U-Shaped Gearmotor produces up to 1,000 lb-in. torque.
Compact, built-to-order type -HG gearmotors are available with 42R ac induction, 33A permanent magnet dc, and 34B brushless dc motors. Design utilizes 3-stages of gearing, providing gear ratios from 6:1-110:1. Able to output from 3-23 rpm, products are unvented with needle bearings for intermediate gear stages and large ball bearings on output shaft. They feature selectively hardened helical and...
Read More »
Electric Breaker features fatigue-reducing design.
Designed for wall or floor applications, TE 706-AVR Breaker incorporates brushless SR-motor, active vibration reduction system, and 3-level hammering power regulation. Control electronics provide continuous motor power, even during voltage fluctuations, and air flows over areas of motor, electronics, and hammering mechanism to keep tool and casing cool. Self-sharpening polygon chisels are offered...
Read More »
White LED Drivers are suited for portable electronics.
Offering efficiencies up to 80%, SiP12401 boost controller and SiP12501 boost converter provide uniform, controlled brightness in backlighting applications. Model SiP12401 drives LEDs connected in series and has 1.8-5.0 V input voltage range. Designed to drive LEDs connected in parallel, SiP12501 accepts input voltages from 0.65-3.3 V and regulates output current up to 60 mA from 0.9 V input....
Read More »
Layer 2 Ethernet Switch offers fullwire speed performance.
Along with auto-crossover, auto-polarity, auto-negotiation, and automatic MAC address management authentication capabilities, plug-and-play ComEth4100 provides 8-10 Ethernet ports compliant with 10/100/1000BT. Product, offered in 3U/6U form factor, provides 802.1 Q support for 4K VLANs or port based VLAN, 4K MAC addresses, and port mirroring. For flow control, non-blocking switch features...
Read More »
Retem System: Breakthrough Technology in Soil Stabilization & Erosion Control
This white paper provides an overview of Retem Systems breakthrough technology.
Read More »
Power Supply withstand harsh environments.
With immunity to vibrations and electrical disturbances, DIN Rail Mount Series TSP complies with EMC standards. Models are available with 12 or 24 Vdc outputs and 70-600 W output power with Power Good and Remote On/Off control functions. Units include dual-color LED status indicators, hot-swap/redundant operation, battery back-up, and voltage dip/brownout protection, as well as infinite short...
Read More »
Non-Metallic Raceways offer application-specific options.
BaseTrakÃ-® 2-and 3-channel non-metallic raceway systems feature data- or power-only accessibility and T-568 compliant bend radius. For application specific flexibility, offerings include 2-channel BaseTrak and snap-on 2-gang flush box, 3-channel BaseTrak full capacity 1-, 2-, and 3-gang boxes, and 3-channel BaseTrak 1- and 2-gang flush boxes. Impact-resistant, non-conducive design eliminates...
Read More »
Timing Belts and Pulleys minimize noise and vibration.
Constructed of abrasion-resistant polyurethane and steel or stainless steel tension members, ARC-POWER PLUS belts are available as open-ended, spliced and welded endless, and truly endless. They provide 100% tracking in both running directions without flanges. Based on overlapping tooth arrangement, smooth interaction with idler and tensioners running on toothed side of timing belt eliminates...
Read More »
DC/DC Converters feature trimmable output.
With input of 6.0-14.0 Vdc, point-of-load Series VPOLXXX-12W is available in 10, 16, and 20 A models with output voltage from 0.75-5.0 V, which is trimmable via external resistor. Converters include remote on/off and output voltage sequencing, as well as protection against continuous short circuit, output over-current, and over-temperature. Operating from -40 to +85Ã-
Read More »
Enclosures cool up to 100 Watts per slot.
With average airflow of 450 lfm, 10U rack-mount Extreme Cooling Series RME21XC is capable of cooling 75-100 W boards. Enclosures are available with 21-slot VITA 1.7 VME64x, VXS, or CompactPCI switch fabric backplane. Offered with up to 1,600 W of embedded power, units include provisions for 80 mm rear plug-in modules and transition modules in all 21 slots. Fan speed controller minimizes acoustic...
Read More »
Power Supply features 24-port PoE injection.
Suited for switch and PBX applications, 275 W Model PSM275-909 provides 12 Vdc output for switch, 50 Vdc per port in PoE, and can implement 8-24 ports in PoE system, making it suited for 10/100 BaseT Ethernet switches, security systems, VoIP systems, and blade servers. Powered from 90-265 Vac or 44-57 Vdc input, unit can be operated in redundant ac or dc configuration with external isolation...
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
