Polarized IEC Inlets suit protection class II appliances.
Rated 2.5 A at 250 Vac, consistent with IEC standard, Series 2577 and 2579 are designed to polarize line contact of power mains into appliance. Inlets offer solid pin construction versus folded pins, ensuring high degree of contact integrity. Series 2577 is designed for screw-on mounting, while Series 2579 accommodates snap-in mounting, 1.0/1.5/2.0/2.5/3.0 mm. Both are configurable with solder,...
Read More »
ATR Format Enclosures have conduction-cooled design.
Available for both OpenVPX and MicroTCA architectures, conduction-cooledÃ- ATR format chassis comes in Ã-½ andÃ- Ã-¾ sizes for 3U or 6U boards. Options are also available for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461, products are also available with power interface boards forÃ- incorporating...
Read More »
Power Distribution Boxes eliminate voltage drop in field.
Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output...
Read More »
Multiprocessor drives data-intensive DSP application performance.
Rugged 6U OpenVPX multiprocessor, IPN252, delivers up to 1.4 TeraflopsÃ- throughput and supports AXIS Advanced Multiprocessor Integrated Software environment. IntelÃ-® CoreÃ-® i7 CPU and 640-core NVIDIAÃ-® Maxwell GPU are connected viaÃ- 16-lane PCIeÃ-® Gen 3 switch, which also providesÃ- 16-lane PCIe Gen 3 port to VPX expansion plane, and 8-lane PCIe Gen 3 port...
Read More »
No Pencils Required: From Thinking to Knowing Through Mobility
This ebook provides a detailed guide on how mobility and digital data management systems (DDMS) can increase your company's overall effectiveness and efficiency.
Read More »
Enclosure Kits allow flexible transmitter mounting.
Offered in kits with hinged or flat cover, Signet 9900 Transmitter Rear Enclosures enable flexible mounting of Signet 9900-1P Transmitter onto pipes, walls, tanks, struts, at angles, or inside panels. Holes for wiring in any orientationÃ- can be drilled on any enclosure side for further flexibility, and room is provided to accommodate all accessory modules: 4–20 mA output, batch, relay,...
Read More »
Motion Control Chips offer direct upgrade paths.
Series PCD46x1A features single-axis (PCD4611A), dual-axis (PCD4621A), and quad-axis (PCD4641A) models. With respective QFPs of 48, 64, and 100 pins, chip package and terminal allocation of all three modelsÃ- are compatible with those of PCD46x1 series. Series PCD46x1A can also mount on same boards as previous chips. Functionality lets CPU connect to chips with 8-bit parallel bus connection...
Read More »Siemens to Provide Con Edison with Mobile Resilience Transformers
More compact, lighter and environmentally-friendly transformers allows Con Edison to reduce transformer replacement time from months to days. First transformer of its kind worldwide. Transformers for quick replacement in response to extreme weather and unexpected events. Siemens is providing Con Edison, the utility that powers New York City and local areas, with six mobile resilience transformers...
Read More »Curtiss-Wright Selected by Torc Robotics to Provide Rugged Small Form Factor Ethernet Switch for Unmanned Ground Vehicle
Parvus DuraNET 20-10 GbE switch enables high bandwidth on-board UGV network Ã- AUVSI XPONENTIAL 2016 (BOOTH #873), NEW ORLEANS, La. – Curtiss-Wright’s Defense Solutions division today announced that it was selected by TORC Robotics to provide its small form factor (SFF) rugged COTS Gigabit Ethernet (GbE) switch subsystem for use in autonomous tele-operated unmanned ground vehicles...
Read More »
ABB Gas-Insulated Switchgear Receives OSHA's NRTL Listing
Dallas, Texas,Ã- – ABB answers the industry call for NRTL listing on ZX2 Medium Voltage Gas-Insulated Switchgear. As part of its continuously growing product offering, ABB, the leading power and automation technology company, received authorization to apply the ETL label to operating voltages up to and including 52 kV for all ZX2 builds. Since the listing process under third-party review,...
Read More »Cryptography-Enabled 32-bit MCU adds security to IoT devices.
Supplied in 144-WFBGA package, CEC1302 (Part No. CEC1302D-SZ-C0) allows for pre-boot authentication of system firmware to ensureÃ- it is untouched and uncorrupted. ThisÃ- preventsÃ- such attacks as man-in-the-middle, denial-of-service, and backdoor vulnerabilities. Also, MCU can be used to authenticate any firmware updates and therebyÃ- protect system from malware or memory...
Read More »
DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology
The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.
Read More »
