Test & Measurement

LT-4123 Dielectric Test Cell is suitable for measuring the ability to store electrical energy in liquids.
Testers

LT-4123 Dielectric Test Cell is suitable for measuring the ability to store electrical energy in liquids.

LT-4123 Dielectric Test Cell can be used to test the quality of composite materials, including transformer insulating oils and thermoset resins, and set quality benchmarks for fluids during testing and manufacturing. Unit measures AC loss characteristics and implements preferred guarded electrode (three terminal) measurement. Featuring a spout for excess liquids, product is encased in aluminum...

Read More »
Talon Model RTR 2735A Rugged Recorders come in aluminum alloy construction.
Recorders

Talon Model RTR 2735A Rugged Recorders come in aluminum alloy construction.

Talon Model RTR 2735A Rugged Recorders are offered for 1, 10 and 40 GB/sec Ethernet rates. Units come in a lightweight chassis which measures 16.0 in. W x 6.9 in. D x 13.0 in. H and weighs 25 lbs. Products are used to capture line rate Ethernet traffic on one 40 GB, four 10 GB or eight 1 GB streams. RTR 2735A offers Ethernet interface options such as RJ45, SFP+ and LC optical connections....

Read More »
SR-6500 NIR Spectroradiometer is embedded with DARWin SP data acquisition software.
Spectroradiometers

SR-6500 NIR Spectroradiometer is embedded with DARWin SP data acquisition software.

SR-6500 NIR Spectroradiometer is equipped with Miniprobe of 3 mm spot size. Featuring two rechargeable lithium-ion batteries, unit measures 31.5 x 22.9 x 38.7 cm dimensions and is operated in a temperature range of 0 to 40°C. Weighing 4.99 kgs, product comes with auto-exposure and auto dark current shutter. SR-6500 NIR is integrated with three thermoelectrically cooled photodiode arrays and is...

Read More »
Locators

R&S MNT100 RF Interference Locator features realtime signal processing.

R&S MNT100 RF Interference Locator is used to detect, analyze and locate sources of interference from 600 MHz to 6 GHz. Unit comes with gap-free realtime FFT which allows user to detect short emissions. Product features polychrome display which enables resolution of superimposed pulsed signals and can differentiate complex signals. Handheld R&S MNT100 is equipped with dual-mode antenna and is...

Read More »
PC-QD 1/8 DIN Process Counter/Totalizer features anti-jitter circuits.
Counters

PC-QD 1/8 DIN Process Counter/Totalizer features anti-jitter circuits.

PC-QD 1/8 DIN Process Counter/Totalizer is used to display position, length, or angle in units such as ft, cm or degrees. Unit’s data can be stored in non-volatile memory during power cut and offers A & B quadrature signals. Totalizer offers RS-232, RS-485 and USB communication protocol and comes with an optional 8 A contact or 120 mA solid state relay outputs. Product provides analog process...

Read More »
PC-AN 1/8 DIN Process Counter/Totalizer offers RS-232 and RS-485 communication option.
Totalizers

PC-AN 1/8 DIN Process Counter/Totalizer offers RS-232 and RS-485 communication option.

PC-AN 1/8 DIN Process Counter/Totalizer is used to display six digits of 0-1 mA, 4-20 mA or 0-10 V analog process signal inputs. Unit offers USB communication protocol and comes with an optional 8 A contact or 120 mA solid state relay outputs. Product can also display flow rates in gallons/minute or liters/sec or volumes in gallons or liters and power consumption in kilowatts. Totalizer provides...

Read More »
PC-FR 1/8 DIN Process Counter/Totalizer features decimal point 6 digit display.
Totalizers

PC-FR 1/8 DIN Process Counter/Totalizer features decimal point 6 digit display.

PC-FR 1/8 DIN Process Counter/Totalizer comes with a front panel pushbutton. Unit is suitable for displaying AC line frequencies up to 250 V ac, RPM monitoring, speed detection of proximity switches and flow rate from turbine meter inputs down to 12 mV. Product offers RS-232, RS-485 and USB communication options and features optional 8 A contact or 120 mA solid state relay outputs. Totalizer’s...

Read More »
Fluke 729 Automatic Pressure Calibrator is Finalist in Control Engineering's Engineers' Choice Awards
Calibrators

Fluke 729 Automatic Pressure Calibrator is Finalist in Control Engineering's Engineers' Choice Awards

New pressure calibrator recognized for improving repeatability and simplifying the calibration process EVERETT, Wash., Oct. 31, 2017 - The Fluke® 729 Automatic Pressure Calibrator is a finalist in the Hardware - Handheld Test, Measurement, Calibration category of the Control Engineering 2018 Engineers' Choice Awards. The awards honor the best control, instrumentation, and automation products...

Read More »
NORTEC® 600D Inspection Kit can read tube probe signals.
Inspection Equipment

NORTEC® 600D Inspection Kit can read tube probe signals.

Used for detecting corrosion, pitting, cracks, wear and erosion in HVAC, feedwater heaters, condensers and evaporators, NORTEC® 600D Heat Exchanger Inspection Kit is equipped with 600D flaw detector. Kit consists of adaptors for eddy current probes (ECT), remote field (RFT) probes, and near field (NFT) probes. Enabling single user to inspect ferrous, non-ferrous, finned and un-finned tubing,...

Read More »

All Topics