Electrical Equipment & Systems

Schneider Electric Expands Zelio Product Family For Increased Flexibility In Demanding Applications

Schneider Electric Expands Zelio Product Family For Increased Flexibility In Demanding Applications

PALATINE, Ill. - August 21, 2006 - Schneider Electric has enhanced its popular Zelio-® line of automation products with the introduction of the new Telemecanique-® brand Zelio plug-in relays, Zelio Logic 2 programmable smart relays, Zelio count counters and Zelio analog interface modules. The new family of Zelio plug-in relays is built with innovative features specifically designed to meet the...

Read More »
Motion Controller SoC eliminates need for separate circuits.

Motion Controller SoC eliminates need for separate circuits.

Mixed signal system-on-a-chip (SoC), M3000, combines building blocks necessary to control and position multi-phase step motors while also working as high-speed, general-purpose MCU with communication, analog, and system functions. Along with phase current control circuits, SoC features acceleration, velocity, and position control circuits that free up CPU to perform other system control...

Read More »
Three-Phase Monitoring Relays protect machinery and people.

Three-Phase Monitoring Relays protect machinery and people.

Provided in 177-275 Vac and 323-550 Vac ranges, DIN rail mount Series DPB71 monitors for overvoltage, undervoltage, phase sequence, and phase loss situations on 3 phase and 3 phase+ neutral systems. Capable of monitoring 50-60 Hz, Series DPC01 is available in ranges from 115 Vac delta voltage through 690 Vac delta or star voltage. Units provide True RMS monitoring for over and under voltage,...

Read More »
Safety Monitoring Relay offers configuration flexibility.

Safety Monitoring Relay offers configuration flexibility.

Able to be applied with various protective devices, SR103AM dual-channel fixed terminal relay provides control reliability. It is designed for single or dual NC inputs or dual solid-state inputs from safety light curtain and provides 3 NO outputs to route power to coils of power contactors. For signaling purposes, 1 NC auxiliary output is also included. External Device Monitoring comes standard,...

Read More »
Linear Stepper Motors feature 1-piece captive shaft.

Linear Stepper Motors feature 1-piece captive shaft.

RoHS-compliant Captive LINEARSTEP Series features anti-rotation cap that allows shaft to actuate without external guide mechanism that is required with non-captive type linear stepper motors. Units produce linear motion with 30 mm stroke and outside dimensions of 25 and 35 mm. Shaft travel in resolutions from 0.010-0.05 mm/step can yield up to 5 kg of force. Applications include laboratory...

Read More »

Cable Management Device helps make workplaces safer.

Designed to keep excess cord lengths neatly contained, Cable Capture helps eliminate potential tripping hazards and allows cords to be identified and removed or added if necessary. Full-sized unit can hold up to 8 ft of standard AC cord, while Cable Capture Jr. holds up to 6 ft of small-diameter cord. Units can be connected together to completely control, organize, and hide multiple cords and...

Read More »
Step-up DC-DC Converter suits battery-powered products.

Step-up DC-DC Converter suits battery-powered products.

Available in 6-pin SOT23 package, AS1325 features fully integrated synchronous rectifier as well as power on reset circuitry. It provides supply voltage of 1.5-3.5 V for 3.3 V output voltage or 1.5-5.0 V for 5.0 V output voltage. Supplied with under 2 V, product is capable of delivering 300 mA output current at 5.0 V output voltage or 185 mA at 3.3 V output voltage for portable products. IC...

Read More »
Step-Down DC-DC Controller draws only 40 -µA.

Step-Down DC-DC Controller draws only 40 -µA.

With 4-60 V input range, current-mode Model LTC3824 can be programmed to fixed frequency from 100-600 kHz, or synchronized to external clock over same range for noise sensitive requirements. Output voltage is adjustable from 0.8 V to VIN. Housed in 10-pin, thermally enhanced MSOP package, controller offers 100% duty cycle and is suited for automotive applications where 4 V min input voltage...

Read More »
Hardwired TCP/IP IC offloads stack for high-speed Internet.

Hardwired TCP/IP IC offloads stack for high-speed Internet.

Incorporating 10/100 Ethernet MAC, W3150A lends low-end microcontrollers near line speed Internet capabilities. It supports keep alive function and ADSL connection with PPPoE. Product also supports 4 independent, concurrent sockets and has embedded 16 KB data buffer. Also available, NM7010B network module includes W3150A, Ethernet PHY, and MAG-JACK with other glue logic to create component for...

Read More »
LED Bulb provides UV-free accent lighting with minimal heat.

LED Bulb provides UV-free accent lighting with minimal heat.

Featuring average life span of 100,000+ hr, T-10 Series is constructed for right angle illumination of objects. Solid-state design is impervious to shock, vibration, frequent switching, and environmental extremes. At 120 Vac, bulb uses 2 W of power. It comes in 3,000K warm white model that provides 98 total lumens at 40Â-

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics