Optical Matrix Switch cross connects up to 192 x 192 fiber ports.
As fully non-blocking, all-optical, single-mode fiber cross-connect for up to 192 x 192 fiber ports, Series 6000 Optical Matrix Switch exhibits less than 1 dB typ optical loss. DirectLight-® beam-stearing optical switch technology allows optical connections to be established with or without light on fiber; supports transparent, protocol-agnostic connections; and can switch bi-directional and...
Read More »
Frequency Inverter suits decentralized drive solutions.
Available for motor-mounting or with wall mounting kit, SK 200E series size 4 self-cooling inverter comes in IP55-rated housing and offers functions such as sensorless current vector control, integrated brake chopper, control module for electromagnetic brake, and safety function (Safe Torque Off) as standard. User programming and operation is accomplished via choice of control boxes or NORDCON...
Read More »
AC-DC LED Driver offers 0-10 V dimming capability.
Suited for indoor/outdoor lighting applications, 50 W Model PDA050W-450G is equipped with 4 constant current outputs of 450 mA at nominal output voltage of 24.5 Vdc. With AC input range of 90-304 Vac, driver can be operated at standard North American mains voltages of 120 or 277 Vac for residential, commercial, and industrial applications. Water-resistant and fully potted with IP65 rating, driver...
Read More »
Duplex Connector features snap-in design.
Made of zinc die-cast, Whipper-SnapÃ-® Snap-In U-Shaped Strap Duplex Connector is designed for connecting .42-.61 in. cable or 3/8 in. flexible metal conduit to box or enclosure. Model SG3838ASP is suitable for maintaining grounding continuity when installed in accordance with NEC patented Whipper-Snap design.
Read More »
Selecting the Right Materials for Your Metal Stamping Project
Learn about metals and their characteristics to help you choose the right option for your unique application.
Read More »
Ligntning and Surge Protectors are designed for AC/DC control lines.
Single stage AC/DC control line lightning and surge protectors products protect 8 individual single-ended AC or DC control lines using grounding lugs to provide tie points for earth ground. Weather-resistant models are available for 12, 24, and 48 Vac and 5 Vdc lines and feature removable screw terminal strips. AC protectors feature metal oxide varistors, while DC protectors feature uni-polar...
Read More »Cast Coil Transformers
EpoxycastÃ-® is AFP Transformers, LLC, registered trademark for cast coil transformers. The cast coil process was developed in 1968 and continued development has led to their current product line of single-phase and three-phase cast coil transformers. EpoxycastÃ-® cast coil transformers are not conventional dry-type transformers. A conventional dry-type transformer is impregnated, most...
Read More »One Communications Infrastructure Platform for All, from Small to Macro
- New SoC enables operators and manufacturers to harness the merits of small cells with ease and efficiency while providing an optimal platform for differentiation through capacity improvements - Supports simultaneous dual-mode, easing operators' migration from 2G to 3G to 4G and lowering CAPEX/OPEX - First wireless infrastructure SoC to integrate ARMÃ-® Cortex(TM)-A15 cores, providing...
Read More »
Current Transformer features 10-200 kHz frequency range.
Featuring encapsulated design and 3,750 V Hi-pot, Model RL-9740 is suited for use in industrial monitoring controls and switch mode power supply applications. Thru-Hole Current Transformer meets all IEC950 insulation and VDE requirements. Housed in 19 mm high package with 4 PCB pins, device operates from -40 to +130Ã-
Read More »Silicon Timer IC requires 1 resistor and 1 capacitor.
Housed in 2 x 2 mm TDFN-8 package, Model TS3002 is fully specified to operate at 1 V while consuming 1 Ã-µA supply current at output frequency of 25 kHz. Single-supply CMOS oscillator/timer requires just 1 resistor and 1 capacitor to set output frequency. Operating from -40 to +85Ã-
Read More »
Light Dimmer works with CFL and LED bulbs.
Designed to create optimal lighting level for any activity, Harmony(TM) CFL/LED Dimmer has internal, user-adjustable dial to accommodate variety of CFL and LED bulbs and lamps. Dimmer can operate with single-pole and 3-way circuit, has 450 W rating, and does not require any derating in multi-gang applications. Packaged with interchangeable ivory, white, and light almond face colors, product...
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
