DC/DC Converter offers output disconnect and soft-start.
Model LTC3526 1 MHz current mode, synchronous boost dc/dc converter has internal 500 mA switches that deliver 5 V output from 0.85-4.4 V input, making it suitable for Li-Ion/Polymer or single/multicell alkaline/NiMH applications. Available in 2 x 2 x 0.75 mm DFN package, LTC3526 delivers up to 100 mA of continuous current at 3.3 V from single alkaline cell. Synchronous rectification enables...
Read More »
Servomotor fits in small places.
With face plate measuring 1.1 in. and length of 2 in., Model M11-1 direct-drive servomotor generates 9 oz-in. of continuous torque and comes with 4,000 count/rev encoder. When combined with servo controller/drivers, NEMA 11 frame motor creates high torque servo control system at speeds up to 4,000 rpm. Requiring 1.3 A power from 12-48 V supply, motor handles inertial miss-matches of 100 x 1 and...
Read More »
SPDT Switch achieves 100% settled state within 10 -µs.
Fabricated on 0.5-micron gate-length GaAs process with full passivation, MASW-007107 features low insertion loss of 0.5 dB up to 6 GHz and 0.7 dB up to 8 GHz, and isolation of 30 dB. It is suitable for systems that require up to 27 dBm of output power with EVM less than 2% for OFDM, 64 QAM, 54 Mbps signal. This 8 GHz RoHS compliant switch is available in 2 mm 8 lead power quad flat leadless...
Read More »
DC/DC Converters suit defense and avionics applications.
Available in 5, 15, and 35 W ratings, MTC series converters meet MIL-STD 810F specification for temperature, shock, vibration, bump, altitude, and salt fog. They have input range of 15.5-40 V and can operate through transients of 10 V for 10 sec and up to 50 V for 1 sec and are suitable for systems with 28 V input. Converters minimize external circuitry and include inhibit line, output voltage...
Read More »
How to Reduce Costs for Plastic Caps, Closures and Other Packaging Products
Check out this white paper to read about the six questions to consider before selecting an injection molder for your packaging application.
Read More »
Edgeboard Connectors are used for high power applications.
Targeted for applications requiring weatherproof, medium-size RF connector with consistent performance through 18 GHz, Type N V-Bite is applied to printed circuit boards for acceptance of cable or antenna terminations. Device offers impedance of 50 W and VSWR of 1.30. Manufactured of machined brass, RoHS-compliant devices have TeflonÃ-® dielectric and snap and lock in place for secure PCB...
Read More »
LED Bulb provides direct Type 2 incandescent replacement.
Offering average life span of 100,000+ hr, TRF-G30 LED Series can be used in any situation that allows for 25 mm Edison screw base attachments. Globe covering lets LEDs shine in multiple directions and protects them from environment. Bulbs, which can output 510-970 candelas while consuming 13 W of power, have solid-state design impervious to shock, vibration, and frequent switching. Standard...
Read More »
Disconnect Terminal helps minimize maintenance time.
Accepting pluggable jumpers, WTR 2.5 Disconnect Terminal enables user to plug multiple poles in place with press to back of insulation sleeve. Disconnection can be made using supplied lever or optional pull-pin. Component plug holder converts WTR into component holder where diodes and resistors can be soldered in place. Integrated test sockets allow for 2.3 mm banana plugs to be used for...
Read More »Image Processor IC is dynamically reconfigurable.
Supplied in 1,156-pin TE-BGA package, DAPDNA-IMS dynamically reconfigurable processor (DRP) is designed for image processing in office automation applications. Flexible programmable logic chip is based on Digital Application Processor/Distributed Network Architecture (DAPDNA) and can change its hardware functionality in 5 ns utilizing 32-bit RISC core controller and heterogeneous matrix of 955...
Read More »Forward ATX Power Circuit controls desktop PC power supply.
Forward power solution for desktop power supplies and PC servers consists of flyback PWM control chip, 4-channel supervisor IC, and PFC/PWM combo control chip. Latter provides current transfer operations in Continuous Conduction Mode for power systems rated above 150 W. Solution achieves over 80% conversion efficiency under various load conditions and complies with EU harmonic wave directive....
Read More »Port Protection Devices support high-speed HDMIs.
MediaGuard CM2030 and CM2031 multifunction ASIP(TM) (Application Specific Integrated Passive(TM)) devices feature ESD, backdrive, and overcurrent protection, voltage level shifting, as well as active DDC pullups and CEC slew rate limiting. Devices connect with high speed HDMI(TM) (High-Definition Multimedia Interface(TM)) 1.3 interfaces, and are available in 38-pin TSSOP packages. CM2030 is...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
