Electrical Equipment & Systems

Terminal Block System combines 4 connection technologies.

Terminal Block System combines 4 connection technologies.

CLIPLINE Complete terminal blocks are offered with screw clamp, spring-cage, auto-spring, and insulation displacement connectors to provide proper connection in any application. All connection systems work with one another via dual bridge system, which accepts same push-in jumpers and accessories. Flexible bridge system enables chain, step-down, and skip bridging. Product also incorporates...

Read More »
Integrated e-Field Sensing Chip offers 12-channel capacity.

Integrated e-Field Sensing Chip offers 12-channel capacity.

Designed for sensing presence or absence of motion, Model AD7103 40-pin ASIC achieves 16-bit resolution, which enables measurement down to 4 af/rtHz. Configuration features 3 discreet channels with 4 selectable inputs, allowing for 12 independent inputs. In full operational mode, device typically consumes 8.5 mA from 2.6-5.5V power supply. Single chip capacitive sensor includes onboard...

Read More »

IP Phone Chip eliminates network bottlenecks.

Internet Protocol phone chip, Model BCM1103 integrates 10/100/1000 Mbps Gigabit Ethernet switch and two 10/100 Mbps Fast Ethernet transceivers. BroadSAFE(TM) technology enables secure transmission of voice packets, while hardware security module performs voice encryption and authentication. Identifier embedded in each chip is virtually impossible to decode, hack, or steal. RISC processor and DSP...

Read More »
DC/DC Converter optimizes battery run-time.

DC/DC Converter optimizes battery run-time.

Housed in 4 x 3 mm DFN package, buck-boost Model LTC3442 delivers continuous 1.2 A of output current at efficiencies as high as 95%. Synchronous, fixed-frequency unit operates from input voltage of 2.4-5.5 V and can provide fixed output voltage between 2.4-5.25 V. Programmable switching frequency can be set between 300 kHz and 2 MHz via single resistor, and Burst ModeÂ-® operation can be...

Read More »

UTP Cabling System supports 10 gigabit Ethernet service.

Belden IBDN System 10GX provides users with end-to-end UTP cabling solution for 10 gigabit Ethernet service with frequencies up to 625 MHz. Copper-based product provides seamless upward migration path from existing 100Base-T and 1000Base-T cable plants. It is built around enabling technologies such as SpiralFleX(TM) cable design, MatriX IDC(TM) design and patch panel circuit layout, X-Bar(TM)...

Read More »
Shielded Motor Cable suits automated servo systems.

Shielded Motor Cable suits automated servo systems.

Designed for ac interconnection of variable frequency control devices to ac variable frequency motors, VFD Lean TR has flame-retardant PVC jacket that is sunlight and oil resistant. VFD tray cable, rated for 600 V applications, is UL and CSA AWM approved for 1,000 V control and instrumentation cable. In addition to being 100% shielded from interference, foil and braid shield reduces problems...

Read More »

POL Converters fit in densely packed boards.

Vertical-mount Model SIL30E features single-in-line package with footprint of 2.0 x 0.31 x 0.5 in., while surface-mount Model SMT30E measures 1.3 x 0.53 x 0.32 in. Both 30 A non-isolated, point-of-load converters feature input voltage of 8-14 V and accommodate output voltages from 0.8-3.63 V. Suited for optical switches and network routers, units offer remote sense and remote on/off facilities....

Read More »
Universal Adapter Kits suit WiFi and broadband systems.

Universal Adapter Kits suit WiFi and broadband systems.

Models RFA-4018-WIFI and RFA-4028-WIFI contain assortment of 30 universal adapters, which include male and female MMCX, N, reverse polarity TNC, reverse polarity SMA, N, TNC, BNC, and SMA connector interfaces. By joining 2 adapters using universal center, coaxial adapters can be made with any combination of interfaces. All adapters feature TeflonÂ-® insulation, silver-plated machined brass...

Read More »

Structured ASIC Solution has fine-grained architecture.

Manufactured on TSMC's 90 nm process, HardCopyÂ-® II devices feature FPGA front-end design methodology. Interface circuitry supports external memory at 233 MHz for SDRAM and 250 MHz for RLDRAM II. Devices deliver up to 2.2 million ASIC gates, 8.8 million bits of RAM, and over 350 MHz system performance. They support 1 Gbps differential I/O as well as high-speed interfaces such as 10-Gigabit...

Read More »

FTP Cabling System offers 10GBASE-T support.

NetClearÂ-® GTS Category 6 FTP cabling system provides 10 Gigabit Ethernet support and has no limitations on channel length, patch cord length, or patch cord configurations within standards-compliant channel configurations. Product combines Berk-Tek GuardmarkÂ-®-6 FTP cable and Ortronics ClarityÂ-® 6 shielded connectivity to provide over 22 Gbps channel capacity. Shielding virtually...

Read More »

All Topics