New Electrical Equipment & Systems Products

Smart Vibration Switch features USB programmable design.

Offering alternative to mechanical vibration switches, Model 686B01 requires only 2 wires for operation and includes Remote Reset Anywhere(TM) functionality. Embedded piezoelectric accelerometer provides accurate vibration measurement and monitors velocity. Operating from 24-240 Vac or Vdc, switch features programmable delays to avoid false trips, is hermetically sealed for use in harsh...

Rocker Switch has both single and double pole version.

Compliant with UL, cUL, VDE, and European RoHS requirements, RL3-2 has UL rating at 16 A 125 Vac and 1/3 hp 125 Vac for high power and motor applications, and standard 10 A 125 Vac for small appliances and test equipment usage. VDE rating is 10(4) A and 6(2) A 250 Vac. Unit comes with PVC cap for dust and water protection and snaps into standard panel cut-out hole.

DC-DC Converters provide 12 W of output power.

Available in compact 24-pin DIP package, VAWQ12 series of isolated board mount converters have wide 4:1 input range. It has input range from 9-36 Vdc at nominal input of 24 Vdc, or from 18-75 Vdc at nominal input of 48 Vdc. With footprint of measures 1.26 x 0.79 x 0.41 in., output voltages include 3.3, 5, 12, and 15 Vdc. Other features included are operating temperature range of -40 to 85Ã-

Hall-Effect Switch consumes low power of only 5 -µA at 3 V.

Available in TSOT or ultra-thin CSP packages, MLX90248 non-contact magnetic switch IC suits low power consumer applications like flip, slide, and clamshell portable handsets, PDA's, and personal entertainment devices. It has operating voltage of 1.5 V and offers ESD protection up to 8 kV. CMOS technology provides bounce-free, contactless solid-state switching, while Omnipolar(TM) switching...

Metal Finishing Selection Guide

This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.

A/B Switch allows sharing of DB25/X.21 BIS interface devices.

Manually controlled by front panel pushbutton or remotely via DB9 connector accepting RS232 serial data, PathWayÃ-® Model 7231 enables sharing of DB25/X.21 BIS Interface device between 2 other X.21 devices. Two-position device allows user to issue remote ASCII commands to set pushbutton-position change delay value, which is amount of time operator must hold down pushbutton before acutal...

RF Switches are offered in multi-throw versions.

Offered in 2.0 x 1.3 x 0.35 mm QFN package, RF1126 low-power SPDT symmetric switch offers insertion loss and linearity performance suitable for signal routing and antenna switching applications. Offered in 2.0 x 2.0 x 0.55 mm QFN package, SP3T symmetric switches RF1131 and RF1132 provide insertion loss of 0.32-0.49 and 0.47-0.69 dB and linearity of 59/62 dBm and 65/63 dBm, respectively, making...

Interface Converter suits RS485 multi-point applications.

ST fiber-to-multi-point RS485/422/232 interface converter Model 4152/4153 has typical operating speeds up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. It features 3 kVdc isolation to prevent system ground loops, and ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit is available in compact...

IEEE 1394 Firewire Cable Assemblies carry IP67 rating.

Suited for industrial computing applications in harsh environments, WP946PXX series features assemblies with one IP67 male to one standard 6 position male connector. Another version features one IP67 Female 6 position connector to standard 6 position male connector. Able to be utilized in applications where dust and moisture are prevalent, products can be used to connect to enclosures and panels...

Motor Softstarter includes overload protection.

Housed in 45 mm wide package with DIN rail clip, RSHL Smart Softstarter controls and protects 3-phase induction motors rated up to 5 hp at 220 Vac, 10 hp at 480 Vac, and 15 hp at 600 Vac. Soft starting and stopping can be achieved with 9 customizable voltage ramping profiles. Built-in, manually adjustable, electronic overload can be set for Class 10 or Class 20 trip characteristic and for manual...

DC/DC Converters come in IC-style surface mount packages.

Comprising 9 models with efficiency levels up to 70%, 1 Watt NTF Series is available with choice of 4-6, 9-15, and 18-36 V input voltages and tightly regulated output voltages of 5, 12, or 15 V. All devices provide 1 kVdc isolation and include voltage trim feature. Measuring 0.7 x 0.5 x 0.228 in., RoHS-compliant converters feature power density of 0.7 W/cmÃ-³, operating temperature of -40 to...

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.