New T-Slot Bus Bar Available in Electro-tin Plated Copper or Aluminum
Bar slot accommodates standard 1/2 inch bolts with hex, square and 1/4 turn heads. Listed to UL467 and recognized to UL486 A/B. Offered in single or double slot configurations.
Read More »
New 8500B Series of Programmable DC Loads Suits for Testing DC-DC Converters
Measures 0.1 mV / 0.1 mA of resolution for a 16-bit measurement system. Offers up to 10 kHz transient mode in Constant Current mode and supports flexible triggering options. Available in four models each in 2U (half-rack) form factor.
Read More »
New NetWay5B Switch Features Five 10/100/1000 Data Ports with Speed/Activity LED Indicators
Compact IP switch is designed to mount in virtually any Altronix enclosure. Reduces installation costs by eliminating the need and costs associated with running dedicated cables. Powered via PoE or any 12 or 24VDC UL listed power source.
Read More »
Zeus Expands Portfolio with New Polyimide Family of Products
Products Include PI Tubing, PI Coated Wire, PI Glide™ Tubing, and PI Glide™ Coated Wire Orangeburg, S.C., June 11, 2019 /CNW/ -- Zeus Industrial Products, Inc. (Zeus), a leading polymer solutions provider and material science innovator, has announced the introduction of a new polyimide (PI) family of products. The new additions include tubing and coated wire containing polyimide and PI...
Read More »
Does an IT MSP Really Add Value to a Manufacturing Environment?
To find out more about how IT managed service providers can specifically help your manufacturing company, download now.
Read More »
Congatec Releases Conga-TC370 COM Processor Supports Up to 4096x2304 pixels and 1x Gigabit Ethernet
Embedded with 3.5 inch SBCs and conga-IC370 Thin Mini-ITX motherboards. The platform consists of two DDR4 SODIMM sockets with 2400 MT/s of up to 64GB. Supports USB 3.1 Gen2 with transfer rates of 10 Gbps and 1x DisplayPort++ via a USB-C connector.
Read More »
Applied Motion Products Launches Frame Integrated Motors Which is Available in 60mm Size with Larger Shaft
Available in two models SWW24IP-3DE Integrated stepper motor and TXM24IP-IDG StepSERVO. Features include I/O, configuration, polling, math, register manipulation, and Q programming and 130 registers for controlling motion. Provides greater acceleration, increased efficiency, increased accuracy with reduced motor heating and noise.
Read More »
New LNP-0800-60-24 Series Features 4*10/100Tx 4PPoE Type 3 Ports and 4*10/100Tx PoE+
Ports 1-4 support an IEEE 802.3bt Type 3 high power 4PPoE output up to 60W per port and ports 5-8 support an IEEE 802.3at PoE+ output up to 30W per port. Non-management features allow for quick deployment almost anywhere on the network. IP30 rated and DIN-rail mountable series ideal for expanding the network on the outer edge.
Read More »
New Power Packs from SIFCO ASC is Portable for Use on the Shop Floor
Features 100-250V single phase dual input voltage, switch mode technology and pole changer. Unit turns off immediately when output power becomes overloaded. Detachable and adjustable control panel can be positioned up to nine feet away from unit.
Read More »
TDK Corporation Launches TDK-Lambda i6A4W Family Certified From UL/CSA 60950-1 and IEC/EN 60950-1
Capable of operating input voltage of up to 9 to 53V and output voltage that is adjustable from 3.3V to 15V or 3.3V to 40V. Provide an output voltage adjustment pin, positive or negative logic remote on-off, remote sense, input under-voltage, over-current and thermal protection. Features efficiency up to 97.5% and maximum output power of 250W.
Read More »
New KDSClick Allows Feeding Open-Ended Cables and Pre-Assembled Cables into Enclosures
Based on three basic components: frames, inlays and seals. Features one-piece plastic frame in four sizes for 4, 6, 8 or 10 seals. Ensures DIN EN 62444 compliant strain relief for cables.
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
