Electrical Equipment & Systems

Computer Hardware & Peripherals, Electrical Equipment & Systems

DC-to-DC Conversion Board suits PC/104-based computers.

Feb 06, 2002

Power Vx 90-watt power conversion board is designed with intelligent power management features. It offers greater than 90% efficiency, input voltage range of 9-60 V, 12-bit external input voltage monitoring, local temperature monitoring and reverse polarity protection on input. Manufactured in compliance with PC/104 form factor requirements, Power Vx supports +/-5 Vdc and +/-12 Vdc, and is... Read More

Electrical Equipment & Systems

Category 6 Cable exceeds industry standard.

Feb 06, 2002

NetClearGT3 combines LANmark-2000 cable and cordage with Ortronics Clarity6 components. Combination delivers channel performance 3dB above Telecommunications Industry Association (TIA) Category 6 draft 10 standard. It provides mated connector and cable balance to minimize impact of media change on transmitted signal; higher signal to noise ratio for 3.0 Gb/s channel capacity; and connector... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Power and Computing Platforms meet OEM requirements.

Feb 05, 2002

FUZION integrated power and computing platforms offer scalable open standards-based solutions for telecom, network, broadcast, CTI and medical/industrial sectors. eFUZION range offers 1U, 2U, 4U and 8U platforms comprising both ISA/PCI and CompactPCI architectures. nFUZION line is available in 4U and 8U CompactPCI versions and meets stringent space requirements. pFUZION includes On-Line Rack UPS,... Read More

Electrical Equipment & Systems, Safety & Security Equipment

Signal Beacons come with protective housings.

Feb 05, 2002

WERMA Signaltechnik Series 815 beacons and Series 109 and 110 audible elements have single-, double-, and triple- element, surface-mount housings that provide protection rating of IP 65. Housings are suitable for use as closed, portable units or as fixed wall-mounted units. Quick-mount capability of housing makes for rapid interchanging of components, allowing for variety of possible combinations. Read More

Electrical Equipment & Systems

Power System delivers 10,000 A.

Feb 05, 2002

Hyperon network power management system provides 10,800 A at 48 Vdc for central office switch environments, data centers, POP sites, and Mobile Telephone Switching Office (MTSO) applications. Compact system provides distribution and cable management. Read More

Electrical Equipment & Systems, Sensors Monitors & Transducers

Level/Flow Switches have intrinsically safe design.

Feb 05, 2002

With 2-wire 4-20mA loop power electronics, NuTec(TM) LS2000 insertion level switch is designed for service in nearly all fluid wet/dry applications. Level accuracy is 1/8 in. from flow element centerline. Unit can be top or side-mounted. FS2000L in-line flow switch/monitor is designed for high purity and sanitary environments. It features setpoint range of 0 to 300 SFPS in air and 0 to 10 FPS in... Read More

Electrical Equipment & Systems

Overload Relays have ranges from 0.1 to 630 Amp.

Feb 04, 2002

Solid-state Sirius 3RB10 relays are self-powered with integrated current transformers. They are available in class 10 or 20 trip class with manual/automatic reset or manual reset only. Relays have 4:1 ratio on current setting, enabling one device to cover wide range of currents. They also include phase-loss protection, tripping within 3 seconds upon detection of phase loss. There is no power loss... Read More

Electrical Equipment & Systems

E-Rated Fuses handle up to 63,000 A.

Feb 04, 2002

For transformer and feeder protection, CL-14 fuses meet requirements of ANSI C37.46 and C37.40. Fuses are available in clip-lock and bolt-in style, in single, double, and triple barrel versions. Filament wound, glass epoxy fuse tube provides UV and moisture protection, making fuses suitable for indoor and certain outdoor applications. Model ECL055 interrupts fault currents up to 63,000A, while... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Toroidal Isolation Transformers work in medical equipment.

Feb 01, 2002

AW Series is recognized under one or both UL544 and IEC601-1 safety standards. Power ratings range from l00VA to 3000VA, 50/60Hz. Applications include image processing, analytical instrumentation, ultrasound imaging, power conditioners, heart rate, APEA and 02/CO2 monitors, and ECG analyzers. Toroidal transformers are 30-50% lighter and have lower output impedance than stacked laminated... Read More

Electrical Equipment & Systems

DC-AC Inverter powers LCDs backlit by single CCFL.

Feb 01, 2002

8D Class inverter is 8 mm high and has on-board PWM dimming with analog control, up to 5 watts of output power, and integrated input and output connectors. Operating temperature range is 0 to +70 deg C. Mating locking input and output wiring harnesses are also available. Applications include monitoring devices, industrial process and control equipment, and point-of-sale displays. Read More

Electrical Equipment & Systems

Batteries have Absorbent Glass Mat (AGM) technology.

Feb 01, 2002

PowerSafe G family reformulated, sealed, lead-calcium, 6 and 12 V rechargeable batteries are designed with gas recombination technology. They utilize high purity lead and electrolyte. They also offer minimal gas evolution and sealed, spill-proof construction. PowerSafe GA is available in 8 models from 9.5 to 92 Ah. PowerSafe GAX is available in 4 models from 65 to 125 Wpc (Watts per cell).... Read More

Electrical Equipment & Systems

Fluorescent Light Fixtures have low profile.

Feb 01, 2002

Low profile LoPro indirect and semi-indirect die-formed steel fluorescent luminaries are suitable for lobbies, general office spaces, commercial establishments, and public building interiors. Minimalistic appearance is clean and simple, complementing scheme of most interiors. Fixtures are available in 8 colors, including white, gray, black and 5 pastel shades. Sections in 4, 8, and 12 ft segments... Read More

Electrical Equipment & Systems

M12 Field-Wired Connector allows tool-less installation.

Jan 31, 2002

Insulation Avoidance Connector (IAC) has pin-shaped contact that is forced into end of conductor. Pin makes contact with stranded wires of conductor, without removing insulation. Connections are rated for 4 Amps of current. Elastic material of insert ensures proper connection and provides gas-tight and vibration-resistant connector. 4- and 5-pin versions are available, for use with 20 to 26 AWG... Read More

Electrical Equipment & Systems

Power Tap provides power access from lighting poles.

Jan 31, 2002

Brad Harrison Luminaire Power Tap offers auxiliary AC power source for applications such as outdoor signage, RF radios or traffic monitoring cameras. To ensure optimal positioning of UV pole-top light sensor and to dress out cable neatly, receptacle can rotate full 350 deg. Tap features non-fretting electrical contact material and is rated for 600V outdoor usage. Read More

Electrical Equipment & Systems, Test & Measuring Instruments

Safety System protects operators from electrical shock.

Jan 30, 2002

SmartGFI is able to recognize configuration of Device Under Test and automatically enable or disable GFI circuit accordingly. Circuit will shut down high voltage if leakage in excess of 450 microA is detected through grounding circuit. It disables high voltage in less than 1 ms. GFI circuit does not need to be manipulated by operator of instrument and therefore risk of operator error is... Read More

Electrical Equipment & Systems

Connector System works with 230V/16A AC systems.

Jan 29, 2002

HARAX(R) detachable insulation displacement connector system provides quick termination by removing cable insulation; inserting individual, non-stripped wires; and tightening screw cap with no special tools. Gas-tight connection qualifies for IP67 rating. HARAX series provides termination components for panel feed-throughs, M8 and M12 connectors, and passive sensor/actuator boxes. Read More

Electrical Equipment & Systems

Programmable Limit Switch offers .088 deg repeatability.

Jan 29, 2002

Compact multifunction PLS 1000 provides direct remote control of timing and dwell settings in applications that require events to occur in specific sequence. Microcomputer-based switch has brushless resolvers for absolute position feedback, 8 inputs and 16 programable high power outputs. Ten independent programs can be stored, changed, and initiated via splash-proof tactile keyboard, or RS232C... Read More

Electrical Equipment & Systems, Portable Tools

Wire Stripper has Santoprene(R) grip.

Jan 29, 2002

Kinetic Super wire stripper offers Thumb-Valley Finger Guide and cushioned, textured grip, which cradles users' hands, helps to prevent Rivet Rash, and concentrates kinetic energy to push zone. Stripper also incorporates Pocket-Locket Locking Hasp for safe handling and storage. Wire stripper has steel blades, stripping holes, and handle shafts. Stripper's Shear-Cut bolt cutting capability will... Read More

Electrical Equipment & Systems

Reed Relay has >10E+14 ohms insulation resistance.

Jan 29, 2002

Low-profile CR-Series leadless 50 Ohm reed relay switches at speeds up to 6 GHz with less than 40 ps rise times. To eliminate potential packaging stress, it is made with ceramic case that matches thermal coefficient of expansion of reed switch glass and reed lead. Capable of withstanding reflow soldering operations up to 260 deg C, it uses no internal solder, and has 1 microV typical thermal... Read More

Electrical Equipment & Systems

Flooded Battery provides backup power.

Jan 29, 2002

LCT II-1700 standby battery has floating epoxy post seal and solid copper posts to improve short duration rates of less than 5 hr. Applications include central office, Internet backup, data centers, outside plant, and wireless. Read More