Hardinge Supplies a Precision Grip for Medical Component Manufacturing
Hardinge, well known in the industry for their SUPER-PRECISIONÃ-® products, provides gripping solutions for machining small diameter parts for medical component manufacturing. One category of products includes Swiss-type headstock collets, pickoff collets, carbide guide bushings, bar loader collets and custom manufactured solutions for Swiss turning. Their Swiss-type collets are finish ground...
Read More »
Door Interlock Switch targets commercial applications.
Featuring custom internal solenoid control, Relialign™ CDI Series holds swing door in place and prevents it from being opened when not desired. Door-closure retention cam contributes to safety and reduction of nuisance stoppages, while lack of open or exposed contacts minimizes possibility of owners making manual adjustments. Compliant with ASME A17.1/18.1 and cULus, switch includes manual...
Read More »
Equipment from Clean Room Devices Permits High-Speed Assembly of Medalist-® Medical TPE Tubing and Tapered-Barb Fittings
Automatic System Demonstrated at MD&M West Yields a Stronger Fit between TPE Tubing and Connectors than Is Achieved with Solvent Bonding of PVC Tubing ANAHEIM, CA, U.S.A - An automatic fitting inserter developed by Clean Room Devices, LLC enables medical product manufacturers to obtain the advantages of MedalistÃ-® elastomers over PVC while increasing productivity in the assembly of tubing...
Read More »
Brushless DC Motors provide range of power capabilities.
Along with integrated electronics, DCmind TNi21 and SMi21 Series feature optimized control loop, internal thermal protection, and intuitive software. DCmind SMi21 Series,Ã- which incorporates 4096 step encoder, offers nominal usable power ratings of 66, 90, and 150 W at 24 Vdc and support 9–56 Vdc. DCmind TNi21 Series offers nominal usable power rating of 60, 80, and 140 W at 24 Vdc and...
Read More »
Energy Storage: The Solutions to Power Your Project
Essentra has the technology and expertise to guide you to the perfect energy storage solution. Download our energy storage guide to discover which solution is right for your application.
Read More »Portable GFCIs offer automatic and manual reset models.
Available in 15 or 20 A models, Portable GFCIs include 5 models:Ã- Right-AngleÃ- Plug, In-Line, Cord Set, Adapter Plug, and Box Unit. All models meet requirements of UL GFCI, NECÃ-®, and OSHA 1926.404 standards. Housed in polycarbonate, GFCIs withstand impact and extensive usage in variety of applications, including power tools, high-pressure power washers, wet vacuums, and...
Read More »DC/DC Converters are produced to ISO 9001 standards.
Comprised of 3 W DC/DC converters with 1,500 Vdc I/O isolation, MDWI03 Series offers 4:1 input ranges of 9–36 Vdc or 18–75 Vdc. Input filtering complies to EN55022 Class A and FCC Level A, eliminating need for external filtering. Efficiency is rated up to 80%, and regulated outputs are available in single 3.3–24 Vdc or dual Ã-
Read More »
Miniature DC-DC Converters offer 5.2 kV isolation.
Supplied in SIP format, fully encapsulated MEJ2 series includesÃ- through-hole, 2 W DC/DC converters available with single or dual outputs that cover nominal voltages of 3.3, 5, 9, 12, or 15 Vdc. Input voltage variants accommodate 3.3, 5, 12, or 15 Vdc. Converters are recognized to UL60950 for basic/supplementary insulation for voltages up to 200 Vrms. With internal physical spacings...
Read More »Power Management Unit features 10 mS start-up time.
Optimized to work with TI's automotive OMAP™ processors, Model TPS659119-Q1 targets instant-on applications such as automotive infotainment systems. IC features 3 step-down DC/DC converters, 2 with dynamic voltage scaling and 1 for I/O power. Control signal enables one external buck controller for external FETs to support high current rail when necessary. With 8 LDO voltage regulators and 1...
Read More »
AC/DC Power Supplies provide 300 W with convection cooling.
Measuring 3.31 x 7.01 x 1.45 in., single-output ZWS300BAF Series features convection cooling, eliminating acoustic noise and vibration as well as need for fan maintenance. Units operate from universal input of 85–264 Vac, 47–63 Hz, with PFC and are available with output voltage of 24, 36, or 48 Vdc, all of which have Ã-
Read More »
Manncorp to Unveil New Stencil Printer and Vapor Phase System at IPC APEX Expo 2013
Electronic manufacturing equipment provider Manncorp will be unveiling several all-new products at IPC APEX Expo Booth #118 in San Diego, California, February 19-21. Among the new products will be a compact, touchscreen-controlledÃ- vapor phase soldering systemÃ- designed for the most complex, temperature-sensitive soldering and conductive adhesive curing applications.Ã- The...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
