BLDC Full-Bridge Motor Driver integrates Hall commutation.
Capable of full functionality down to 1.8 V VDD, A1448 is designed to drive low-voltage, brushless DC vibration motors in portable devices. Singular input control allows for direct input PWM for speed control, can initiate active braking function, and acts as enable pin to engage micro-power sleep mode. Hall sensor, used to detect rotational position of alternating-pole ring magnet, achieves...
Read More »Rollable Solar Chargers target portable electronics devices.
Rollable solar chargers are suited for devices such as cell phones, laptops, and GPS units as well as 12 V batteries. Available in 7, 14, 21, and 28 W versions, devices are manufactured with thin film on plastic solar technology and are encapsulated in water-resistant and UV-tolerant fluoropolymer coating. Each is equipped with 15 ft extension cord with O-ring battery terminal connector and 12 V...
Read More »
Unmanaged GbE Switch survives industrial environments.
Supplied in rigid IP30 slim type housing, IGS-1050A/1041GPA are unmanaged Ethernet switches that support 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) ports plus 1 x 1000Base-X SFP port. There are dual redundant dc power inputs at terminal block, and relay output can carry 1 A @ 24 Vdc. Operating from -40 to +70Ã-
Read More »MPHusky Cable Bus Achieves Superior Reliability to Bus Duct, Conduit & Wire and Other Power Distribution Systems
MPHusky engineers and manufactures Cable Bus Duct Systems that utilize continuous runs of cable from termination to termination, eliminating the need for potentially faulty splices found in non-segregated phase bus duct systems. Since MPHusky Cable Bus utilizes highly reliable outdoor rated cables, moisture and weather do not damage the system. In fact, the system is designed to allow air,...
Read More »
Choosing an Optimal Riot PPE Supplier: 5 Key Factors
This ebook provides 5 key factors to choosing an optimal riot PPE supplier.
Read More »
Backplane Connector provides 85 ohm differential impedance.
Designed to meet demands of server, storage, and data networking equipment, Impact(TM) 85 Ohm supports Intel's Quick Path Interconnect (QPIÃ-®) standard, PCIe 2.0/3.0, as well as any proprietary system design where 85 ohm differential impedance is desired. Design may be interchanged with Impact 100 Ohm signal module to accommodate system needs, as both are of same physical size, density,...
Read More »
Coaxial Cables feature Banana Peel construction.
Specifically designed for digital signal interconnect and cross-connect applications in telco central offices and data centers, DS-3 and DS-4 Series Cables come in 26 AWG, 735 A plenum-rated and 20 AWG, 734 A plenum-rated models, both in 3-count and 6-count configurations. Banana Peel cable construction eliminates outer jacket to achieve smaller outer diameter and optimize bend radius, while PVC...
Read More »
Control Boxes operate actuators remotely.
With CB Series, users can operate electric or pneumatic actuators from remote location. Units are available with lamp indication for feedback confirmation of actuator/valve position. Housed in chemical-resistant, weatherproof enclosure, control boxes feature double-insulated, black plastic switches with contact rating of 10 A at 125/250 Vac. Boxes can also provide local indication for level...
Read More »
Circular Connectors feature IP69K-sealed design.
Available in 1-, 7-, and 51-way contact designs with wire sizes from 0.25-50 mmÃ-², APD Series features bayonet mating and secondary contact locking. Units have copper alloy contacts with tin or gold plating and high-grade PBT housings. Rated to 70 A per contact, connectors meet all DIN 72585 requirements. Sealing capabilities make connectors suited for off-road vehicles, boats, industrial...
Read More »
Managed Ethernet Switch supports PoE operation.
Featuring 8 x 10/100TX PSE and 2 x Gigabit combo port, Model IPS-3082GC supports Ethernet Redundancy protocol, O-Ring, Open-Ring, O-RSTP, and RSTP/STP to protect critical applications from network interruptions or malfunctions. Unit provides recovery time of less than 10 ms over 250 units of connection. Suitable for DIN-rail or panel mounting, switch supports port trunking, IGMP snooping, RMON...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
