New Electrical Equipment & Systems Products

SD Card Interface IC keeps card slot-featuring phones slim.

Supplied in 1.2 x 3.5 x 0.5 mm package, EMIF06-mSD02N16 helps minimize dimensional impact of integrating slot for removable memory card in cellular handsets, ultra-mobile PCs, and digital cameras. All necessary EMI filtering, ESD protection, and pull-up resistors are provided on-chip, and support for electrical or mechanical methods of detecting card insertion promotes flexibility for handset...

Driver Family Extension Meets Demands of Next Generation LEDs

BROOKLYN, NEW YORK- February 24, 2009 - The RCD series of constant current LED Drivers from Recom has been extended to a maximum of 1200mA to provide the higher currents needed by the next generation of high brightness LEDs. The RCD-24-1.0 and RCD-24-1.2 DC/DC converters deliver a stable maximum current of 1A or 1.2A respectively from a wide input voltage range of between 5V and 36VDC. The...

AC/DC Power Supply Modules suit wide range of applications.

Available in 5, 10, 15, 20, and 25 W power ratings, LH series AC/DC power supply modules accept universal 85-264 Vac input and can also accept DC input of 120-370 Vdc. They feature low leakage current, input-to-output isolation of 3,000 Vac, operating temperature range of -25 to +71Ã-

Mobile Power Inverter targets fleet vehicle applications.

Featuring GFCI protection, OSHA-compliant PowerVerterÃ-® Plus PV3000GFCI provides safe 120 V mobile power solution for trucks, lift trucks, fleet vehicles, and other mobile applications. Unit includes two 5-15R and two 5-15/20R outlets, and supplies up to 3,000 W of continuous 120 Vac power from any 12 Vdc source. Housed in lightweight metal case with integrated mounting flanges, inverter...

Choosing an Optimal Riot PPE Supplier: 5 Key Factors

This ebook provides 5 key factors to choosing an optimal riot PPE supplier.

DC-AC Inverter suits 10-17 in. industrial-grade LCD panels.

Designed for driving cold-cathode fluorescent lamps in LCD back-lighting applications, RoHS-compliant LS6D-1012A-RH provides input of 12 Vdc and output current of 3.3-6 mArms/lamp. Measuring only 7.09 x 1.46 x 0.39 in, device has power output of 5 W/lamp, or 10 W total. Other features included are 1,500 Vrms minimum start-up voltage, 2 A maximum input current and operating and storage temperature...

Stepper Motors are available in hollow shaft versions.

Hollow shaft versions of h3 stepper motors allow wires or other media to be routed through motor shaft. With neodymium iron boron magnets to optimize torque density and bearing retainer/o-ring to help minimize motor noise, 1.8Ã-

Aluminum Welding Wires meet AWS Specification A5.10.

Suitable for welding on heat exchangers, food manufacturing equipment, and transportation equipment, Smootharc(TM) 5356 consists of magnesium-based alloy that resists hot cracking, while Smootharc(TM) 4043 features higher level of silicon for optimal wetting action, and also resists weld cracking. Both wires are available in .030, .035, and 3/64 in. diameters on 1 lb spools or 12 and 16 lb reels....

Rugged Military UPS has high-power, lightweight design.

Supplied in rugged 17 x 19 x 6 in. welded aluminum chassis, Model 5320 features 2,000 VA (1,600 W) continuous output and weighs 50 lb. Nominal input ranges are 85-265 Vac (at rated load) and 70-265 (at half rated load), while 21-33 Vdc input is optionally available. AC input incorporates active power factor correction, and other UPS features include hot swappable redundant design battery pack,...

Motors and Speed Control suit continuous-duty applications.

Available in 24A and 33A frame motor sizes, 12 V PMDC Gearmotors and Motors can be built in combination with parallel shaft, hollow shaft, or right-angle gearheads with gearmotor output speeds from 5.6-660 rpm. Units range from 1/50-1/8 hp and can generate up to 310 lb-in. torque. Pulse-width-modulated Type WPM-12 Vdc Speed Control is suited for battery-powered, solar-powered, and other...

Next Generation Power and TOMCAR Join Forces

A leader in ultra-compact power solutions, Next Generation Power, has partnered with TOMCARÃ-® to offer heavy-duty, safe, off-road service vehicles equipped with state-of-the-art Next Gen diesel generators, compressors or combination generator welder compressors. Next Gen president Gino Kennedy made the announcement. Perfect for forestry, park services, remote construction projects, fire...

Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission

Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.