Electrical Equipment & Systems

IMPULSE's HiPIMS Power Supply feature remote control options.
Controls and Controllers

IMPULSE's HiPIMS Power Supply feature remote control options.

Offered in Single and Dual configurations, the IMPULSE’s HiPIMS Power Supply gives 2kW output. Ideally used in process development and RD applications, HiPIMS' dual configuration powers 2 independent sources of up to 2kW each. Units can be set for either “master” or “slave” mode to run 4kW into a single source. Using the Dual option, the DC bias option can be set. Power supply...

Read More »
Can Stack Linear Actuators offer max holding force of 50 N.
Motors

Can Stack Linear Actuators offer max holding force of 50 N.

Featuring 7.5° step angle that provides fine incremental movement, 20 mm Series 20DBM is suitable for electronic pipettes, medical and non-medical analyzers, XY stages, and valve actuators. Customizable linear stepper motors are powered by high-energy neodymium magnets, optimized electromagnetic circuit, and bearing preload design. RoHS compliant products are available in Captive and...

Read More »
TRUMPower's TPMS-700W ATX PC Power Supply feature overvoltage and overcurrent protection.
Power Supplies

TRUMPower's TPMS-700W ATX PC Power Supply feature overvoltage and overcurrent protection.

Medically approved,Â- TPMS- 700W ATX PC power supply complies with ATX12V standards and 80+ Bronze high efficiency. With the total output current at 50A, and DC voltage outputs and maximum loads of +3.3V/24A, +5V/30A, TPMS-700 comes with 20+4 pin ATX motherboard connector, 4-pin Molex and SATA power connectors. At full load, MTBF of the unit is >146K hours. Unit features low ripple...

Read More »
BEI Kimco's Brushless Motors Meet Centrifuge Requirements for Reliable, Quiet Operation
Motors

BEI Kimco's Brushless Motors Meet Centrifuge Requirements for Reliable, Quiet Operation

VISTA, Calif.,Oct. 4, 2016 - BEI Kimco has met the high performance motor requirements for laboratory centrifuge machines. Centrifuges are used in biology, chemistry and hospital labs to rapidly spin and separate liquid samples into layers for analysis. These machines have varying requirements in motor functionality and size, as well as speeds that can range from just a few thousand RPM to higher...

Read More »
Switches

Power Supply Distribution Switch separately controls 4 lines.

Enclosed inÂ- all-metal chassis that provides EMI/RFI shielding, Model 4423 lets user provide power to any or all of 4 outputs via internal power supply. On/Off rocker switch for each channel controls power output, and each of 4 DC supply voltage lines features protection via fuse: 15 A fuse for +60 Vdc power supply, 30 A fuse for +28 Vdc power supply, and 10...

Read More »
Cyanoacrylate Fuming Chamber safely develops latent fingerprints.
Environmental Chambers

Cyanoacrylate Fuming Chamber safely develops latent fingerprints.

Offered in 24, 30, 48, 60, and 72 in. models, Safefume™ safely develops latent fingerprints using ethyl cyanoacrylate (CNA) vapor in controlled environment. Tamper-resistant compartment helps maintain chain of custody, while Air Science Multiplex™ ductless filtration system as well as design and construction features protect personnel during use. Other features include automatic...

Read More »
All-In-One Driver/Dimmer supports LED fixtures.
Power Supplies

All-In-One Driver/Dimmer supports LED fixtures.

Compatible with LED lightbars, LED puck lights, and LED tape lights, SWITCHEX® combines in-wall LED dimmer switch and power supply into single unit that mounts into standard recessed single-gang electrical switch box. Unit accepts 120 Vac and converts it to 12 V (60 W max) or 24 V (100 W max) DC. SWITCHEX includes single pole pre-set dimmer with on/off push switch. Dimming is smooth and...

Read More »
Brushless Motors range in torque from 0.04 to 8.5 Nm.
Motors

Brushless Motors range in torque from 0.04 to 8.5 Nm.

With torque from 6–600 oz-in. and speeds from 40–4,500 rpm, 44 mm Series EC044A is available in range of lengths and windings to accommodate application requirements. Series EC042B, measuring 42 mm in diameter, delivers 9–1,200 oz-in. of torque and speeds from 40–4,500 rpm. Both are equipped with E30 encoder and PLG42S planetary gear. Stock gear ratios range from 4–100:1, with optional...

Read More »
Board to Board, Cable Connectors suit high frequency applications.
Electrical Connectors

Board to Board, Cable Connectors suit high frequency applications.

Supplied in sub-miniature packages, SMPM interconnects offer versatile connectivity options. Cable connectors, made from beryllium copper or brass with gold plating, are available in straight and right-angle configurations for 0.047 and 0.086 in. dia semi-rigid and conformable cables as well as RG-178 flexible coax. Also machined from brass and plated gold, PCB connectors are offered in multiple...

Read More »
Sealed Toggle Switch complies with MIL-DTL-3950G requirements.
Switches

Sealed Toggle Switch complies with MIL-DTL-3950G requirements.

Featuring toggle seal composed of dynamic silicone material that bonds to metal toggle, pin, and bushing, ST-Series is protected against environment, vibration, and shock, while withstanding extreme temperature variations. Switch also utilizes up to 3 terminal seals per pole, and optional O-ring assures additional under panel sealing protection. With IP68 rating and IEC 60529 compliance, switch...

Read More »

All Topics