2.1 mm MicroPak(TM) package. With output enable (3-state) function that allows full reverse data flow without conflicts, translator is targeted for use in 1.2, 1.5, 1.8, 2.5, and 3.3 V digital circuits to translate from lower to higher logic levels or vice versa, accommodating low voltage...

Read More »

Relays suit general purpose applications.

Series RJ and RQ both have contact ratings of 12 A, SPDT and 8 A, DPDT. Series RQ also offers 16 A, SPDT model. With profile of 15.5 mm, RJ blade relays are suited for crowded control panels when used with SJ socket. Optional green, non-polarized LED provides power status from multiple directions. Measuring 12.6 x 29.0 x 15.6 mm, PCB relays in RQ series feature pin terminal separation of 3.5 and...

Read More »

All Topics