Electrical Equipment & Systems

Switches

Pushbutton Switches feature large ergonomic actuator.

AV Series metal pushbuttons, equipped with 30mm dia mushroom head button, can be operated by finger, fist or foot in harsh environmental conditions. They are front panel sealed to IP65 and can resist shocks up to 20 joules. Series consists of many switch configurations and choice of material, shape and marking options. With ratings up to 5A at 250Vac, they provide 50,000 cycles of electrical life.

Read More »
DC/DC Converters deliver output currents of 80 A.
Power Supplies

DC/DC Converters deliver output currents of 80 A.

Half-brick DC/DC converters are available in two versions: ALH80 open face and AEH80 with heat sink adapter plate attached. Both offer efficiencies of 87% while delivering 80A, and 88.5% at 60A. Input range is 36 to 75V, and output voltages are 1.2, 1.5, and 1.8 volts. Units feature ±10% output voltage trim adjustment capability; under voltage lockout with hysteresis; and over temperature,...

Read More »
Switches handle up to 3,000 A.
Switches

Switches handle up to 3,000 A.

Tap Switches are available with continuous/intermittent ratings from 100/150 to 2000/3000 A at 600 V for single-, 2- or 3-phase applications. Switches have low operating torque, high-pressure line contact, flame-retardant nontracking insulation, nonferrous parts and long-life contacts. Available in molded and fabricated-base designs, they can be configured for manual or motor operation....

Read More »
Motor-Driver Packages are available with size 34 motor.
Motors

Motor-Driver Packages are available with size 34 motor.

CSK Series features size 34, 2-phase, hybrid stepping motor and compact board level driver. Holding torque values vary from 305 oz-in. for CSK296-ATA to 916 oz-in. for CSK2913-ATA stepping motors. Driver packages produce drive currents of 4.0 and 4.5 A per phase. They include automatic current cutback function. Step angle select switch allows user to select full step (1.8°) or half step...

Read More »
Power Distribution Unit offers series mode technology.
Power Distribution Systems

Power Distribution Unit offers series mode technology.

Available as 19 in. rack mount or 17 in. modular, PDU features total of 10 outlets, 4 sequentially switched, 4 normally switched, and 2 always on. It includes switch selectable delay, power failure reset latch, remote control capabilities, and daisy chaining. Low voltage shut-down function will automatically shut down in opposite sequence of start-up if voltage drops below 95 V. 15 and 20 A...

Read More »
Electric Wire, Cable and Cable Assemblies

Cable interconnects inputs and outputs of AES3 devices.

D5526EZ dual pair, 110-ohm cable utilizes foam polypropylene dielectric for low attenuation, and tight-twist lay with foil shield for noise rejection. In addition to insulated conductors, D5526EZ has non-conductive polypropylene rod that stabilizes and maintains impedance as cable is flexed. Co-extruded zip type construction allows for easy breakout, connector termination and installation.

Read More »
Electrical Power Generators

Heat and Power Unit features Waukesha engine.

Plug and play CHPgen(TM) 375 modular, self-contained, natural-gas fired engine/generator system is capable of producing 375 kW of energy output with 88% total efficiency, while providing thermal energy in 205° hot water form. CHPgen Series of CHP units is available from 375 kW through 1400 kW of energy output. Features include on board heat recovery, remote monitoring and control, and air...

Read More »
Connectors and Adapters meet FCC Part 15 regulations.
Connectors

Connectors and Adapters meet FCC Part 15 regulations.

TNC males with reverse threads include RT-1202-C crimp connector for RG-58/U cable and RT-1227 reverse thread TNC male to reverse thread TNC female right angle adapter. Reverse thread SMA females include RT-1142 adapter with reverse threaded SMA female on one end and standard BNC female on other end. Nickel plated RT-1005-C reverse thread N male crimp connector is for RG-58/U and gold plated...

Read More »
Electrical Terminals

Heat Shrink Terminals provide environmental seal.

Heat Shrink Terminals increase mechanical and electrical connections by adhering connector and wire insulation. Adhesive seal provides harsh environment protection resisting rainwater, salt water, dust, chemical corrosion, acids, solvents, fuel, oil and abrasions. One-piece tin plated barrel with V groove provides maximum electrical conductivity, corrosion resistance, and excellent current flow.

Read More »

All Topics