New Electrical Equipment & Systems Products

Step-Down Converter provides 3/1 A or dual 2 A outputs.

Operating from input voltage range of 2.25-5 V, LTC3546 is suited for single cell Li-Ion/polymer, or multicell alkaline/NiCad/NiMH applications. Each output is adjustable from 0.6-5 V and has turn-on supply tracking, while separate run and power good pins enable independent control of each channel. Switching frequency can be set at 2.25 MHz or is programmable from 750 kHz to 4 MHz, helping to...

PCB Terminal Blocks carry high voltage, current ratings.

Modular MRT 20 series includes 2- and 3-position interlocking housings with respective spacings of 6.35 and 9.52 mm, which allows placement together to conserve PCB space. Featuring voltage ratings to 300 V and current ratings to 30 A, UL-recognized products accept AWG 30-10 wires and suit industrial applications requiring connection directly at PCB. Nickel-plated copper body lends to...

DC-to-AC IC drives liquid lens in autofocus camera modules.

Utilizing charge-pump architecture, MAX14515 DC-to-AC liquid lens driver comes in 2 x 1 mm WLP package, reducing number of external components. It features low-voltage capacitor and bypass capacitor, and integrates 8-bit monotonic DAC with single-differential high-voltage output controlled by 2-wire IÃ-²C interface, delivering up to 42 Vrms into 200 pF liquid lens load at 1.1 kHz. Specified...

Wires and Cables are rated for use in industrial machinery.

MTW-Rated Wires and Cables use PVC insulation of sufficient thickness to comply with machine-tool wire (MTW) requirements of NFPA 79 and UL 1063 for durability and ruggedness. This flame-retardant insulation is also resistant to oil, moisture, and coolant. Rated at 600 V, products have max operating temperature of 90Ã-

Understanding Food & Beverage Lubricants

The term "food-grade lubricants" may sound like another name for food oils such as cooking spray, salad dressing, lard, or canola oil, but it actually refers to lubricants that are safe for use in food processing equipment.

Gate Drive Transformers feature 1,500 Vdc isolation.

Housed in miniature SMT packages ranging from 3-7.8 mm, HM42 Series operates from 50 kHz to 1 MHz with 1,500 Vrms insulation between primary and secondary windings. DCRs range from 0.6-2.0 W for primary winding and 0.3-2.0 W for secondary winding. Operating from -40 to +125Ã-

SiC Power Switches suit next-generation military systems.

Featuring all-silicon carbide (SiC) semiconductors, demonstration dual switch 1,200 V, 100 A power module can operate at junction temperatures to 200Ã-

SMT Connectors come in 19.05 mm mated height.

Designed for 1.27 mm pitch, board-to-board applications, B2BÃ-® High Density SMT Connectors come in 8- and 10-row configurations from 240-500 positions. Units employ screw-machined terminals with multi-finger contacts and solder ball terminal design. With current rating of 3 A/pin and stack heights from 6-19.05 mm, connectors are suited for mezzanine board stacking applications....

Switches and Latches operate in temperatures up to 150-

Models A1220 and A1221 include dynamic offset cancellation for high-temperature performance. Each unit features silicon chip with voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and short-circuit protected open-collector output that can sink up to 25 mA. On-board regulator permits operation with supply voltages of 3.0-24 V. Package types...

Non-Contact Switches are triggered by sensors.

Available in both surface mount technology and through-hole styles, non-contact capacitive switches detect changes in capacitance from proximity. Infrared version reduces influence of ambient light via internal compensating circuit, providing less false switching. They can be encased in plastic or glass, and sealed to IP68 for waterproofing. Without need to turn electromechanical contacts, units...

Power Connectors are designed for use in MicroTCA systems.

Compliant with PICMG specification, MicroTCA power connectors feature 72 signal pins, along with 24 power contacts for transmission of more than 11 A. Angled male connector is used on Advanced Mezzanine Cards for blind plugging, where as straight version of female connector is installed on backplane. Products are hot-swap capable due to leading and lagging contacts.

Acoustic and Thermal Solutions for Original Equipment Manufacturers

Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.