New Electrical Equipment & Systems Products

Rack Case comes in 19 in. EMC screened version.

Designed to accommodate electronic, electric, and electro-mechanical equipment, Veroshield Rack Case comes in 3 sizes: 1U high x 10.4 in. deep, 2U high x 14.4 in. deep, and 3U high x 14.4 in. deep. Typical attenuation figures are in excess of 110 dB up to 10 MHz, falling linearly to 40 dB at 1 GHz. Constructed from 0.9 mm zinc-plated steel, case maintains electrical conductivity throughout....

Hydraulic Hose Sleeve features ultra-tight, 6-weave construction.

Guardian(TM) hose sleeve protects equipment operators from potential injuries that could result from hose failures. Featuring polyamide 6-weave construction, sleeve restrains hose bursts at pressures up to 16,000 psi, deflects 1 mm pinhole leaks at 4,000 psi, and supports up to 250,000 abrasion cycles. It is compatible with most chemicals associated with fluid-conveyance applications and meets...

Safety Relay enhances plant machinery reliability.

Designed for OEMs, ESR5 monitors signals from safety devices and switches off quickly if emergency occurs to enhance plant machinery reliability and safety. It detects faults - ground, cross connection, wire breakage - that occur in control circuit and switches off enable paths. Available in single- and dual-channel versions, relay employs redundant features and is compatible with various safety...

Wireless Process Transmitter UWPC-2-NEMA

Omega's new wireless process transmitter for sensors with voltage or current output converts process signal to wireless up to 120 m (400'). It accepts 0 to 1V, 0 to 5V, 0 to 10V and 4 to 20 mA signals. Free software for monitoring, recording, and data logging is included. This product features low power operation/sleep mode for long battery life and works with Omega's UWTC-REC family of wireless...

TOP 3 SEAL TROUBLE SIGNS and HOW TO FIX IT

If ignored, broken seals can lead to a loss in production and equipment shut down. For more information on seals and seal repairs, download now.

Featuring GE's Advanced Combined-Cycle Technology, New Power Plant is Inaugurated in Western France

o GDF SUEZ's Montoir de Bretagne Facility Producing 435 Megawatts of Electricity o Project Marks First Application of GE's 9FB Gas Turbine in France o Gas-Fired Plant Offers Reliable, Efficient and Flexible Power MONTOIR-DE-BRETAGNE, FRANCE- Based on advanced technology from GE (NYSE: GE), a new combined-cycle power plant at Montoir de Bretagne in the Loire Atlantique region of western France was...

Essemtec to Present Innovations at SMT Nuremberg 2011

Essemtec, the Swiss manufacturer of production systems for electronics, will present several innovations in Hall 7, at booth 203 during the upcoming SMT/Hybrid/Packaging 2011 exhibition in Nuremberg, Germany. One of these advancements is the new Cobra Feeder, which allows four components to be picked up simultaneously. The new double-8-mm feeder from Essemtec is so precise that a Cobra placement...

ONPATH and Simena Partner to Offer the Industry's Most Complete Layer 1 through Layer 4 Solution for High Performance Monitoring

Packet Flow Switch expands UCS suite, offering the lowest latency aggregation and monitoring switch on the market MARLTON, N.J. -- ONPATH Technologies, the leader in scalable connectivity and monitoring solutions for high performance networks, and Simena, LLC, the innovative leader in network monitoring and testing solutions, today announced a strategic partnership to add the industry's lowest...

On-line/Off-line Switch is offered in 3 versions.

Model 7340 RJ45 CAT 5e On-Line/Off-Line Switch Series uses on-line switch position to connect port A to port B and off-line switch position to disconnect and isolate port A from port B. Device accepts dry contact open/close logic to control switch position. Model 7340A also accepts dry contact open/close logic to control switch position, and also provides contacts for switch position feedback....

SIL-Rated Relays are designed for process safety.

Designed to operate with fail-safe controls in process applications, PSR-FSP2/2x1 and PSR-FSP/2x1, respectively, support use in situations requiring up to Safety Integrity Level (SIL) 3 and SIL 2. Both safe interposing relays have 2 NO safe outputs, but only those for PSR-FSP/2x1 are internally redundant. Also, NC status contact on both 17.5 mm wide safety process relays can be wired to SIL-rated...

Programmable DC Power Supply incorporates energy saving features.

Sorensen XG 1500 Series 1500 W DC power supply features user-selectable input ranges of 0-2 V to 0-10 V, programmable input resistance of 2-10 kΩ, and 8-600 V output. Front panel control lets user program output voltages and currents, turn on/off auxiliary outputs, and turn on/off main supply outputs. Green features include sleep mode for reduced power consumption and noise, along with variable...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.