PLCC to DIP Adapters feature RoHS compliance.
Featuring 1-20 pin PLCC clock chip on top and 1-16 pin DIP clock chip on bottom, Correct-A-Chip(TM) Adapter converts PLCC-packaged type clock chip to DIP footprint without changing PCB layout. Body of adapter is .062 in. thick, glass-filled IS-410 material with 1 oz of copper traces on both sides. Male pins are brass alloy 360 with 10 Ã-µin. min gold plating per MIL-G-45204 over 100...
Read More »
DC/DC Power Module has point-of-load system design.
Offered in SMT and through-hole packages, plug-in PTH08T240F operates from 4.5-14 V input and provides up to 92% power efficiency @ 1.8 V output. TurboTrans(TM) technology optimizes transient response and reduces output capacitance to 3,000 Ã-µF, meeting 3% accuracy core voltage tolerance requirements of 3 GHz DSPs. Along with adjustable output voltage from 0.7-2 V, this 10 A, non-isolated,...
Read More »
Cabinet Enclosure targets MicroTCA applications.
Featuring modular design with stacked arrangement of open card cages, fan trays, and heat exchangers, MicroTCA 19 in. Cabinet is designed according to ETSI 300-119-3 with 44 U x 750 mm x 300 mm dimensions. It accommodates 10 MicroTCA single-width subracks, accepting 120 full-size modules or 240 compact modules plus power modules dissipating total of 6 kW in closed loop heat exchanger concept....
Read More »New Products for Safety Engineering with AS-Interface
Siemens Automation and Drives (A&D) is expanding its product portfolio of devices for ASIsafe. The additions include the new DP/AS-i F-Link, an ASIsafe K45F (4F-DI) compact module, and the ASIsafe position switches of the 3SE5 series. The DP/AS-i F-Link is a device for the seamless integration of ASIsafe slaves into Profisafe environments. It collects the signals of binary safety sensors at the...
Read More »
Why Use A Locking Cord?
Learn about the benefits of using locking cords in applications that rely on extensive technological infrastructures.
Read More »Target Board facilitates precision digital filtering.
Designed as plug-in target board for TI eZ430-F2013 MSP430 USB Stick Development Tool, MSP-Mojo enables implementation of digital filtering through embedded QF1D512 SavFIRe(TM) single-channel chip. By connecting to MSP430-eZ430, designers can use existing development tools, download code, and verify system-level performance. It features MSP430F2013 MCU, input jack, and expansion header for...
Read More »
VoI Chip Bus Converter has high-density architecture.
Featuring power density greater than 1,000 W/in.Ã-³, B352F110T30 is 300 W dc-dc converter for HV Distribution Systems, ac-dc SMPS, and RF amplifiers. This Sine Amplitude Converter(TM) (SAC) offers efficiencies over 95% and operates from 330-365 Vdc primary bus to deliver isolated 10.3-11.4 V secondary. Used individually or in multiples with paralleled outputs, Telecom-grade BCM(TM) module...
Read More »BP Solar Introduces Mono2
New Silicon Growth Process Yields Higher Efficiency in Commercial Cells and Modules A pioneer in silicon casting for solar photovoltaic cell applications, BP Solar has developed a new silicon growth process that significantly increases cell efficiency over traditional multi-crystalline-based solar cells. The new technique, named Mono2(TM), enhances BP Solar's technological expertise in the...
Read More »
Reflective Switches provide object sensing up to 24 in.
Consisting of 850 nm infrared LED and PhotologicÃ-® sensor with NPN open-collector output, both contained in opaque housing, Series OPB725 switches provides design engineers with device capable of operating in dusty, contaminated environments. With operating temperature range of 0 to 50Ã-
Read More »
Power Controllers drive P-channel MOSFETs.
Designed to work with slow moving input supplies, PowerPath(TM) LTC4416 provides soft-off feature to minimize droop when supply voltages are changing. Model LTC4416-1 is optimized for rapidly moving input supplies that must be quickly turned off. With voltage range of 3.6-26 V and operating temperature of -40 to +125Ã-
Read More »GFCI Wiring Devices add safety to construction projects.
Taking advantage of standard commercial pigtailing process, PlugTail(TM) Ground Fault Circuit Interrupters (GFCIs) promote consistent and safe installations for any commercial construction project. Products meet Federal Specification requirements and eliminate exposed terminals for finger safe application. Tail process helps prevent miswiring and offers SafeLock(TM) protection. Line includes Spec...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
