New Electrical Equipment & Systems Products

Gas Plasma Arresters suit broadband applications.

Lead-free and RoHS-compliant, Greentube(TM) Series SL0902 offers alternative to silicon surge protectors when high bandwidth and low capacitance are required. Products combine low insertion loss, no capacitance variation with voltage and temperature, and voltage clamping to prevent surge damage while maintaining data integrity. Units can be accommodated on D0-214AA solder pads.

Enclosures are designed for instrumentation packaging.

Available in corrosion-resistant polycarbonate or ABS plastic, Cardmaster 3 enclosures provide 2 separate compartments: one for circuit boards and sensors with built-in card guide slots, and another for terminals and wiring. Outside dimensions range from 6.5 x 6.3 in. to 14.3 x 12.4 in. with depths from 3.1-6.4 in. Rated to NEMA 4X and IP65, products are available with quick release thumb latch,...

Switch-Mode Power Supply comes in 1U-high package.

With operating efficiencies to 92%, AAD600S provides single, isolated (floating) output of up to 600 W continuous power and corrects input current waveform to better than 99% power factor at full rated load. User may select any of factory-set output voltages/currents, including 12 V/42 A, 15 V/36 A, 24 V/22 A, 28 V/20 A, 36 V/16 A, and 48 V/12.5 A. Features include remote sense, remote On/Off,...

Washdown Motors feature stainless steel components.

Available from Ã-½-2 hp, Super-EÃ-® Motors are impervious to rust and deterioration caused by frequent high-pressure caustic sanitizing in food processing and pharmaceutical plants. Encapsulated windings and conduit box lead entry hole, utilizing E3 Effusion Epoxy Encapsulation(TM) process, stop moisture from reaching windings. Hydrophobic aspiration system prevents condensation moisture...

Pressure Sensor Selection Guide

This white paper provides information and a guideline for pressure sensor selection.

Switching Power Supplies suit networking applications.

At 6.7 W/cu-in., Series LPS120 delivers up to 130 W of total power with single outputs of 3.3, 12, 15, 24, and 48 V. Featuring active power factor correction to minimize input harmonic distortion, 85-264 Vac power supplies operate from 0-50Ã-

Terminal Blocks suit wire gauges up to 14 AWG.

Measuring 6.2 mm wide, quick connection IDC Series QTC 2.5 accepts 20-14 AWG conductors and offers current carrying capacity of 15 A at 600 V. When cable is inserted into contact, soft pivot is actuated and gas-tight, vibration-proof termination is made. Wiring installation requires only standard screwdriver.

Shielded Twisted Pair Cable suits Wi-Fi tower transmissions.

Compatible with any system that uses RJ-45 connectors, outdoor-rated, 4-pair 1300A Cable connects point-to-point and point-to-multipoint wireless LAN systems. It features .030 in. thick, UV-resistant PVC jacket with Beldfoil shield bonded to jacket's inner wall. Weather-resistant construction enables stable performance, even in high-traffic RF environments. Cable adheres to TIA/EIA 568-B.2...

COFDM Demodulator IC optimizes DVB-T reception quality.

Offered in QFN48 package with 7 x 7 mm footprint, Model DRX 3977D enables error-free reception in fringe areas or when using Single Frequency Networks. It includes IF amplifier and PLL that can reuse tuner clock without performance degradation. Unit exceeds, with several dB of margin, NorDig-Unified Specification v1.0.2. Small package size makes it suited for PC cards, ExpressCard(TM) designs,...

Termination Networks do not require impedance matching.

QDN Series, suited for high-speed memory buses, terminates load impedances and clamps high and low-state reflections as well as noise. Supporting up to 18 termination lines, QDN001 Series consists of 36 Schottky diodes in one package. With 17-channels, QDN002 Series ESD protection network provides 15 kV HBM and 8 kV ESD contact protection, and 18-Channel Series QDN003 Schottky diode termination...

Ethernet Switch features eight 10/100 Mbps ports.

Suited for critical applications in harsh environments, Model EDG-6528L features screw terminals to ensure that power lines are solidly fixed and cannot be accidentally pulled out. It can be mounted on DIN rails or walls, and has operating temperature of 0-70Ã-

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.