New Electrical Equipment & Systems Products

Aerospace Circuit Breaker handles currents up to 50 A.

Weighing 60 g, single-pole Model 4140 is intended for 115 V or 28 Vdc applications from 20-50 A. Temperature-compensated unit offers operating temperature of -67 to 257Ã-

Stepper Motor Driver IC suits automotive applications.

Model A3980 features fault diagnostics and reporting and has integrated DMOS outputs, which are protected against short-to-battery and short-to-ground. STEP and DIRECTION interface allows for up to 1/16th microstepping without complex system controller. Output drivers operate between 7-35 V and will typically run up to 1 A of output current. Offered over junction temperature range of -40 to...

Power Conversion IC comes in 2 x 1 mm package.

Operating at 3 MHz fixed frequency, TPS62300 step-down, 500 mA dc/dc converter extends battery life in space-constrained applications. Synchronous, switch-mode, power management IC with integrated FETs delivers 93% power conversion efficiency and -0.5 to 1.3% voltage regulation accuracy. Series TPS6107x synchronous switch, 600 mA, dc/dc boost converters support input voltages of 0.9-5.5 V and...

Shielded Cable and Patch Kits deliver shielded connectivity.

ClarityÃ-® Shielded Solutions provide Category 6 and 5e performance with added protection from EMI, RFI, and alien cross-talk, external noise sources that can negatively affect channel performance. This 4-pair shielded connectivity system includes TracJackÃ-® workstation modules, patch cords, and patch panel kits. Products exceed ISO/IEC 11801 and EN50173 second edition requirements for...

Pressure Sensor Selection Guide

This white paper provides information and a guideline for pressure sensor selection.

Cable Assemblies feature no attenuation from 0.5-18 GHz.

Utilizing lightweight coaxial cables, Zero dB(TM) Assemblies are intended for fighter aircraft, helicoper, transport aircraft, and UAV platforms.

DC Servomotor offers 280 oz-in. peak torque.

Accepting 12 Vdc, Model MMP-C21.230B-12V measures 2.14 in. dia x 4.8 in. long and has dual output shafts of 0.375 in. dia. Mounting is accomplished with 4 face mount, No. 6-32 threaded holes, equally spaced on 1.531 in. dia BC. Rated for 40 oz-in. of continuous torque at 2,500 rpm, motor requires just 7.5 A at 12 Vdc to generate full load output torque. Optical encoders, failsafe brakes, analog...

AC/DC Welder offers 250 A output.

Ranger(TM) GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects KohlerÃ-® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and...

Piezo Inverter suits multi-lamp backlit displays.

With Piezo Inverter, each lamp in multiple lamp systems operates independently in event of single or multiple lamp failure. By using balanced output configuration, dimming ratios of greater than 500:1 are achievable. Control circuitry and low voltage power supply can be remotely mounted allowing thermal management of display. Optical feedback provides uniform lamp output and can compensate for...

SMT Battery Connectors have low-profile design.

Designed for mobile applications, 9155 Series connectors feature contact beam static height of 2.45 mm. Initial product is available in 3 contact positions and spaced on 2.5 mm centers. Once fully deflected, compressed height reduces to 1.3 mm above board. All gold-plated contacts, stamped and rated to 3 A, have beryllium copper base material and stable contact beam design. Integral end stop aids...

DC/DC Converter features 15 x 15 mm power LED driver.

Requiring no external components, FX5959G701ADJ features fully integrated constant current source module that ensures full load life of LEDs without exceeding applicable LED voltage. It drives power LEDs rated for operation at or above 300 mA by being connected with LED and low voltage source. Measuring 0.59 x 0.59 x 0.126 in., product incorporates 20 components and dc/dc converter in one BGA...

5 and 13 Micron Resolve Columns with Greater Bed Stability

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.