New Electrical Equipment & Systems Products

Interface Converters allow data transmission up to 4,000 ft.

Available for half/full duplex, IC11A-F & IC11-PLUS intelligent RS-232 to RS-422/485 converters attach on one end to RS-232 device and on the screw terminal end to an RS-422/485 device. Miniature converters allow data transfer rates up to 120 kbps. Power is acquired directly from computer's serial port, or by using included USB-plug cable.

Interface Converter suits defense applications.

Featuring ruggedized design, Model 4149 operates at speeds of 1.5 Mbps for RS232-to-fiber conversion and 20 Mbps for RS485/422-to-copper conversion. Power input is protected from transients and features 3 kVdc isolation to prevent system ground loops. Powered from 9-36 Vdc input range, converter operates from -40 to +85Ã-

Transmitter tracks up/down pulse totals.

Housed in 35 mm DIN rail case, Laureate Model TA-FRT is powered by 95-240 Vac Ã-

Integrated Circuit suits 12 V hot-swap applications.

Combining Hall-effect current sensing with hot-swap control circuitry, Model ACS760 incorporates external high-side FET gate drive, and produces analog output voltage proportional to applied current. User-controlled soft-start/hot-swap function is accessed via logic enable input pin. Housed in QSOP package, unit is designed for single-supply operation from 10.8-13.2 V. It has 1.5 mW internal...

Grips and Handles - Providing a Strong and Comfortable Grip

To learn more about the different types of Grip and Handle options available or which to select for your specific application, download our product guide.

Simrit Introduces Plug & Seal Connections to the Americas

Single Part Connector Offers Fast Fit, Greater Reliability and Longer Life at Lower Cost PLYMOUTH, Mich., Feb. 28, 2007 - To help manufacturers build more robust products at less cost, Simrit, the industrial sealing products division of Freudenberg-NOK, is bringing its proven Plug & Seal plug connection technology to the Americas. Simrit's Plug & Seal connectors are specially designed to provide...

ifm efector Introduces Non-Contact, Fail-Safe Inductive Sensor and Multi-Function Relay Approved for Safety Applications

June 18, 2007 - ifm efector introduces a new fail-safe inductive sensor that does not require a coded magnet or keyed target for safe operation. The wear-free, one-piece solution replaces the traditional two-piece safety switch by integrating ifm's patented, non-contact inductive sensing principle that is rated up to Category 4 according to EN954-1 for safety applications. Similar to an inductive...

Minicom to Showcase Latest Digital Signage Offerings at Infocomm07

LINDEN, New Jersey, June 12 // -- Minicom Advanced Systems will present its next generation of player-to-screen extension and distribution solutions for digital signage at this year's InfoComm07 being held June 19-21 at the Anaheim Convention Center, Anaheim, CA. Minicom will be located in Hall B at booth 5940. According to Eran Kessel, Minicom's Vice President of Marketing, Minicom is the only...

HDMI Selector Switch is HDCP(TM) compatible.

Enabling up to 5 HDTV source devices to be plugged in simultaneously and switched between, 5-Port HDMI Selector Switch provides inputs for devices such as DVD, Blu-Ray and HD-DVD players, gaming systems, and high-definition set top boxes. Unit supports 480i, 480p, 720p, 1080i, and 1080p video resolutions as well as DDWG standard for HDMI-compatible monitors. It features front panel LEDs,...

Level Switch is designed for use with slurries.

Used when pollution remediation system requires level switch in particulate-heavy sewage or slurries, L-5 with NEMA 4 cover and L-5SS with stainless steel cover employ one or two stainless steel floats on phosphor bronze shaft to detect difference in specific gravity between oil and water. This 15 A, 120/240 Vac switch signals pump, alarm, or solenoid valve, and dry circuit can be specified for...

Switching Power Supplies offer flexible output and options.

Featuring universal AC input with Active Power Factor Correction, APS600/800Rx-N Series is comprised of 600-800 W flexible output models offered in U-Frame, Top Cover, End-Mount Fan, and Top-Mount Fan package options. Products offer output voltage factory setpoint ranges for any voltage requirement from 12-60 Vdc while maintaining all safety approvals. Operating with 85% efficiency, they come...

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.